Page 2 - Table of Contents
B 1. Introduction ..................................................................... 1 2. Setting Up your Network USB Hub .................................. 2 3. Using the Network USB Hub Control Center .................... 5 4. Appendix – Operation/Compatibility Notes .................... 17 5. ...
Page 3 - Introduction
EN-1 Introduction 1 2 3 4 5 Congratulations and thank you for purchasing the Network USB Hub (the Hub) from Belkin. By connecting to your network router, this innovative sharing tool gives you a great way to enhance its capabilities, as well as those of all the USB devices connected throughout your ...
Page 4 - Setting Up your Network USB Hub; The Hub works with Windows; Preparing for Setup; If you are connected to a network router that uses; Installing the Software; IMPORTANT: If you do not install the software on your
EN-2 Setting Up your Network USB Hub 1 2 3 4 5 EN-2 The Hub works with Windows ® XP and Windows Vista TM (32- and 64-bit), and Mac OS ® X (v10.3~v10.4). In order to use the Hub, you must have a networking router connecting your network. 1. Preparing for Setup NOTE: If you are connected to a network ...
Page 5 - Select a destination
EN-3 EN-3 Setting Up your Network USB Hub 1 2 3 4 5 2.2 You will see the Hub Setup CD screen. Click “Install Control Center”. 2.3 You will see the “Welcome” screen. Click “Continue”. 2.4 Select a destination in which to install the software and click “Continue”.
Page 6 - Please update your
EN-4 Setting Up your Network USB Hub 1 2 3 4 5 EN-4 2.5 Click “Install” to start the installation. 2.6 If prompted please enter name and password for authentication. 2.7 Installation is complete. Click “Restart”. Warning: Please update your firewall and Internet security software to make sure your c...
Page 7 - Using the Network USB Hub Control Center
EN-5 EN-5 Using the Network USB Hub Control Center 1 2 3 4 5 Once the setup is completed, launch the Belkin Network USB Hub Control Center through the “Start” menu. The main Control Center (see image below) gives you a visual depiction of your connection configuration. You can connect to a device by...
Page 8 - What the designations mean; Automatically connect:
EN-6 Using the Network USB Hub Control Center 1 2 3 4 5 EN-6 What the designations mean Device: Name of the device. You can change the name by clicking “Properties”. Status: Status of the device. The status changes automatically. Type: Category of the device. This is detected automatically. Automati...
Page 9 - The device is being used by someone else
EN-7 EN-7 Using the Network USB Hub Control Center 1 2 3 4 5 Not Connected: The device is being used by someone else and it is not available. You can make a request for the device by clicking “Request Use”. Unavailable: The device has been disconnected from the Hub. It will be removed from the list ...
Page 10 - Requesting a device when it is being used by someone else
EN-8 Using the Network USB Hub Control Center 1 2 3 4 5 EN-8 Requesting a device when it is being used by someone else When someone else is connected to a device that you want to use, you can make a device request. Ctrl+Click on the device in the list and select “Request Use” from the pop-up menu, o...
Page 11 - Changing the connection settings
EN-9 EN-9 Using the Network USB Hub Control Center 1 2 3 4 5 When the other user clicks “Yes”, the device will be disconnected automatically from that user’s computer and it will be available for you to use. Changing the connection settings You can set the Control Center to automatically connect to ...
Page 13 - Sharing a USB printer; You must install the printer driver on your computer; Select “This is a shared
EN-11 EN-11 Using the Network USB Hub Control Center 1 2 3 4 5 Sharing a USB printer You can set the Network USB Hub Control Center to share any USB printers on the network. Note: You must install the printer driver on your computer before enabling sharing. Note: You must install the Network USB Hub...
Page 14 - This setting has to be set on all the computers on the
EN-12 Using the Network USB Hub Control Center 1 2 3 4 5 EN-12 8. This setting has to be set on all the computers on the network to enable the sharing feature correctly.
Page 15 - Changing the Network USB Hub Control Center settings
EN-13 EN-13 Using the Network USB Hub Control Center 1 2 3 4 5 Changing the Network USB Hub Control Center settings Click the “General” link, under “Common Tasks” on the left of the “Control Center” screen to open the “Network USB Hub settings” window.
Page 17 - Accessing the Network USB Hub hardware setting
EN-15 EN-15 Using the Network USB Hub Control Center 1 2 3 4 5 Accessing the Network USB Hub hardware setting Click the “Network USB Hubs” link, under “Common Tasks”, on the left side of the “Control Center” screen to open the “Network USB Hub settings” window.
Page 18 - Resetting the Network USB Hub
EN-16 Using the Network USB Hub Control Center 1 2 3 4 5 EN-16 Select and click the Network USB Hub from the list. Then click “Properties”. Your web browser will launch and open the web page built into the Network USB Hub. From there, you can change the advanced network settings and update the firmw...
Page 19 - Appendix – Operation/Compatibility Notes; Certain USB devices may not be compatible with the Hub.
EN-17 EN-17 Appendix – Operation/Compatibility Notes 1 2 3 4 5 Certain USB devices may not be compatible with the Hub. Since the Network USB Hub uses virtual network technology, some USB devices (e.g., TV tuners, webcams, and USB audio devices) are not compatible with it in Mac OS. They will not app...
Page 20 - Information; Belkin International, Inc., Limited Lifetime Product Warranty; FCC Statement
EN-18 Information 1 2 3 4 5 EN-18 CE Declaration of Conformity We, Belkin International, Inc., declare under our sole responsibility that the F5L009, to which this declaration relates, is in conformity with Generic Emissions Standard EN55022:1998 Class B, EN50081-1, and with Generic Immunity Standar...