Axis P3365-VE - Manual

AXIS P3365-VE Fixed Dome Network Camera Hardware Overview Network Connector RJ45 Ethernet connector with Power over Ethernet (PoE). NO NO NOTICE TICE TICE Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded networkcable (STP) may be ...

AXIS P3365-VE Fixed Dome Network Camera Hardware Overview LED Indicators Note • The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED . See the online help for more information. • The Status LED can be co...

AXIS P3365-VE Fixed Dome Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows,Safari w...

AXIS P3365-VE Fixed Dome Network Camera Access the Product To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPScertificate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traffic between web browsers and...

AXIS P3365-VE Fixed Dome Network Camera Access the Product The Manual Trigger button is used to trigger an action rule from the Live View page. For information about how to configure and enable the button, see Manual Trigger on page 11 . Click Snapshot to save a snapshot of the video image. This but...

AXIS P3365-VE Fixed Dome Network Camera Access the Product AMC Audio Controls AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible whenaudio is enabled. Speaker button — Click to turn the speakers on or off. Microphone button – Click to...

AXIS P3365-VE Fixed Dome Network Camera Access the Product Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that ...

AXIS P3365-VE Fixed Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Your requirements and the properties of your network willdetermine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video ...

AXIS P3365-VE Fixed Dome Network Camera Media Streams The AMC Control Panel can be used to configure various video and audio settings. Please see the AXIS Media Control User’sManual for more information. The AMC Control Panel is automatically installed on first use, after which it can be configured....

AXIS P3365-VE Fixed Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not ...

AXIS P3365-VE Fixed Dome Network Camera Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted acces...

AXIS P3365-VE Fixed Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality. You can configure the following: • Video stream settings. See page 18 . • Stream profiles. See page 20 . • Camera settings. See page 20 . • View areas...

AXIS P3365-VE Fixed Dome Network Camera Video and Audio Stream Profiles A stream profile is a set of predefined stream settings including resolution, compression, frame rate and overlay settings. Streamprofiles can be used: • When setting up recording using action rules. See Events on page 38 . • Wh...

AXIS P3365-VE Fixed Dome Network Camera Video and Audio Exposure control - This setting is used to adapt to the amount of light used. Automatic is the default setting and can be used in most situations. The shutter speed is automatically set to produce optimum image quality. Flicker-free 50 or 60 Hz...

AXIS P3365-VE Fixed Dome Network Camera Video and Audio If using automatic Exposure control , set the IR cut filter to Auto to automatically switch between On and Off according to the lighting conditions. The camera lens is IR corrected, which means that it maintains focus in mixed light, however a ...

AXIS P3365-VE Fixed Dome Network Camera Video and Audio 2. To include an overlay image, select Include overlay image at the coordinates . The overlay image must first be uploaded to the Axis product, see Overlay Image . 3. To include date and time, select Include date and Include time . 4. To includ...

AXIS P3365-VE Fixed Dome Network Camera Video and Audio 3. To control the image’s position, enter the X and Y coordinates. The X=0 and Y=0 position is the top left corner. If a part of the image is positioned outside the video image, the overlay image will be moved so that the whole image is visible...

AXIS P3365-VE Fixed Dome Network Camera Video and Audio For installation instructions, refer to the product’s Installation Guide. To set focus and zoom: 1. Install the camera as described in the Installation Guide. 2. Go to Video & Audio > Focus & Zoom . 3. On the Basic tab, set the zoom ...

AXIS P3365-VE Fixed Dome Network Camera Video and Audio Audio Input An external microphone or a line source can be connected to the Audio-in connector. Configure the audio input settings under Video & Audio > Audio Settings . Note The internal microphone is used by default; the external micro...

AXIS P3365-VE Fixed Dome Network Camera Video and Audio Audio Output An external speaker can be connected to the Audio-out connector (a built-in amplifier is required for this). The output can beconnected to another amplifier with speakers. A stereo connector must be used for the audio out. Configur...

AXIS P3365-VE Fixed Dome Network Camera Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 20 . • Default Viewer for Br...

AXIS P3365-VE Fixed Dome Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is availab...

AXIS P3365-VE Fixed Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas,see View Area on page 22 . Preset Positions A preset position is a saved view that ca...

AXIS P3365-VE Fixed Dome Network Camera PTZ (Pan Tilt Zoom) 3. Specify the pause length between runs. 4. Select an available preset position and click Apply . 5. Specify the View Time in seconds or minutes. 6. Specify the View Order or select the Random view order option. 7. Click Save . To modify o...

AXIS P3365-VE Fixed Dome Network Camera PTZ (Pan Tilt Zoom) 5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed on to the next viewer in queue. 32

AXIS P3365-VE Fixed Dome Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severelydefocused. To send an alarm, for example an email, an action rule must be set up. To configure tamp...

AXIS P3365-VE Fixed Dome Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position...

AXIS P3365-VE Fixed Dome Network Camera Detectors Note • To trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • To avoid triggering on small objects, select a high object size. • While monitoring an area where...

AXIS P3365-VE Fixed Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and c...

AXIS P3365-VE Fixed Dome Network Camera Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how an...

AXIS P3365-VE Fixed Dome Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 36 . • Detectors - Audio Detection – Trigger the rule w...

AXIS P3365-VE Fixed Dome Network Camera Events • System - System Ready – Trigger the rule when the product has been started and all services are running. This can for example be used to send a notification when the product restarts. • Time - Recurrence – Trigger the rule periodically. See Set Up Rec...

AXIS P3365-VE Fixed Dome Network Camera Events Recipient Types The following recipients are available: Recipient Use with action Notes Email Send Images Send Notification Send Video Clip An email recipient can contain multiple email addresses. Formore information about email recipients, see Set Up E...

AXIS P3365-VE Fixed Dome Network Camera Events Create Schedules Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outsideoffice hours. Use one of the predefined schedules or create a new schedule as described below. To create...

AXIS P3365-VE Fixed Dome Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 43 . • To set up action rules, see page 38 . • To access recordings, see Recording List on page 43...

AXIS P3365-VE Fixed Dome Network Camera Recordings 5. Click Save to save and start the recording. 44

AXIS P3365-VE Fixed Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and l...

AXIS P3365-VE Fixed Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to...

AXIS P3365-VE Fixed Dome Network Camera System Options 2. Select an HTTPS certificate from the list of installed certificates. 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable t...

AXIS P3365-VE Fixed Dome Network Camera System Options A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained. To install a self-signed certificate:...

AXIS P3365-VE Fixed Dome Network Camera System Options Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one versionmust always be enabled. IPv4 Address Configuration By default, the Axis product is set to...

AXIS P3365-VE Fixed Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then res...

AXIS P3365-VE Fixed Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host n...

AXIS P3365-VE Fixed Dome Network Camera System Options Note • For NAT traversal to work, this must be supported by the router. The router must also support UPnP TM . • In this context, router refers to any network routing device such as a NAT router, Network router, Internet Gateway, Broadband route...

AXIS P3365-VE Fixed Dome Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is thegroup of devices and management station running SNMP. Community names are used to identify groups. AXIS Video MIB (Management...

AXIS P3365-VE Fixed Dome Network Camera System Options Bonjour The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operatingsystems and clients that support this protocol. Bonjour can be disabled under System Options > Network ...

AXIS P3365-VE Fixed Dome Network Camera System Options Important If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is insertedinto the Axis product. An SD card inserted into the product can be manually formatted to one of the supported f...

AXIS P3365-VE Fixed Dome Network Camera System Options Maintenance The Axis product provides several maintenance functions. These are available under System Options > Maintenance . Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any...

AXIS P3365-VE Fixed Dome Network Camera System Options Access Log - Lists all failed attempts to access the product. The Access Log can also be configured to list all connections to the product (see below). Server Report - Provides information about the product status in a pop-up window. The Access ...

AXIS P3365-VE Fixed Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contai...

AXIS P3365-VE Fixed Dome Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Probl...

AXIS P3365-VE Fixed Dome Network Camera Technical Specifications Function/group Item Specifications Operatingconditions -40 °C to 55 °C (-40 °F to 131 °F) humidity 10 - 100% RH (condensing) Approvals EN 55022 Class B, EN 50121-4, EN 55024, EN 61000-6-1, EN 61000-6-2, EN 50581FCC Part 15 Subpart B Cl...

AXIS P3365-VE Fixed Dome Network Camera Technical Specifications Digital Input 3 Connect to pin 1 to activate, or leave floating (unconnected)to deactivate 0 to max 40 V DC Digital Output 4 Connected to pin 1 when activated, floating (unconnected)when deactivated. If used with an inductive load, e.g...