Axis Q1765-LE PT - Manual

AXIS Q1765–LE PT Mount Network Camera Hardware Overview Power Connector 2-pin terminal block for power input. Use a Safety Extra Low Voltage (SELV) compliant limited power source (LPS) with either a ratedoutput power limited to ≤ 100 W or a rated output current limited to ≤ 5 A. RS485/RS422 Connecto...

AXIS Q1765–LE PT Mount Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows,Safari wit...

AXIS Q1765–LE PT Mount Network Camera Access the Product The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings on page 47 . To set the password vi...

AXIS Q1765–LE PT Mount Network Camera Access the Product Controls on the Live View Page Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG. Select a stream profile for the Live View page from the Stream Profile drop-down list. For information about h...

AXIS Q1765–LE PT Mount Network Camera Access the Product The Play button connects to the Axis product and starts playing a media stream. The Stop button stops the media stream. The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specified in the AMC ...

AXIS Q1765–LE PT Mount Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine thetype you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and...

AXIS Q1765–LE PT Mount Network Camera Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for moreinformation. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AM...

AXIS Q1765–LE PT Mount Network Camera Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access ...

AXIS Q1765–LE PT Mount Network Camera Video Video It is possible to configure the following video features in your Axis product: • Video stream. See page 15 . • Stream profiles. See page 16 . • Camera settings. See page 17 . • Overlay image. See page 19 . • Privacy mask. See page 21 . Video Stream Y...

AXIS Q1765–LE PT Mount Network Camera Video H.264 H.264, also known as MPEG-4 Part 10/AVC, is a video compression standard that provides high quality video streams at low bit rates.An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete ima...

AXIS Q1765–LE PT Mount Network Camera Video Camera Settings The Video > Camera Settings page provides access to advanced image settings for the Axis product. Capture Mode The capture mode setting reduces image flicker in fluorescent light environments as image data is sampled at a rate that match...

AXIS Q1765–LE PT Mount Network Camera Video White Balance White balance is used to make colors in the image appear the same regardless of the color temperature of the light source. The Axisproduct can be set to automatically identify the light source and compensate for its color. Alternatively, sele...

AXIS Q1765–LE PT Mount Network Camera Video When Shutter and Gain are both set to Auto , it is possible to set the Priority between low motion blur and low noise manually and to use a different Priority in Normal Light and in Low Light . ExampleConsider an area where people or vehicles move during t...

AXIS Q1765–LE PT Mount Network Camera Video Use Overlay Text in an Action Rule Action rules, see page 31 , can display an overlay text when the rule is triggered. The text can be used to provide information for forensic video analysis, notify surveillance operators or validate triggers and actions d...

AXIS Q1765–LE PT Mount Network Camera Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 16 . • Default Viewer for Brow...

AXIS Q1765–LE PT Mount Network Camera Configure the Live View Page User Defined Links To display user-defined links in the Live View page, select the Show custom link option, give the link a name and then enter the URL to link to. When defining a web link do not remove the 'http://' from the URL add...

AXIS Q1765–LE PT Mount Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a saved view that can be used to quickly steer the camera to a specific position. A preset position consists ofthe following values: • Pan and tilt positions • Focus position Preset po...

AXIS Q1765–LE PT Mount Network Camera PTZ (Pan Tilt Zoom) Advanced Device Settings The Device Settings window displays driver specific settings. The appearance of this window can vary depending on the driverinstalled. Options that can be configured include: • Driver Specific Settings for Video Sourc...

AXIS Q1765–LE PT Mount Network Camera PTZ (Pan Tilt Zoom) 1. Administrator — An administrator takes over PTZ control regardless of who is first in queue. The administrator will be removed from the queue 60 seconds after the last PTZ control command. 2. Event — The Axis product can be configured to g...

AXIS Q1765–LE PT Mount Network Camera Detectors Detectors Shock Detection Enable Shock Detection from the Detectors menu. Shock detection is used, for example, to generate an alarm if the product is hit by an object. Use the Shock sensitivity slider to adjust the sensitivity level at which the produ...

AXIS Q1765–LE PT Mount Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and cou...

AXIS Q1765–LE PT Mount Network Camera Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and ...

AXIS Q1765–LE PT Mount Network Camera Events 2. Enter a descriptive name. 3. Select a recipient Type . 4. Enter the information needed for the recipient type. 5. Click Test to test the connection to the recipient. 6. Click OK . Set Up Email Recipients Email recipients can be configured by selecting ...

AXIS Q1765–LE PT Mount Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 34 . • To set up action rules, see page 31 . • To access recordings, see Recording List on page 34 ....

AXIS Q1765–LE PT Mount Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and loc...

AXIS Q1765–LE PT Mount Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to a...

AXIS Q1765–LE PT Mount Network Camera System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless networkdevices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by...

AXIS Q1765–LE PT Mount Network Camera System Options 3. Click Create certificate signing request and provide the requested information. 4. Copy the PEM-formatted request and send to the CA of your choice. 5. When the signed certificate is returned, click Install certificate and upload the certificat...

AXIS Q1765–LE PT Mount Network Camera System Options IPv6 Address Configuration If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router. To enable IPv6, go to System Options > Network > TCP/IP > Basic . Other settin...

AXIS Q1765–LE PT Mount Network Camera System Options AXIS Video Hosting System (AVHS) AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible fromany location. For more information and help to find a local AVHS Service Provider go...

AXIS Q1765–LE PT Mount Network Camera System Options Select Use the host name to set the host name manually. Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes. For more information, see the online help . Link-Local IPv4 Address L...

AXIS Q1765–LE PT Mount Network Camera System Options Enable/Disable - When enabled, the Axis product attempts to configure port mapping in a NAT router on your network, using UPnP TM . Note that UPnP TM must be enabled in the product (see System Options > Network > UPnP ). Use manually selecte...

AXIS Q1765–LE PT Mount Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is thegroup of devices and management station running SNMP. Community names are used to identify groups. To enable and configure SNMP...

AXIS Q1765–LE PT Mount Network Camera System Options Storage SD Card NO NO NOTICE TICE TICE To prevent corruption of recordings, the SD card should always be unmounted before it is ejected. Note For SD card recommendations see www.axis.com Supports microSD cards with up to 64 GB of storage. For best...

AXIS Q1765–LE PT Mount Network Camera System Options Ports & Devices COM Port The Axis product has one RS-485/RS-422 serial port. The port supports the following modes: • Generic HTTP allows the Axis product to receive data and send commands via HTTP. • Pan Tilt Zoom is used to control a PTZ dev...

AXIS Q1765–LE PT Mount Network Camera System Options Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also Troubleshooting on page 48 . System Overview To ...

AXIS Q1765–LE PT Mount Network Camera System Options File Upload Files, for example webpages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, goto System Options > Advanced > File Upload . Uploaded files are accessed through http://<ip address&g...

AXIS Q1765–LE PT Mount Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain ...

AXIS Q1765–LE PT Mount Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problem...

AXIS Q1765–LE PT Mount Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if otherread or write problems occur. To identify the source of the problem, check the System ...

AXIS Q1765–LE PT Mount Network Camera Technical Specifications Technical Specifications Function/group Item Specifications Models AXIS Q1765-LE PT Mount Image sensor 1/2.9” progressive scan RGB CMOS Lens Varifocal f=4.7 – 84.6 mmF1.6 — 2.8AutofocusAutomatic day and nightfunctionalityHorizontal angle...

AXIS Q1765–LE PT Mount Network Camera Technical Specifications Function/group Item Specifications Casing IP66- and NEMA 4X-rated, impact resistant metal casing (aluminum) Memory 256 MB RAM, 128 MB Flash Power 8-28 VDC, max 13.7 W20-24 VAC max 20.2 VAPower over Ethernet IEEE 802.3af/802.3atType 1 Cla...

AXIS Q1765–LE PT Mount Network Camera Technical Specifications RS485/422 Connector Two 2-pin terminal blocks for RS485/RS422 serial interface. The serialport can be configured to support: • Two-wire RS485 half duplex• Four-wire RS485 full duplex• Two-wire RS422 simplex• Four-wire RS422 full duplex p...