Page 2 - Table of Contents
Table of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 Knowing...
Page 3 - Introduction; ct
Introduction 2 1 3 4 5 6 se ct io n Thank you for purchasing the Phone Adapter . This User Manual provides instructions for installing and configuring the Phone Adapter . In minutes, you will be able to place phone calls to any location in the world using your standard phone equipment and your broad...
Page 4 - Key Features; Product Overview
3 2 3 Key Features Voice over Internet Phone Dialing This exciting, new technology allows you to place calls over your existing broadband Inter net connection with the same quality and functionality as your standard telephone service . Compatible with both PCs and Mac ® Computers The Phone Adapter s...
Page 6 - Knowing your Phone Adapter; Package Contents; Router requirements:
5 4 5 Knowing your Phone Adapter Package Contents • Phone Adapter• RJ45 Ether net Networking Cable• RJ Phone Cord• Power Supply• User Manual• Quick Installation Guide• Features Overview System Requirements • Broadband Inter net service, such as cable or DSL• Unused LAN port on a router Router requir...
Page 7 - Product Specifications
5 4 5 se ct io n 2 1 3 4 5 6 Product Specifications Standards IEEE 802 .3u 0/00Base-Tx Fast Ether net (WAN) Protocols Supported SIP, CSMA/CD, TCP/IP, UDP, DHCP (client) Voice Compression G .7, G .729 Management Browser-Based User Interface Ports 0/00Base-Tx auto-sensing RJ45 port, WAN2 FXS voice por...
Page 8 - Resetting the Phone Adapter
7 6 Knowing your Phone Adapter 7 (a/b) Phone Ports These ports are for connection to your telephone handset . Use the RJ cable that was provided with the Phone Adapter to connect the telephone to these ports . (c) Connection to Router This port is for connection to your router . Use the cable that w...
Page 9 - LEDs
7 6 Knowing your Phone Adapter Knowing your Phone Adapter 7 se ct io n 2 1 3 4 5 6 (e) Power Jack Connect the included 5VDC, 2 .4A power supply to this jack . When you apply power to the Phone Adapter or restart it, a short period of time elapses while the Phone Adapter starts up (about 30 seconds) ...
Page 10 - Router Requirements; Determining your Current Network and Connection
9 8 Connecting and Configuring your Phone Adapter 9 Router Requirements Your cable or DSL router must be equipped with an RJ45 Ether net port . Many routers have both an RJ45 Ether net port and a USB connection . If you have a router with both Ether net and USB, and you are using the USB connection ...
Page 11 - Connecting your Phone Adapter to a Gateway/Router
9 8 Connecting and Configuring your Phone Adapter Connecting and Configuring your Phone Adapter 9 se ct io n 2 1 3 4 5 6 Connecting your Phone Adapter to a Gateway/Router Installing the Phone Adapter as a client to a router that already exists. 1. Identify an available LAN port on your existing rout...
Page 12 - Troubleshooting
0 Troubleshooting Problem: • Phone Adapter is not working .• LEDs do not come on . Solution: If the LED indicators are not ON, the problem may be that the Phone Adapter is not connected properly . Verify that the Phone Adapter is plugged into a power source . Check to see that the cables are connect...
Page 14 - Technical Support
3 2 Troubleshooting 3 Technical Support You can find technical support information at http://www .iinet .net .au or contact iiNet customer support on 3 22 58 .
Page 15 - FCC Statement
3 2 Troubleshooting Information 3 se ct io n 2 1 3 4 5 6 FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 50 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, FPG200ENau to which this decl...
Page 16 - Information; Modifications
5 4 Information 5 Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the user’s authority to operate the equipment . Canada-Industry Canada (IC) The wireless radio of this device compl...
Page 17 - Belkin Corporation Limited 2-Year Product Warranty
5 4 Information Information 5 se ct io n 2 1 3 4 5 6 Belkin Corporation Limited 2-Year Product Warranty Belkin Corporation warrants this product against defects in materials and workmanship for 2 years . If a defect is discovered, Belkin will, at its option, repair or replace the product at no charg...
Page 18 - ATA Hardware Setup
Belkin, Inc . Belkin International, Inc . 4 Pioneer Avenue, Tuggerah Business Park 50 West Walnut Street Tuggerah NSW 2259, Australia Los Angeles,CA, 90220, USA ATA Hardware Setup For Advanced trouble shooting, technical support and VoIP setup please call our dedicated Belkin ATA support hotline on:...