Axis P5414E - Manual

AXIS P5414–E PTZ Dome Network Camera Hardware Overview Hardware Overview 1 2 3 4 5 6 7 8 1 Control button 2 Status LED indicator 3 SD memory card slot 4 Audio connector 5 I/O connector 6 Power connector 7 Network connector (PoE+) 8 Part number (P/N) & Serial number (S/N) Connectors and Buttons F...

AXIS P5414–E PTZ Dome Network Camera Hardware Overview I/O Connector Use in applications for e.g. motion detection, event triggering, time lapse recording and alarm notifications. In addition to anauxiliary power and a GND pin, the I/O terminal connector provides the interface to: • Digital output –...

AXIS P5414–E PTZ Dome Network Camera Accessing the Product Accessing the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows,Safar...

AXIS P5414–E PTZ Dome Network Camera Accessing the Product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you mustconfigure your network router to allow incoming data traffic to the product. To do this, ena...

AXIS P5414–E PTZ Dome Network Camera Accessing the Product Click the Active/Inactive buttons to manually activate and inactive the product’s output port. For information about how to enable and configure output buttons, see page 25 . The Manual Trigger button is used to trigger an action rule from t...

AXIS P5414–E PTZ Dome Network Camera Accessing the Product Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view. The Record button is used to record the current video stream. The location where the r...

AXIS P5414–E PTZ Dome Network Camera Accessing the Product Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that ...

AXIS P5414–E PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Your requirements and the properties of your network willdetermine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video str...

AXIS P5414–E PTZ Dome Network Camera Media Streams The AMC Control Panel can be used to configure various video and audio settings. Please see the AXIS Media Control User’sManual for more information. The AMC Control Panel is automatically installed on first use, after which it can be configured. Op...

AXIS P5414–E PTZ Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guaran...

AXIS P5414–E PTZ Dome Network Camera Setting Up the Product Setting Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted ...

AXIS P5414–E PTZ Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality. You can configure the following: • Video stream settings. See page 17 . • Stream profiles. See page 18 . • Camera settings. See page 18 . • Overlay image...

AXIS P5414–E PTZ Dome Network Camera Video and Audio • Rotate image . If required, the image can be rotated. • Maximum frame rate . To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixed amount. Alternatively, the frame rate can be set as Unlimited , which means...

AXIS P5414–E PTZ Dome Network Camera Video and Audio Image Appearance Increasing the Color level increases the color saturation. The value 100 gives maximum color saturation. The value 0 gives a black and white image. The image Brightness can be adjusted in the range 0–100, where a higher value prod...

AXIS P5414–E PTZ Dome Network Camera Video and Audio Gain , measured in decibel (dB), is the amount of amplification applied to the image. A high gain may provide a better image in low light situations but will increase the amount of image noise. Set Gain to • Auto to set the gain automatically. If ...

AXIS P5414–E PTZ Dome Network Camera Video and Audio Overlay Image An overlay image is a static image superimposed over the video stream. The image, for example company logo, is used to provideextra information or to mask a part of the image. Since it is static, the position and size of an overlay i...

AXIS P5414–E PTZ Dome Network Camera Video and Audio Privacy Mask A privacy mask is an area of solid color that prohibits users from viewing parts of the monitored area. Privacy masks cannot bebypassed via the VAPIX® Application Programming Interface (API). The Privacy Mask List, Video & Audio &...

AXIS P5414–E PTZ Dome Network Camera Video and Audio • Yellow — the signal is becoming distorted. • Red — the signal is distorted. Use the Encoding option to select digital audio encoding format. • AAC requires a license for both encoding and decoding. AAC is the least complicated and most widely us...

AXIS P5414–E PTZ Dome Network Camera Live View Config Live View Config You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 18 . • Default Viewer for Browser. See page 24 . • View...

AXIS P5414–E PTZ Dome Network Camera Live View Config Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG). QuickTime H.264. Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of thefollowing installed on the client: • JVM (J2SE) 1.4.2 o...

AXIS P5414–E PTZ Dome Network Camera Live View Config - Pulse activates the output for a defined period of time. The pulse time can be set from 1/100 second to 60 seconds. - Active/Inactive displays two buttons, one or each action. To configure the active and inactive states, go to System Options &g...

AXIS P5414–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a predefined view that can be used to quickly steer the camera to a specific location. Preset positions canbe accessed in several ways: • By selecting the preset from the Preset positio...

AXIS P5414–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) Gatekeeper The Advanced Gatekeeper monitors an area such as an entrance gate. When motion is detected in the monitored area, the Gatekeeperwill steer the camera to a selected preset position. Using a zoomed-in preset position can make it possi...

AXIS P5414–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) Click Get to set the coordinates. Proceed to where the upper right point of zone should be located and click Get . Give the zone a descriptive name and click OK . To include the name of the OSDI zone in the overlay text, go to Video & Audi...

AXIS P5414–E PTZ Dome Network Camera Detectors Detectors Motion Detection Motion detection is used to generate an alarm whenever movement starts or stops in the camera view. Motion detection is configured by defining up to 10 Include and Exclude windows: • Include windows — define areas where motion...

AXIS P5414–E PTZ Dome Network Camera Detectors Motion Detection Parameters The parameters controlling motion detection are described in the table below: Parameter Object Size History Sensitivity Description Object size relative to windowsize. Object memory length. Difference in luminancebetween back...

AXIS P5414–E PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and coun...

AXIS P5414–E PTZ Dome Network Camera Events Events The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion isdetected. The set of conditions that defines how and when the action is triggered is called an Action Rule . Available Ac...

AXIS P5414–E PTZ Dome Network Camera Events - Recording — triggers the rule when the Axis product records to the storage device. The recording status trigger can be used to notify the operator, for example by flashing LED lights, if the product has started or stopped torecord to the storage device. ...

AXIS P5414–E PTZ Dome Network Camera Events 6. Under Actions , select Record Video from the Type drop-down list. 7. Select a Stream profile and configure the Duration settings as described below. 8. Select Network Share from the Storage drop-down list. To add additional criteria, select the Addition...

AXIS P5414–E PTZ Dome Network Camera Events 2. Enter a descriptive name. 3. Select a recipient Type . 4. Enter the information needed for the recipient type. 5. Click Test to test the connection to the recipient. 6. Click OK . Setting Up an Email Recipient Email recipients can be configured by selec...

AXIS P5414–E PTZ Dome Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 40 . • To set up action rules, see page 36 . • To access recordings, see Recording List, on page 40 ....

AXIS P5414–E PTZ Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and loca...

AXIS P5414–E PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to al...

AXIS P5414–E PTZ Dome Network Camera System Options 2. Select an HTTPS certificate from the list of installed certificates. 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the ...

AXIS P5414–E PTZ Dome Network Camera System Options To install a self-signed certificate: 1. Go to System Options > Security > Certificates . 2. Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate: 1. Create a self-signed ce...

AXIS P5414–E PTZ Dome Network Camera System Options Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one versionmust always be enabled. IPv4 Address Configuration By default, the Axis product is set to us...

AXIS P5414–E PTZ Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restar...

AXIS P5414–E PTZ Dome Network Camera System Options Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable. NTP Configuration NTP (Network Time Protocol) is used to synchroniz...

AXIS P5414–E PTZ Dome Network Camera System Options Enable/Disable - When enabled, the Axis product attempts to configure port mapping in a NAT router on your network, using UPnP TM . Note that UPnP TM must be enabled in the product (see System Options > Network > UPnP ). Use manually selected...

AXIS P5414–E PTZ Dome Network Camera System Options Enter the host names or IP addresses and port numbers for the primary and secondary mail servers in the fields provided. A From email address is also required. If the mail server requires authentication, check Use authentication to log in to this s...

AXIS P5414–E PTZ Dome Network Camera System Options Bonjour The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operatingsystems and clients that support this protocol. Bonjour can be disabled under System Options > Network >...

AXIS P5414–E PTZ Dome Network Camera System Options To add a network share: 1. Go to System Options > Storage . 2. Click Network Share . 3. Enter the IP address, DNS or Bonjour name to the host server in the Host field. 4. Enter the name of the share in the Share field. Sub folders cannot be used...

AXIS P5414–E PTZ Dome Network Camera System Options For information about firmware upgrade, see Upgrading the Firmware, on page 55 . Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require...

AXIS P5414–E PTZ Dome Network Camera System Options To open the Script Editor, go to System Options > Advanced > Scripting . If a script causes problems, reset the product to its factory default settings, see page 53 . For more information, see www.axis.com/developer File Upload Files, for exa...

AXIS P5414–E PTZ Dome Network Camera Repainting the Camera Repainting the Camera The covers can be repainted to match the installation environment. The material used in the covers is ASA Geloy XTWM206. Use paint suitable for this material. 1. Remove the two top cover screws. 2. Use a thin palette kn...

AXIS P5414–E PTZ Dome Network Camera Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contai...

AXIS P5414–E PTZ Dome Network Camera Troubleshooting arp -s <IP address> <serial number> tempping -l 408 <IP address> In Windows , type the following from a command/DOS prompt (this may require that you run the command prompt as an administrator): arp -s <IP address> <seri...

AXIS P5414–E PTZ Dome Network Camera Technical Specifications Function/group Item Specifications Casing IP66– and NEMA 4X–rated metal casing (aluminum), clear dome (PC), sunshield (ASA) memory 256MB RAM, 128 MB Flash Power Power over Ethernet Plus (PoE+) IEEE 802.3at Type 2 Class 4, max 30W20–28 V D...

AXIS P5414–E PTZ Dome Network Camera Technical Specifications Digital input — Connect to GND to activate, or leave floating(unconnected) to deactivate. 0 to +30 V DC Configurable(Input or Output) 3–6 Digital output — Internal connection to ground whenactivated, floating (unconnected) when deactivate...

AXIS P5414–E PTZ Dome Network Camera Technical Specifications Function Pin Notes Microphone/Line in 1 Microphone or line in (mono) GND 2 Ground Line out 3 Line audio out GND 4 Ground SD Card Slot Supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card ...