Page 3 - Support
Safety This product complies with IEC/EN 60950-1 and IEC/EN 60950-22,Safety of Information Technology Equipment. The product shall begrounded either through a shielded network cable (STP) or otherappropriate method.The power supply used with this product shall fulfill the requirementsfor Safety Extr...
Page 4 - AXIS P5532–E PTZ Dome Network Camera; Safety Information; Hazard Levels; DANGER; Other Message Levels
AXIS P5532–E PTZ Dome Network Camera Safety Information Safety Information Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTI...
Page 5 - Table of Contents
AXIS P5532–E PTZ Dome Network Camera Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Other Message Levels ....
Page 7 - Hardware Overview; Connectors and Buttons; Network Connector
AXIS P5532–E PTZ Dome Network Camera Hardware Overview Hardware Overview 1 2 3 4 6 5 1. Network connector 2. Part number (P/N) & Serial number (S/N). Serial number may be required during installation. 3. Control button 4. SDHC card slot 5. Status indicator LED 6. Restart button Connectors and Bu...
Page 8 - SD Card Slot; Control Button; Restart Button; LED Indicators
AXIS P5532–E PTZ Dome Network Camera Hardware Overview SD Card Slot NO NO NOTICE TICE TICE • Risk of damage to SD card. Do not use sharp tools or excessive force when inserting or removing the SD card. • Risk of data loss. To prevent data corruption, the SD card should be unmounted before removal. T...
Page 9 - Access the Product; Access from a Browser; Access from the Internet
AXIS P5532–E PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ®...
Page 10 - Set the Root Password; The Live View Page
AXIS P5532–E PTZ Dome Network Camera Access the Product Set the Root Password To access the Axis product, you must set the password for the default administrator user root . This is done in the Configure Root Password dialog, which appears when the product is accessed for the first time. To prevent ...
Page 11 - Controls on the Live View Page; Manual Trigger; AXIS Media Control viewer toolbar
AXIS P5532–E PTZ Dome Network Camera Access the Product Controls on the Live View Page Select a stream profile for the Live View page from the Stream Profile drop-down list. For information about how to configure stream profiles, see page 18 . The Manual Trigger button is used to trigger an action r...
Page 12 - PTZ Controls
AXIS P5532–E PTZ Dome Network Camera Access the Product The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specified in the AMC Control Panel. Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on t...
Page 13 - Media Streams; MJPEG
AXIS P5532–E PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Your requirements and the properties of your network will determine thetype you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and ...
Page 14 - Settings; Alternative Methods of Accessing the Video Stream; Motion JPEG server push
AXIS P5532–E PTZ Dome Network Camera Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for moreinformation. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC...
Page 16 - Set Up the Product; Setup; Basic Setup
AXIS P5532–E PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access t...
Page 17 - Video; Set Up Video Streams; Pixel Counter
AXIS P5532–E PTZ Dome Network Camera Video Video It is possible to configure the following video features in your Axis product: • Video stream. See page 17 . • Stream profiles. See page 18 . • Camera settings. See page 19 . • Overlay image. See page 20 . • Privacy mask. See page 21 . Set Up Video St...
Page 18 - Stream Profiles
AXIS P5532–E PTZ Dome Network Camera Video H.264 H.264, also known as MPEG-4 Part 10/AVC, is a video compression standard that provides high quality video streams at low bit rates.An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete imag...
Page 19 - Camera Settings; Image Appearance
AXIS P5532–E PTZ Dome Network Camera Video Camera Settings The Video > Camera Settings page provides access to advanced image settings for the Axis product. Image Appearance Increasing the Color level increases the color saturation. The value 100 gives maximum color saturation. The value 0 gives ...
Page 20 - Image Settings; Overlay; Overlay Image
AXIS P5532–E PTZ Dome Network Camera Video Image Settings Important The autofocus behavior is affected by factors such as light conditions, contrasts in the scene, and objects moving in and out. Inthese conditions or scenes, a manual focus could be preferable to enhance performance and allow the cam...
Page 21 - Privacy Mask
AXIS P5532–E PTZ Dome Network Camera Video To automatically scale the image to the resolution used by the Axis product, select the option Scale with resolution from the Transparency Settings page which is displayed when uploading in the image. To upload an overlay image: 1. Go to Video > Overlay ...
Page 22 - Configure the Live View Page; Default Viewer for Browsers
AXIS P5532–E PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 18 . • Default Viewer for Brows...
Page 23 - User Defined Links
AXIS P5532–E PTZ Dome Network Camera Configure the Live View Page • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control (AMC...
Page 24 - Access the Preset Positions; Set the Home Position; Gatekeeper
AXIS P5532–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a saved view that can be used to quickly steer the camera to a specific position. A preset position consists ofthe following values: • Pan and tilt positions • Zoom position • Focus pos...
Page 25 - Guard Tour; Advanced; Limits
AXIS P5532–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) It is also possible to, for example, record video or save images (take a snapshot) while the Gatekeeper is active. Go to Events and set up an action rule with PTZ Preset Reached as trigger. Guard Tour A guard tour displays the video stream fro...
Page 26 - Controls
AXIS P5532–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) x Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed. When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt ...
Page 27 - Control Queue
AXIS P5532–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) Note Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move topreset positions that require a tilt movement. Control Queue Note • The administrator can enable and disab...
Page 28 - Detectors; Motion Detection; Set Up Motion Detection Windows; Motion Detection Parameters
AXIS P5532–E PTZ Dome Network Camera Detectors Detectors Motion Detection Motion detection is used to generate an alarm whenever movement starts or stops in the camera view. Motion detection is configured by defining up to 10 Include and Exclude windows: • Include windows — define areas where motion...
Page 29 - Recommended values
AXIS P5532–E PTZ Dome Network Camera Detectors High level (100%) Only very large objects triggermotion detection. An object that appears inthe window triggers motiondetection for a long timebefore it is considered asnon-moving. Ordinary colored objects onordinary backgrounds triggermotion detection....
Page 30 - Applications; Application Licenses
AXIS P5532–E PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and coun...
Page 32 - Events; Convert Event Types to Action Rules; Set Up Action Rules
AXIS P5532–E PTZ Dome Network Camera Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and w...
Page 33 - Triggers
AXIS P5532–E PTZ Dome Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 30 . • Detectors - Motion Detection – Trigger the rule whe...
Page 34 - Add Recipients; Recipient Types; Create Schedules
AXIS P5532–E PTZ Dome Network Camera Events • Record Video – Record video to a selected storage. • Send Images – Send images to a recipient. • Send Notifications – Send a notification message to a recipient. Add Recipients The product can send media files and messages to notify users about events. B...
Page 35 - Set Up Recurrences
AXIS P5532–E PTZ Dome Network Camera Events Set Up Recurrences Recurrences are used to trigger action rules repeatedly, for example every 5 minutes or every hour. To set up a recurrence: 1. Go to Events > Recurrences and click Add . 2. Enter a descriptive name and recurrence pattern. 3. Click OK ...
Page 36 - Recordings; Recording List
AXIS P5532–E PTZ Dome Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 36 . • To set up action rules, see page 32 . • To access recordings, see Recording List on page 36 . ...
Page 37 - System Options; Security; Users
AXIS P5532–E PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to al...
Page 39 - Network; Basic TCP/IP Settings; IPv4 Address Configuration; Assign IP Address Using ARP/Ping
AXIS P5532–E PTZ Dome Network Camera System Options If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration on page 41 . • Set manually – Allows you to manually set date and time. If using an NTP server, select your Time zone from the drop-down list. If requir...
Page 40 - AXIS Internet Dynamic DNS Service
AXIS P5532–E PTZ Dome Network Camera System Options Linux/Unix syntax arp -s <IP address> <serial number> tempping -s 408 <IP address> Linux/Unix example arp -s 192.168.0.125 00:40:8c:18:10:00 tempping -s 408 192.168.0.125 Windows syntax (this may require that you run the command p...
Page 41 - Advanced TCP/IP Settings
AXIS P5532–E PTZ Dome Network Camera System Options Advanced TCP/IP Settings DNS Configuration DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced . Select Obtain DNS server addr...
Page 42 - NAT traversal; Use manually selected NAT router -; SOCKS
AXIS P5532–E PTZ Dome Network Camera System Options NAT traversal (port mapping) for IPv4 A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwardingnetwork traffic from the private network to the “outside”, that is, the Interne...
Page 43 - SNMP; UPnP
AXIS P5532–E PTZ Dome Network Camera System Options QoS (Quality of Service) QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware networkprioritizes network traffic and provides a greater network reliability by controlling the amou...
Page 44 - Bonjour; SD Card; Mount and Unmount SD Card
AXIS P5532–E PTZ Dome Network Camera System Options RTP/H.264 The RTP port range and multicast settings are configured under System Options > Network > RTP . The RTP port range defines the range of ports from which the video ports are automatically selected. For multicast streams, onlycertain ...
Page 45 - Format SD Card; Network Share; Maintenance
AXIS P5532–E PTZ Dome Network Camera System Options 3. Click Unmount . 4. The card can now be removed. Format SD Card NO NO NOTICE TICE TICE Formatting the SD card will remove all data and recordings stored on the card. Important If autoformat is enabled, only use new or empty SD cards. Any data sto...
Page 46 - Support Overview; System Overview
AXIS P5532–E PTZ Dome Network Camera System Options Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings. Note A restart clears all entries in the Server Report. Click Restore to reset most settings to the factor...
Page 47 - Scripting; File Upload
AXIS P5532–E PTZ Dome Network Camera System Options Parameter List - Shows the product's parameters and their current settings. This may prove useful when troubleshooting or when contacting Axis Support. Connection List - Lists all clients that are currently accessing media streams. Crash Report - G...
Page 49 - Troubleshooting; Check the Firmware
AXIS P5532–E PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain a...
Page 50 - Symptoms, Possible Causes and Remedial Actions; Problems setting the IP address; The product cannot be accessed from a browser; The product is accessible locally but not externally; Basic
AXIS P5532–E PTZ Dome Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems...
Page 52 - Storage and disk management problems; Condensation in dome
AXIS P5532–E PTZ Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if otherread or write problems occur. To identify the source of the problem, check the System L...
Page 53 - Technical Specifications
AXIS P5532–E PTZ Dome Network Camera Technical Specifications Technical Specifications Function/group Item Specifications Model AXIS P5532-E 50 Hz, AXIS P5532-E 60 Hz Image sensor ExView HAD Progressive scan CCD 1/4” Lens f=3.6 – 104.4 mm, F1.43 – 3.67, autofocus, automatic day/nightHorizontal angle...
Page 55 - Item; Performance Considerations
AXIS P5532–E PTZ Dome Network Camera Technical Specifications Function/group Item Specifications Videomanagementsoftware (notincluded) AXIS Camera Station — Video management software for viewing and recording up to 50camerasSee www.axis.com/products/video/software/ for more software applications via...
