Belkin P72655 - Manual
Belkin P72655 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Device LEDs; SW2 and SW3 – Time Out setting.
- Page 5 – because each computer’s BIOS setup routine is different.; properly on both computers. If you are sharing a Zip
- Page 7 – Select Program Folder. The default is the recommended. Click NEXT.
- Page 8 – Double-click on the icon to open up the setup program:; Select the correct LPT
- Page 10 – is connected to on the Bitronics switch:
- Page 11 – Using the Bitronics Software; Example: Two Printers Shared Between Two Computers; go through the switch, out to Port B, and to the Epson printer.; Example: Sharing One Printer and a Zip
- Page 16 – 999 Belkin Components® Components; Corporate Headquarters; 01 West Walnut Street; CE Declaration of Conformity; Bitronics Switch Kit
Bitronics Switch Kit
User Manual
P72655
READ THIS MANUAL IN ITS ENTIRETY BEFORE
ATTEMPTING TO CONNECT DEVICES, THE
BITRONICS SWITCH, OR INSTALLING THE
SOFTWARE. IMPROPER SETTINGS OR
CONFIGURATIONS CAN CAUSE DATA
CORRUPTION.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 I. Introduction Thank you for purchasing the Belkin Components Bitronics DualBus Switch Kit! Now, you and your colleague can share and select between two different parallel devices from your desktop. Plus, if you are using Windows 95 or 98, you will take advantage of VirtualPort Software, whi...
Page 5 VIII. Windows 95 / 98 and NT BEFORE YOU INSTALL THE BELKIN BITRONICS SOFTWARE, YOU MUST FIRST MAKE SURE THAT EACH DEVICE WORKSPROPERLY ON ITS OWN WITH EACH COMPUTER 1. Make sure that the printer port on your computer is set to ECP mode. To do this, you must go into your computer’s BIO...
Page 7 4.5. Select destination folder. The default folder is recommended. Click NEXT. 4.6. Select Program Folder. The default is the recommended. Click NEXT.
