Page 2 - Wired; Wired; Mbps; Share your USB printers; User Manual; USB Print Server
F1UP0301uk 2.4GHz • Wireless 802.11b Ethernet E Wired Mbps 10/100 Ethernet Gigabit E Wired Mbps 10/100/1000 Gigabit Ethernet 2.4GHz • Wireless High- Speed Mode 802.11g Mbps 2.4GHz • Wireless 802.11g Mbps Share your USB printers with your networked computers User Manual 2-Port USB Print Server
Page 3 - Table of Contents
11 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Home Networking Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product Features . . . . . . . . ....
Page 4 - What types of connections are used to create a home network?; Introduction
11 2 1 3 4 5 6 7 se ct io n 8 9 10 Thank you for purchasing the Belkin USB Print Server. Now you can share your USB-equipped printers with your wired network. The Belkin USB Print Server allows you to connect up to two USB printers directly to your network, eliminating the need to have a dedicated P...
Page 5 - Wireless Networking Speed
3 2 Introduction 3 2 Introduction Wireless Networking Speed Currently there are three levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation 802.11x, so named by the IEEE, the board that is responsible for certifying networking...
Page 6 - ct; Advantages of a wired network:
3 Introduction Introduction 3 Introduction 2 1 3 4 5 6 7 se ct io n 8 9 10 Advantages of a wired network: • Low cost – on average, wired networking devices are less expensive than wireless networking devices • Faster speeds – common speed is 100Mbps with recent technology providing up to 1000Mbps • ...
Page 7 - Placement of your Wireless Networking Hardware
5 4 Introduction 5 4 Introduction Placement of your Wireless Networking Hardware Please note that to ensure the performance of your wireless network, you must carefully plan the positioning of your wireless networking hardware. Examples of Wireless Networking Hardware:• Wireless Router • Wireless Ra...
Page 9 - Overview
7 6 7 6 Product Features • Integrated, easy-to-use Print Server Setup Easy Installation Wizard • Ethernet interface, for operation in virtually all Ethernet networks • Easy installation and use • LEDs: Power, Ethernet link, Status, and Error Applications and Advantages • Temporary LANs for special p...
Page 10 - Knowing your Print Server
7 Overview 7 2 1 3 4 5 6 7 se ct io n 8 9 10 Knowing your Print Server (a) PowerLED Solid: Server is ON Off: Server is OFF (b) LAN LED Solid: Connected to Ether net Off: Ether net disconnected Blinking: Transferring data Green: 10Mbps device connected Amber: 100Mbps device connected (c) Status LED S...
Page 11 - Restore Factory Defaults:
9 8 Overview 9 8 (a) Printer 1/Printer 2 These ports are used to connect one or two USB printers. Note: These ports cannot be expanded using a USB hub. (b) Ether net Port This port is used to connect the Print Server to an Ether net network via CAT5 cable. (c) Reset/Test Button (3 functions) Print P...
Page 12 - Connecting the Print Server Using the Setup Wizard
9 Connecting the Print Server Using the Setup Wizard 9 se ct io n 2 1 3 4 5 6 7 8 9 10 Make sure that each computer can print to the USB printer before installing the USB Print Server. 1. Connect your printer directly to each computer on the network and install USB printer drivers (see your printer ...
Page 14 - Setup for Advanced Users; Install Print Drivers
11 Setup for Advanced Users 11 se ct io n 2 1 3 4 5 6 7 8 9 10 Install Print Drivers Be sure to install the necessary print drivers on each computer that will be accessing the Print Server. Set Up Print Server1. Plug your printer’s USB cable (power on) into the Print Server. 2. Connect the included ...
Page 18 - Accessing the Web Configuration Menus; Web Configuration
15 15 se ct io n 2 1 3 4 5 6 7 8 9 10 Accessing the Web Configuration Menus 1. Connect the included Ether net cable into the Print Server and to an available Ether net port on your router or switch. 2. Power up the Print Server. Allow approximately one minute for the Print Server to boot and obtain ...
Page 19 - Web Interface – Home Page
17 16 Web Configuration 17 16 Web Configuration 4. Type the Print Server’s IP address into your Inter net browser from any computer. For example, if your IP address is 192.168.2.225, type “192.168.2.225” (do not type in anything else such as “http://” or “www”). Then press the “Enter” key. P74390-A ...
Page 20 - Web Interface – Login Screen
17 Web Configuration 17 se ct io n 2 1 3 4 5 6 7 8 9 10 Web Interface – Login Screen Clicking on any menu item will cause a login prompt to appear. If a password has been set previously, enter it here. New Print Servers ship without passwords; if this is the case, click “Submit” to continue. Web Int...
Page 21 - Web Interface – Print Server Configuration
19 18 Web Configuration 19 18 Web Configuration Web Interface – Print Server Configuration This menu allows the user to modify the following parameters:• Print Server Name: This field identifies the Print Server by name, and each Print Server has a unique name. Unique names are critical in a network...
Page 22 - Web Interface – System Settings (Changing Password)
19 Web Configuration 19 se ct io n 2 1 3 4 5 6 7 8 9 10 screen shown below, select the file name of the downloaded firmware, then click “Apply Changes”. The firmware upgrade will take a few minutes. Note: Do not interrupt the process by removing power from the Print Server or you could cause permane...
Page 24 - Printing to Multiple Print Servers
21 21 se ct io n 2 1 3 4 5 6 7 8 9 10 3. In the “Enter New Port” window, enter a unique name for the port and click “OK”. 4. Click “Close” on the “Printer Ports” window. 5. On the “Ports” tab, select the newly created port; click “Configure Port”. 6. On the next window (Belkin Port 2: Properties), c...
Page 26 - Belkin Port Monitor Advanced Menu
23 Belkin Port Monitor Advanced Menu 23 se ct io n 2 1 3 4 5 6 7 8 9 10 In most cases, the Belkin Port Monitor (a virtual printer port) software will be automatically installed and configured by the Print Server Setup Wizard. Some advanced users may choose to manually configure the Belkin Port Monit...
Page 27 - Adding a Second Belkin Port Monitor and Configuring It for a
25 24 Belkin Port Monitor Advanced Menu 25 24 Belkin Port Monitor Advanced Menu 3. The Advanced Menu has fields to enter the Print Server’s IP address and the queue name and the port number.Note: The port number field by default is 515. In most cases, the port number should not be changed. Adding a ...
Page 30 - Using the Print Server for FTP Printing
27 Using the Print Server for FTP Printing 27 se ct io n 2 1 3 4 5 6 7 8 9 10 Sending Print Jobs to Printers Connected to the Print Server Using FTP 1. In Windows, select the printer’s properties. 2. Set the printer port to “File”, click “Apply”.
Page 33 - Cannot find Print Server
31 30 Troubleshooting 31 30 31 30 Troubleshooting Cannot find Print Server If the Wizard cannot find your Print Server even though it appears to be functioning properly, the problem may be that the Ether net cable connected to the Print Server and Router may be loose. Check to see that the Ether net...
Page 34 - Troubleshooting
31 31 31 2 1 3 4 5 6 7 10 Troubleshooting 8 9 se ct io n If the Print Server has been configured before, and the IP address has already been set to another subnet, the best solution is to restore factory defaults on the Print Server. Do this by holding down the reset button while repowering the Prin...
Page 35 - “Cannot communicate with printer” or “printer not
33 32 Troubleshooting 33 32 33 32 Troubleshooting “Cannot communicate with printer” or “printer not found” error message appears in Printer Driver Status Monitor Again, this may result from: If those issues are addressed and the problem still exists, Belkin recommends that the user disable the Print...
Page 36 - Installation CD-ROM does not start Setup Utility
33 33 33 2 1 3 4 5 6 7 12 10 Troubleshooting se ct io n 8 9 Installation CD-ROM does not start Setup Utility If the CD-ROM does not start the Setup Utility automatically, it could be that the computer is running other applications that are interfering with the CD drive. If the Setup Utility screen d...
Page 37 - Technical Support
35 34 35 34 35 34 35 34 35 34 Troubleshooting Technical Support You can find technical support information at www.belkin.com or www.belkin.com/networking . If you want to contact technical support by phone, please call: US: 877-736-5771 Europe: 00 800 223 55 460 Australia: 1800 666 040
Page 38 - Information; FCC Statement
35 35 35 35 35 2 1 3 4 5 6 7 8 Information 9 10 se ct io n Caution: Exposure to Radio Frequency Radiation. The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such manner that the potential for human contact normal ...
