Beckett AFII - Manual
Beckett AFII – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Remainder of manual to be used ONLY BY; Contents
- Page 4 – General Information; Section: General Information
- Page 5 – Installation Site; Clearances to Burner and Appliance; fl; Do NOT operate the burner beyond speci; Special Requirements
- Page 6 – Section: Inspect/Prepare Installation Site
- Page 7 – Direct/Sidewall Venting Application; Figure 3; Combustion Air Supply Information; Failure to provide adequate air supply could; Figure 2 - Chimney Design - Above the Roof; Appliances located in con; Figure 3. Outside Air Connection
- Page 8 – Prepare the Burner; Damage to the pump could cause impaired burner; Install the oil tank following applicable standards
- Page 9 – Figure 6. – Mounting Burner in Appliance; Section: Mount Burner on Appliance & Wire Burner; Mount Burner on Appliance; Verify that the air tube installed on the burner provides; Wire Burner; Burner packaged with appliance; Electrical shock can cause severe; Electrical Shock Hazard; Connect Fuel Lines; Failure to comply could cause Immediate pump seal; When installing a
- Page 10 – Burner Controls; Wiring; Section: Burner Controls; Can cause severe injury, death, or property; Fire or Explosion Hazard; All heating appliances must have HIGH; Optional Components
- Page 11 – Typical Burner Sequence of Operation for GeniSys 7505 Control.
- Page 12 – Table 2 - Reset Button Operation; Reset Button Operation; Table 2
- Page 13 – Control System Features
- Page 14 – Set combustion with instruments; Figures 8a; Note that; could cause erratic cycling of the burner control.; Section: Start Up Burner and Set Combustion; Failure to prime the pump properly could result in
- Page 15 – Perform Regular Maintenenance; Tampering with or making incorrect; Section: Perform Regular Maintenance
- Page 16 – Shutting the Burner Off; Incorrect nozzles and; Nozzle Installation
- Page 17 – Figure 10a. HLX Air Tube; Check/Adjust Electrodes; Check the electrode tip settings, as shown in; Blower Wheel Replacement
- Page 19 – Item Description; Replacement Parts
- Page 20 – Guelph, Ontario N1G 3X7; ts, products must be installed by a; Limited Warranty Information
RESIDENTIAL BURNERS
Potential for Fire, Smoke and Asphyxiation Hazards
To the Homeowner or Equipment Owner:
Please read and carefully follow all instructions
provided in this manual regarding your
responsibilities in caring for your heating
equipment.
Contact a professional, quali
fi
ed service agency for
installation, start-up or service work.
Save this manual for future reference.
y
y
y
Incorrect installation, adjustment, or misuse of this burner could result in death, severe
personal injury, or substantial property damage.
To the Professional, Quali
fi
ed Installer or Service Agency:
Please read and carefully follow all instructions provided
in this manual before installing, starting, or servicing this
burner or heating system.
The Installation must be made in accordance with all state
and local codes having jurisdiction.
y
y
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 AFII Burner Manual To the Owner: Thank you for purchasing a Beckett burner for use with your heating appliance. Please pay attention to the Safety Warnings contained within this instruction manual. Keep this manual for your records and provide it to your quali fi ed service agency for use in profe...
4 General Information Section: General Information Hazard De fi nitions Within the boundaries of the hazard warning, there will be information presented describing consequences if the warning is not heeded and instructions on how to avoid the hazard. Indicates a hazardous situation, which, if not av...
5 AFII Burner Manual Inspect/Prepare Installation Site Clearances to Burner and Appliance Provide space around burner and appliance for ease of service and maintenance. Check the minimum clearances against those shown by the appliance manufacturer and by applicable building codes. Combustion Chamber...
