Belkin P72021 - Manual
Belkin P72021 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Hardware Installation:
- Page 5 – Connect a computer to the OmniView.; Cascading OmniViews; the figure below for more information:
- Page 9 – MOUSE; Check all cable connections.; Technical notes on specific devices:
- Page 11 – OTHER BELKIN PRODUCTS:
Front Photo:
Front Title:
Belkin Components
OmniView AT 6-port
“P” Part Number:
P72021
--------------Next page------------
Introduction:
Thank you for purchasing Belkin Components’ OmniView AT 6-port keyboard/video/mouse (KVM) switch!
Now, you can control multiple computers from just one keyboard, mouse and monitor. No more messy
server rooms, cluttered cables, or cramped cubicles. With the OmniView, you are in complete control!
Compatible with serial mice, and DIN5 or MiniDIN6 keyboard connectors, the OmniView is the ultimate in
flexibility. Simply use standard keyboard, mouse, and VGA cables to interface to the computers. Belkin
offers these cables in complete kits for even more convenience.
With the OmniView, you can boot up each computer without encountering any keyboard or mouse errors.
The intelligent circuitry emulates keyboard signals to prevent aborted boot sequences or lost mouse control,
often found when using manual KVM switchboxes. Furthermore, the OmniView can be
cascaded
for even
more control, up to 216 computers!
Control, convenience, efficiency. All of which, come standard with the Belkin OmniView.
Check the end of this booklet for more information on OmniView accessories!
Features:
•
Allows a user to control over as many as 216 computers from one keyboard, mouse and monitor
•
Supports serial mice
•
Supports both PS/2- and AT-style keyboards (PS/2 keyboards simply require F2N018 keyboard adapter)
•
Supports VGA, SVGA and Multisync monitors
•
Uses standard cables
•
Pushbutton or keyboard hot-key sequence switching
•
Auto scan mode and quick last/next switching modes for even more convenience
•
Audible feedback when switching
•
Recalls CAPS LOCK, NUM LOCK, and SCROLL LOCK keys’ status for each computer automatically
•
Front-panel status LEDs
•
Works with other OmniView accessories (FootSwitch and RackMount kit)
•
No software required
•
One year product warranty
Package Contents:
6-port OmniView AT
F1D065
9VDC, 600mA power supply
F1D065-PWR
This manual
P72021
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Hardware Installation: 1. Make sure you have the right cables! Before attempting to connect anything to the OmniView or the computers, make sure you have the appropriate cables and adapters (if necessary): • Serial mouse cable DB-9 male to female, with thumbscrews Part # F2N209-xx-T • AT keyboard ca...
6. Connect a computer to the OmniView. • Attach the female end of the VGA cable into the computer’s HD-DB-15 port, and the female end into a HD-DB-15 port on the OmniView. • Attach the keyboard cable into the keyboard port of the computer. Plug in the opposite end into the appropriate port on the Om...
• That is correct, the OmniView will only scan ports that have computers connected to it. It knows that something is connected to it by the power coming from the keyboard port. MOUSE Q: How do I control several computers if some use serial mice and others use PS/2? • You cannot do this using the Omn...
