Belkin F1DA116T - Manual
Belkin F1DA116T – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – | Page 1 of 1; Self Help Guide; Pro 2 KVM Firmware Update Instructions; | Page 2 of 4
- Page 3 – | Page 3 of 4; Text; Once open, click on the
- Page 4 – | Page 4 of 4
®
Self Help Guide
TSG-UK-1-001 | www.belkin.com
| Page 1 of 1
®
Self Help Guide
IMPORTANT!
This Guide refers to the
following Products:
Pro 2 KVM Firmware Update Instructions
F1DA116T
PS/2 & USB
Synopsis:
Please read the following carefully;
Requirements:
This guide will assist you in updating the firmware
of your Belkin OmniView Pro 2 KVM Switch.
Please be advised that firmware updates tend to
be to resolve specific issues and if there is any
doubt if the firmware will resolve your issue you
should check with Technical Support.
To perform the Firmware Upgrade successfully
you will need the following equipment;
•
Pro 2 KVM
•
12 V DC 1A KVM Power Supply (supplied)
•
RJ45-DB25 Flash Update Cable (supplied)
•
PC with Windows 2000 or XP and Parallel Port
•
Firmware Update File
•
NTPDA Update
You will also need to ensure that any Firewall or
Anti-Virus Software is disabled on the Computer
you will be using to upgrade the Firmware from.
F1DA108T
PS/2 & USB
TSG-UK-2-001 | www.belkin.com
| Page 1 of 4
F1DA104T
PS/2 & USB
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
® Self Help Guide TSG-UK-1-001 | www.belkin.com | Page 1 of 1 ® Self Help Guide Pro 2 KVM Firmware Update Instructions TSG-UK-2-001 | www.belkin.com | Page 2 of 4 OSD | For firmware specifically designed to resolve On-Screen Display Issues. KEYBOARD | #1 For firmware specifically designed to resolve...
® Self Help Guide TSG-UK-1-001 | www.belkin.com | Page 1 of 1 ® Self Help Guide TSG-UK-2-001 | www.belkin.com | Page 3 of 4 Text Step 3 Plug the supplied Firmware Update Cable in to the (DB25) Parallel Port of a stand-alone Computer (i.e. one that is not currently connected to and controlled by the ...
® Self Help Guide TSG-UK-1-001 | www.belkin.com | Page 1 of 1 ® Self Help Guide TSG-UK-2-001 | www.belkin.com | Page 4 of 4 Text Step 5 Providing the Flash Upgrade is being performed successfully, you should see a Window with a Progress Bar similar to that shown below. Step 6 Once the Firmware Upgra...
