Bakers Pride VGH-Series - Manual

Rotisserie Ventless Hood Introduction 3 This message indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. This message is used when special information, instructions or identification are re...

Rotisserie Ventless Hood Introduction 4 Protect Children Keep children away from this equipment. Children may not understand that this equipment is dangerous for them and others. NEVER allow children to play near or operate your equipment. Keep Safety Labels Clean and in Good Condition Do not remove...

Rotisserie Ventless Hood 5 ETL Information Failure to adhere to building, fire and electrical codes during installation of this unit could result in death, serious injury or property damage. The authority having jurisdiction, such as the local building inspector or fire marshal, should be consulted ...

Rotisserie Ventless Hood Installation 6 Installation Unpacking and Handling Inspection for Shipping Damage YOU are responsible for filing all freight claims with the delivering truck line. Inspect all cartons and crates for damage as soon as they arrive. If damage to cartons or pallets is found, or ...

Rotisserie Ventless Hood Installation 7 Wiring Electrocution, equipment failure or property damage could result if an unlicensed electrician performs the electrical installation. Ensure that a licensed electrician perform the electrical installation. In the event of an appliance fire, serious injury...

Rotisserie Ventless Hood 8 Baffle Grease / Odor Filter These filters will come already installed in the hood. If not, follow the steps below to install the filters. 1. Remove the filter(s) from the plastic bag. 2. Open the hood and filters doors on the front of the unit by pulling on the handles. 3....

Rotisserie Ventless Hood Operation 9 Operation Principles of Operation The hood requires a VGG rotisserie power supply, a two-wire connections tapped into the control circuits of the VGG it is mounted to, and the activation of a simple On / Off switch to operate. The wiring change to the VGG ensures...

Rotisserie Ventless Hood Operation 10 Preparation The following conditions must be met for the Filter Hood to function: • The charcoal odor filter must be installed. • The grease baffle must be installed. • The filters door and hood doors must be shut. • Power must be supplied to the hood from the V...

Rotisserie Ventless Hood Operation 11 an indication to the operators that the filter needs to be changed soon. Theoretically, the hood may be operated with 100% dirty filter (however, hood performance will be affected), as the hood is not designed to shut-down with dirty filters. In low to medium vo...

Rotisserie Ventless Hood Maintenance 12 Maintenance Electrocution could occur if this unit is hosed down with water. This unit is NOT designed for hose wash-down cleaning! Refer to scheduled maintenance below for proper hood cleaning. Electrocution could occur if power is not removed from this unit ...

Rotisserie Ventless Hood Maintenance 13 Cleaning the Grease Baffle 1. Shut down the unit. 2. Open the front Hood door and Filters door, and slide out the grease baffle from the unit. 3. Spray the grease baffle with degreasing type soap. 4. Rinse with hot water; dry, and replace in hood. Replacing th...