Axis Q8108-R - Manual

Page 6 AXIS Q8108-R User’s Guide Unit connectors 8 PoE network connectors - RJ-45 Ethernet connectors. Provides power to up to 8 network cameras that are PoE enabled Class 1. The PoE ports are divided into a left and right group of four. A maximum load of 16W is allowed per group. For example, a PoE...

AXIS Q8108-R User’s Guide Page 7 ENGL IS H Pin assignment - I/O connector LED indicators Pin number Function Notes Specifications 1 Output 1 Open collector NPN transistor with the emitter connected to ground when activated.Outputs are reserved for developer use. Max load = 500mA 2 Output 2 3 Input 1...

Page 8 AXIS Q8108-R User’s Guide Install the hardware Before you begin There are a few considerations before installing the AXIS Q8108-R. • The AXIS Q8108-R casing is designed to mount directly on any surface using a minimum of 4 screws appropriate for the surface type • The operating temperature ra...

AXIS Q8108-R User’s Guide Page 9 ENGL IS H Connect the cables 1. Install up to 8 Axis network cameras according to their Installation Guides.2. Connect cameras to AXIS 8108-R via RJ-45 PoE connectors, which will provide both power and network connection to each camera. 3. Optionally connect external...

Page 10 AXIS Q8108-R User’s Guide Mounting Hard Disk AXIS Q8108-R supports the use of up to 2 separate hard disk. Follow these instructions and consult manufacturer’s recommendations to mount or change hard disk. 1. Remove the back cover.2. Power off the AXIS Q8108-R, see Start up and shut down, on ...

AXIS Q8108-R User’s Guide Page 11 ENGL IS H Start up and shut down The AXIS Q8108-R starts up automatically when power is supplied. See AXIS NVR Manager, on page 13 for more options. The AXIS Q8108-R automatically does a controlled shut down after one minute when the power is shut off. Internal powe...

Page 12 AXIS Q8108-R User’s Guide Set up your computer This section will help you install AXIS NVR Manager and AXIS Camera Station Client and configure it for your Axis NVRs and Axis Network Cameras. A brief introduction to the functionality of the software is covered here. For more information see ...

AXIS Q8108-R User’s Guide Page 13 ENGL IS H AXIS NVR Manager 1. Connect to the NVR directly via a network cable or through the network and make sure that power has been applied. 2. Start AXIS NVR Manager. 3. AXIS NVR Manager will automatically discover all NVRs that are in the same network. Note tha...

Page 14 AXIS Q8108-R User’s Guide AXIS Camera Station AXIS Camera Station Client is for monitoring, recording, playback and event management. Connect AXIS Camera Station Client From AXIS NVR Manager select an NVR device and click the Launch AXIS Camera Station Client icon or start AXIS Camera Statio...

AXIS Q8108-R User’s Guide Page 15 ENGL IS H Technical Specifications Function/ group Item Specification Model AXIS Q8108-R System Processor 1.1GHz Intel Atom Z5 series CPU RAM 1GB SODIMM DDR2 System disk Compact Flash PATA drive 4GB Operating system Windows Embedded Standard 2009 Battery backup Cont...