Belkin F5U210 - Manual - manualsarea.com

Page 2 - TABLE OF CONTENTS

TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Assembling y...

Page 3 - INTRODUCTION

INTRODUCTION Congratulations and thank you for purchasing the Hi-Speed USB 2.0& FireWire External Drive Enclosure Kit from Belkin. Your new DriveEnclosure incorporates the amazing speed and flexibility of both theHi-Speed USB 2.0 (Universal Serial Bus 2.0) and IEEE 1394a (FireWire)interfaces in ...

Page 4 - OVERVIEW; System Requirements

OVERVIEW 2 System Requirements Hardware: Notebook or desktop computer with a USB 1.0 port, a Hi-Speed USB 2.0port, or an IEEE 1394 FireWire port. Operating System: Windows® 98 SE, Me, 2000, or XP

Page 5 - ASSEMBLING YOUR DRIVE ENCLOSURE

ASSEMBLING YOUR DRIVE ENCLOSURE 3 1. Remove top of drive bay enclosure. 2. If you are installing a 3 1 / 2 -inch hard drive, check to make sure your drive is set to “Master” (see jumper setting information printed on top of your disk drive), then connect the 34-position data cable and 4-position pow...

Page 10 - Using the FireWire Interface:; WINDOWS 98 SE DRIVER INSTALLATION

8 Using the Hi-Speed USB 2.0 Interface: 1. Insert the installation CD in your CD-ROM drive. 2. Open the Install CD. 3. Run “SETUP” to install the drivers for your Hi-Speed USB 2.0 External Drive. 4. An installer dialog box appears. Click “Next”. 5. Select “Choose Setup Component”. Click “Next”. 6. S...

Page 13 - SAFE REMOVAL OF DISK FROM WINDOWS; Safe Removal of the Hi-Speed USB 2.0 or FireWire Disk from Windows

SAFE REMOVAL OF DISK FROM WINDOWS 11 Safe Removal of the Hi-Speed USB 2.0 or FireWire Disk from Windows Windows 98 1. Click the green “Unplug or Eject Hardware” icon in system tray, selectthe device that you want to remove then click “Stop”. Note: If your drive shows up in the “My Computer” window, ...

Page 14 - FORMAT THE DRIVE; Format the External Hi-Speed USB 2.0 or FireWire Drive

12 FORMAT THE DRIVE Format the External Hi-Speed USB 2.0 or FireWire Drive Format under Windows 98 1. Boot up the computer into the Windows operating system. 2. Plug in your external drive. There are two methods to partition and format your Hi-Speed USB 2.0 orFireWire hard disk drive: Control Panel ...

Page 16 - DOS Method (Recommended for Advanced Users Only)

14 FORMAT THE DRIVE DOS Method (Recommended for Advanced Users Only) 1. Click on “Start” and choose “Programs”. Select “MSDOS”. 2. At the DOS prompt, type “FDISK” and press “Enter”. Note: If the FDISK utility terminates without displaying an error message, exit back to Windows and disconnect the Dri...

Page 17 - Partition under Windows 2000, XP

15 FORMAT THE DRIVE 5. In the “Change Current Fixed Disk Drive” screen, enter the disk drivenumber that is assigned to your external drive. IMPORTANT NOTE: Be sure that you select option 5 and change the“Current Fixed Disk” from “Disk 1” to the disk number assigned toyour external drive. If your com...

Page 19 - FCC Statement; DECLARATION OF CONFORMITY WITH FCC RULES FOR; CE Declaration of Conformity; INFORMATION

FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under oursole responsibility that the product: F5U210 to which this declaration relates:Complies with Part 15 of the FCC Rules. Opera...

Page 20 - Belkin Corporation

© 2003 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac OS and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. P74323 Belkin Corporation 501 West Walnut Street Compton • CA • 90220 • USA...

Belkin F5U210 - Manual

Table of Contents:

Summary

Other Belkin Models