Page 2 - Table Of COnTenTs; Updating Your Router via Your System Tray
Table Of COnTenTs Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 3 - Where to Place Your Router
1 GeTTInG sTaRTeD What’s in the box N150 Wireless Router Ethernet cable (attached to router) Power supply (attached to router) Network information card (attached to router) Belkin Setup CD with User Manual Initial setup Where to Place Your Router For the best results, place the Router next to your m...
Page 4 - GeTTInG sTaRTeD; modem; How to set It Up
Page 5 - . Connect your Router’s Ethernet cable to your modem’s Ethernet; Setup
3 GeTTInG sTaRTeD 1 . Connect your Router’s Ethernet cable to your modem’s Ethernet port (on the back of your modem). This port might be labeled differently on your particular modem. If you are adding a Router for the first time, this port may be connected to your computer by an Ethernet cable. It i...
Page 6 - . After a brief installation, the setup software will ask you; for the network name and password from the network
4 GeTTInG sTaRTeD 5 . After a brief installation, the setup software will ask you for the network name and password from the network information card that is attached to your Router. Store the card under the base of your Router for future reference.
Page 7 - . A progress screen will appear while additional software is
5 GeTTInG sTaRTeD 6 . A progress screen will appear while additional software is installed. This may take a few minutes to complete. Once finished, a “Success” message will appear indicating that you are connected to the Internet via your new Belkin Router. During setup you may be asked for addition...
Page 8 - network name & security – Personalize your network name
6 GeTTInG sTaRTeD advanced Tools & settings After the initial setup is complete, you have the option to change settings like your network name, security type, and password. To make these changes and others, click on the Advanced Tools icon at the CD Setup menu and select one of the following set...
Page 9 - blue: You are connected to your Belkin Router
7 GeTTInG sTaRTeD The belkin Router Manager The Belkin Router Manager appears in your system tray (Windows) or menu bar (Mac). Its icon indicates the current status of your Router and also allows you to access your Router’s settings to make changes. It also provides quick access to software that cam...
Page 10 - Manual setup Using Your browser
8 GeTTInG sTaRTeD In your browser, type “http://router” (you do not need to type in anything else such as “www”). Then press the Enter key. If you’re still having trouble running the manual setup option, type “192.168.2.1” in your browser (you do not need to type in anything else such as “http:// ” ...
Page 11 - Using the CD
9 GeTTInG sTaRTeD adding Computers to Your network Wireless devices such as computers, network printers, and gaming systems can connect to your Router with a few simple steps. Using the CD 1 . Put the Setup CD into your computer. If the CD doesn’t open automatically, browse to your CD drive and open...
Page 12 - Manually
10 GeTTInG sTaRTeD Manually If you choose not to use the included Setup CD for adding additional computers or wireless devices, you can manually add these items to your network. 1 . Locate the wireless-network-connections option on your computer or wireless device. 2 . Select your Belkin Router from...
Page 15 - Integrated 802 .11n Wireless access Point
13 TeCHnICal DeTaIls Technical features Integrated 802 .11n Wireless access Point The N150 technology enhances your Router’s wireless capabilities, allowing for data transfer speeds of up to 150Mbps across your network. naT IP address sharing To save you the cost of adding IP addresses per computer ...
Page 16 - setup software
14 TeCHnICal DeTaIls system Requirements Router Broadband Internet connection such as a cable or DSL modem with RJ45 (Ethernet) connection At least one computer with an installed network interface adapter TCP/IP networking protocol installed on each computer RJ45 Ethernet networking cable Internet b...
Page 17 - note: We recommend you use a computer that
15 UsInG YOUR ROUTeR enabling auto Update on Your belkin Router The Router has the capability to automatically check for a newer version of firmware and alert you when it’s available. You can choose to download the new version or ignore it. By default this feature is disabled. If you want to enable ...
Page 18 - UsInG YOUR ROUTeR; . Toward the lower-half side of the screen you will; find “Auto Update Firmware Enabling”.; . Select “Enable” by clicking the radio button and then; click “Apply Changes” at the bottom of the screen.; . Click on “System Settings” in the left-hand; column under the “Utilities” heading.
16 UsInG YOUR ROUTeR 16 5 . Toward the lower-half side of the screen you will find “Auto Update Firmware Enabling”. 6 . Select “Enable” by clicking the radio button and then click “Apply Changes” at the bottom of the screen.
4 . Click on “System Settings” in the left-hand column under the “Utiliti...
Page 19 - Once you have completed the setup process, you will need; . Click on the green Belkin Router Manager icon (right-click for
17 UsInG YOUR ROUTeR 17 Updating Your Router via Your system Tray (Windows) or Menu bar (Mac) Once you have completed the setup process, you will need to update the new software for your Router. This can be done easily via your computer’s system tray or menu bar. setup steps: 1 . Click on the green ...
Page 20 - . Locate and download the firmware file from the Belkin
18 UsInG YOUR ROUTeR 18 Updating the Router’s firmware via the Web Interface The following steps show you how to update your Router’s firmware using its web interface. You do not need to be connected to the Internet as this interface is built into the Router itself. setup steps: 1 . Locate and downl...
Page 21 - . Open a web browser on the computer.; Router does not ship with a password, so just click “Submit ”.; . Click on “Firmware Update” toward the
19 UsInG YOUR ROUTeR 19 4 . Open a web browser on the computer. 5 . In the address bar of the web browser, type “http://192.168.2.1” and press “Enter” on your keyboard. 6 . Click “Login” in the upper right-hand corner of the page. The Router does not ship with a password, so just click “Submit ”. 7 ...
Page 22 - . Click the “Browse” button toward the middle of the; screen to search for the file you saved previously.; note: The firmware version in the images below is; depicted as an example. Your file name will var y; . Select the firmware file by left-clicking on it and then click; the “Open” button in the lower-right corner of the window.
20 UsInG YOUR ROUTeR 20 8 . Click the “Browse” button toward the middle of the screen to search for the file you saved previously. note: The firmware version in the images below is depicted as an example. Your file name will var y depending on your model and version. 9 . Select the firmware file by ...
Page 23 - 1 . A prompt asking, “Are you sure you want to continue; respond during the upgrade and warning you not to remove
21 UsInG YOUR ROUTeR 21 10 . Click the “Update” button. 11 . A prompt asking, “Are you sure you want to continue with upgrading?” will appear. Click “OK”. 12 . A second prompt will open telling you the Router will not respond during the upgrade and warning you not to remove the power supply from the...
Page 24 - Reset button – Red; Restoring Your Router to factory Defaults
22 UsInG YOUR ROUTeR Resetting the Router Reset button – Red The “Reset ” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factor y default setting...
Page 25 - symptoms; You need to restore the factor y defaults using the web interface.; setup steps
23 UsInG YOUR ROUTeR Restoring the Router to Default settings Using the Web Interface symptoms You need to restore the factor y defaults using the web interface. This may be because the Router is not performing as expected or you wish to remove all previously configured settings. setup steps 1 . Ope...
Page 26 - . Click on “Restore Factor y Defaults” in the left-; hand column under the “Utilities” heading.; Click on the “Restore Defaults” button.
24 UsInG YOUR ROUTeR 4 . Click on “Restore Factor y Defaults” in the left- hand column under the “Utilities” heading. 5. Click on the “Restore Defaults” button.
Page 27 - . A warning box will open that says, “ Warning: All your settings; the restore is complete, the Router will reboot.
25 UsInG YOUR ROUTeR 6 . A warning box will open that says, “ Warning: All your settings will be lost. Are you sure you want to do this?” Click “OK”. 7. The Router will begin the restoring process. Once the restore is complete, the Router will reboot. note: This may take several minutes. Your Router...
Page 28 - Troubleshooting
26 TROUblesHOOTInG, sUPPORT, anD WaRRanTY Troubleshooting The setup CD does not automatically start . If Belkin Setup does not run when you insert the CD-ROM, your computer may not be configured to open CDs automatically. If Belkin Setup does not appear within 15 seconds, browse to your CD-ROM drive...
Page 32 - I’ve installed this new Router and some of my network clients
30 TROUblesHOOTInG, sUPPORT, anD WaRRanTY I’ve installed this new Router and some of my network clients (computers, game consoles, etc .) are now unable to connect . Your new Router came pre-configured with a network name and password, found printed on an attached card. All clients must use this net...
Page 35 - Technical support; Us
33 TROUblesHOOTInG, sUPPORT, anD WaRRanTY Technical support Us http://www.belkin.com/support UK http://www.belkin.com/uk /support australia http://www.belkin.com/au/support new Zealand http://www.belkin.com/au/support singapore 1800 622 1130 europe http://www.belkin.com/uk /support
Page 36 - -Year Product Warranty; What this warranty covers .
34 TROUblesHOOTInG, sUPPORT, anD WaRRanTY belkin International, Inc ., limited 2-Year Product Warranty What this warranty covers . Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, ...
Page 37 - . Your Belkin Customer Ser vice Representative will then
35 TROUblesHOOTInG, sUPPORT, anD WaRRanTY How to get service . To get ser vice for your Belkin product you must take the following steps: 1 . Contact Belkin International, Inc., at 12045 E. Waterfront Drive, Playa Vista, CA 90094, Attn: Customer Ser vice, or call (800)-223-5546, within 15 days of th...
Page 38 - How state law relates to the warranty .
36 TROUblesHOOTInG, sUPPORT, anD WaRRanTY How state law relates to the warranty . THIS WARRANT Y CONTAINS THE SOLE WARRANT Y OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANT Y OR CONDITION OF QUALIT Y, MERCHANTABILIT Y OR FITNE...
Page 39 - DeClaRaTIOn Of COnfORMIT Y WITH fCC RUles; • Reorient or relocate the receiving antenna.
37 ReGUlaTORY InfORMaTIOn fCC statement DeClaRaTIOn Of COnfORMIT Y WITH fCC RUles fOR eleCTROMaGneTIC COMPaTIbIlIT Y We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the device, f9K1001 v1, complies with Part 15 of the FC...
Page 40 - ReGUlaTORY InfORMaTIOn
38 ReGUlaTORY InfORMaTIOn Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 139 & RSS 210 Industr y Canada. This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interferen...
