Page 2 - Table of Contents
Table of Contents 1. Introduction .............................................................................................1 Package Contents ........................................................................... 1 2. Overview ...................................................................
Page 3 - section; Package Contents; Introduction
1 1 2 3 4 5 6 7 section Congratulations and thank you for purchasing this Belkin OmniView Secure DVI Dual-Link KVM Switch (the Switch). Designed especially for secure military and government installations, the Switch provides the centralized control required by today’s IA (Information Assurance) com...
Page 4 - Security Features; Overview
2 Security Features • Dedicated Processors Designed specifically for secure environments, the Switch features a dedicated processor per computer port. This keeps each computer running on different security levels completely separated and secure at all times, and prevents any unintended data transfer...
Page 5 - Other Features
3 1 2 3 4 5 6 7 section 3 Overview Other Features • USB Support The Switch is compatible with USB 1.1 and USB 2.0 technology and supports Plug-and-Play connectivity with USB computers, keyboards, and mice. • Dual-Link DVI Support The Switch supports video resolutions of up to 2560x1600. This include...
Page 6 - Equipment Requirements; Cables
4 Overview Equipment Requirements Cables Belkin highly recommends you use Belkin DVI/USB KVM Cable Kits with Audio & Mic for your Switch to help ensure superior performance. These cables offer the highest quality possible to ensure optimal data and audio video transmission. One Cable Kit is requ...
Page 7 - System Requirements; Keyboards; Microphone
5 1 2 3 4 5 6 7 section Overview System Requirements Operating-System (OS) Platforms The Switch is compatible with computers running on, but not limited to, the following OS platforms: • Windows ® 2000 • Windows XP (Home/Professional)• Windows 2003 Server• Windows Vista ® • Red Hat ® Linux ® Desktop...
Page 8 - Unit Display Diagrams; Front View
66 Overview Unit Display Diagrams Front View (F1DN104Dea model shown) Back View Tamper-Evident Seals Side View IMPORTANT NOTICE: There should be one tamper-evident seal on each side of the Switch enclosure (total of two seals). If both seals are visible and do not appear to be disrupted, your Switch...
Page 9 - Specifications; Interchangeable AC Plugs:
7 1 2 3 4 5 6 7 section Overview Specifications Part No.: F1DN102Dea, F1DN104Dea Enclosure: Metal enclosure with high-impact plastic faceplate Power Requirements: 5V DC, 3A (minimum) power adapter with center-pin-positive polarity 4 AC Input: 100 to 240VAC Interchangeable AC Plugs: 4 (U.S., U.K., Eu...
Page 10 - Installation
8 Before you begin, please take a few minutes to register your product. This may assist Belkin in contacting you regarding important information regarding secure use of your product. You may register your product online by going to https://www.belkin.com/registration/. Pre-Configuration Where to pla...
Page 12 - Step 2 Connecting the Console to the Switch
10 10 10 Installation Step 2 Connecting the Console to the Switch (required) Warning: Before attempting to connect anything to the Switch or your computers, please ensure that all computer equipment and devices are powered off. Plugging and unplugging cables while computers are powered on may cause ...
Page 13 - Step 3 Connecting Computers to the Switch
11 1 2 3 4 5 6 7 section Installation Step 3 Connecting Computers to the Switch (required) 3.1 Make sure all computers and the Switch are powered off. 3.2 Using the Belkin DVI/USB KVM Cable Kit (F1D9201b-XX), connect the male DVI connector to the monitor port on your computer. Then connect the other...
Page 14 - Step 4 Powering Up the Systems
12 Installation Step 4 Powering Up the Systems (required) 4.1 Power on the attached monitor. 4.2 Attach the power adapter to the DC power jack labeled “5V, 3A” on the back of the Switch. Only use the power adapter supplied with the Switch. (Refer to diagram below.) 4.3 Power on your computers. All c...
Page 15 - Using your Switch; Selecting a Computer Using Port Selectors
13 section 1 2 3 4 5 6 7 Using your Switch Selecting a Computer Using Port Selectors Now that you have connected your console and computers to the Switch, it is ready for use. You can select which computer you wish to control by pressing the corresponding port selector on the front of the Switch. Th...
Page 16 - Frequently Asked Questions
14 Frequently Asked Questions What does NIAP Common Criteria validation to EAL 4 mean? To learn more about NIAP Common Criteria and EAL 4, visit http://www.niap-ccevs.org/cc-scheme/consumer-guidance.cfm. What do I do if I find that the tamper-evident seals on the Switch have been removed or disrupte...
Page 17 - Does the Switch support Linux?; General; My computer does not boot when connected to the Switch but; Video; I am getting ghosting, shadowing, or fuzzy images on my monitor.
15 1 2 3 4 5 6 7 section Frequently Asked Questions Does the Switch support Linux? Yes, the Switch works with Red Hat Linux and some Linux operating systems configured for USB support. Does the Switch support Microsoft ® IntelliMouse ® ? The Switch supports mice from Belkin, Microsoft, Logitech ® , ...
Page 18 - Keyboard; The computer does not detect my keyboard, or my keyboard does; Troubleshooting
16 Keyboard The computer does not detect my keyboard, or my keyboard does not work when I switch computers or reboot. • Check that the keyboard you are using is connected properly to the Switch. • Check that the USB cable between the Switch and the computer is firmly connected. • Try connecting to a...
Page 19 - Mouse; The computer does not detect my mouse, or my mouse does not
17 1 2 3 4 5 6 7 section Troubleshooting Mouse The computer does not detect my mouse, or my mouse does not work when I switch computers or reboot. • Check that the mouse you are using is connected properly to the Switch. • Check that the USB cable between the Switch and the computer is completely co...
Page 20 - Information; FCC Statement; Declaration of Conformity with FCC Rules; CE Declaration of Conformity; What this warranty covers.; What will we do to correct problems?
Information 18 FCC Statement Declaration of Conformity with FCC Rules for Electromagnetic Compatibility We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the products: F1DN102Dea, F1DN104Dea, to which this declaration relates: Co...
Page 21 - How state law relates to the warranty.
19 Information section 1 2 3 4 5 6 7 How to get service. To get service for your Belkin product you must take the following steps: 1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA 90220, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepa...
