Axis P3365-V - Manual

AXIS P3365-V Fixed Dome Network Camera Hardware Overview NO NO NOTICE TICE TICE Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded networkcable (STP) may be appropriate or required. All cables connecting the product to the network a...

AXIS P3365-V Fixed Dome Network Camera Hardware Overview LED Indicators Note • The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED . See the online help for more information. • The Status LED can be con...

AXIS P3365-V Fixed Dome Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows,Safari wi...

AXIS P3365-V Fixed Dome Network Camera Access the Product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you mustconfigure your network router to allow incoming data traffic to the product. To do this, enab...

AXIS P3365-V Fixed Dome Network Camera Access the Product Set Power Line Frequency Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 54 ) or by resetting the product to factory default. Select the power line frequency (50 Hz o...

AXIS P3365-V Fixed Dome Network Camera Access the Product Manual Trigger The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and configuration. To configure the manual trigger: 1. Go ...

AXIS P3365-V Fixed Dome Network Camera Access the Product Use the slider to control the volume of the speakers and the microphone. Half-duplex mode The Talk/Listen button is used to switch between sending and receiving audio. The button can be configured from the Audio tab in the AMC Control panel: ...

AXIS P3365-V Fixed Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Your requirements and the properties of your network willdetermine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video s...

AXIS P3365-V Fixed Dome Network Camera Media Streams The AMC Control Panel can be used to configure various video and audio settings. Please see the AXIS Media Control User’sManual for more information. The AMC Control Panel is automatically installed on first use, after which it can be configured. ...

AXIS P3365-V Fixed Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not g...

AXIS P3365-V Fixed Dome Network Camera Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access...

AXIS P3365-V Fixed Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality. You can configure the following: • Video stream settings. See page 18 . • Stream profiles. See page 20 . • Camera settings. See page 20 . • View areas....

AXIS P3365-V Fixed Dome Network Camera Video and Audio Stream Profiles A stream profile is a set of predefined stream settings including resolution, compression, frame rate and overlay settings. Streamprofiles can be used: • When setting up recording using action rules. See Events on page 37 . • Whe...

AXIS P3365-V Fixed Dome Network Camera Video and Audio Exposure control - This setting is used to adapt to the amount of light used. Automatic is the default setting and can be used in most situations. The shutter speed is automatically set to produce optimum image quality. Flicker-free 50 or 60 Hz ...

AXIS P3365-V Fixed Dome Network Camera Video and Audio If using automatic Exposure control , set the IR cut filter to Auto to automatically switch between On and Off according to the lighting conditions. The camera lens is IR corrected, which means that it maintains focus in mixed light, however a s...

AXIS P3365-V Fixed Dome Network Camera Video and Audio 2. To include an overlay image, select Include overlay image at the coordinates . The overlay image must first be uploaded to the Axis product, see Overlay Image . 3. To include date and time, select Include date and Include time . 4. To include...

AXIS P3365-V Fixed Dome Network Camera Video and Audio 3. To control the image’s position, enter the X and Y coordinates. The X=0 and Y=0 position is the top left corner. If a part of the image is positioned outside the video image, the overlay image will be moved so that the whole image is visible....

AXIS P3365-V Fixed Dome Network Camera Video and Audio For installation instructions, refer to the product’s Installation Guide. To set focus and zoom: 1. Install the camera as described in the Installation Guide. 2. Go to Video & Audio > Focus & Zoom . 3. On the Basic tab, set the zoom l...

AXIS P3365-V Fixed Dome Network Camera Video and Audio Audio Input An external microphone or a line source can be connected to the Audio-in connector. Configure the audio input settings under Video & Audio > Audio Settings . Note The internal microphone is used by default; the external microp...

AXIS P3365-V Fixed Dome Network Camera Video and Audio Audio Output An external speaker can be connected to the Audio-out connector (a built-in amplifier is required for this). The output can beconnected to another amplifier with speakers. A stereo connector must be used for the audio out. Configure...

AXIS P3365-V Fixed Dome Network Camera Configure the Live View Page Configure the Live View Page You can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page. • Stream Profile. See page 20 . • Default Viewer for Bro...

AXIS P3365-V Fixed Dome Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is availabl...

AXIS P3365-V Fixed Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas,see View Area on page 22 . Preset Positions A preset position is a saved view that can...

AXIS P3365-V Fixed Dome Network Camera PTZ (Pan Tilt Zoom) To disable specific controls, deselect the options under Enable/Disable controls . If using multiple view areas, deselecting a control will only disable the control in the selected view area. Control Queue Note • The administrator can enable...

AXIS P3365-V Fixed Dome Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severelydefocused. To send an alarm, for example an email, an action rule must be set up. To configure tampe...

AXIS P3365-V Fixed Dome Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position ...

AXIS P3365-V Fixed Dome Network Camera Detectors Note • To trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • To avoid triggering on small objects, select a high object size. • While monitoring an area where ...

AXIS P3365-V Fixed Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, forexample video analytics and intelligent video capabilities such as recognition, tracking, detection and co...

AXIS P3365-V Fixed Dome Network Camera Events Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the productcan start a recording or send an email notification when motion is detected. The set of conditions that defines how and...

AXIS P3365-V Fixed Dome Network Camera Events 2. Enter a descriptive name. 3. Select a recipient Type . 4. Enter the information needed for the recipient type. 5. Click Test to test the connection to the recipient. 6. Click OK . Set Up Email Recipients Email recipients can be configured by selecting...

AXIS P3365-V Fixed Dome Network Camera Recordings Recordings The Axis product can be configured to record video continuously or according to an action rule: • To start a continuous recording, see page 40 . • To set up action rules, see page 37 . • To access recordings, see Recording List on page 40 ...

AXIS P3365-V Fixed Dome Network Camera Recordings 5. Click Save to save and start the recording. 41

AXIS P3365-V Fixed Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selectedlanguage. To switch languages, go to Setup > Languages and first upload the new language file. Browse and lo...

AXIS P3365-V Fixed Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be configured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to ...

AXIS P3365-V Fixed Dome Network Camera System Options 2. Select an HTTPS certificate from the list of installed certificates. 3. Optionally, click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable th...

AXIS P3365-V Fixed Dome Network Camera System Options A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained. To install a self-signed certificate: ...

AXIS P3365-V Fixed Dome Network Camera System Options Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one versionmust always be enabled. IPv4 Address Configuration By default, the Axis product is set to ...

AXIS P3365-V Fixed Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then rest...

AXIS P3365-V Fixed Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host na...

AXIS P3365-V Fixed Dome Network Camera System Options Note • For NAT traversal to work, this must be supported by the router. The router must also support UPnP TM . • In this context, router refers to any network routing device such as a NAT router, Network router, Internet Gateway, Broadband router...

AXIS P3365-V Fixed Dome Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is thegroup of devices and management station running SNMP. Community names are used to identify groups. AXIS Video MIB (Management ...

AXIS P3365-V Fixed Dome Network Camera System Options Bonjour The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operatingsystems and clients that support this protocol. Bonjour can be disabled under System Options > Network &...

AXIS P3365-V Fixed Dome Network Camera System Options To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools . To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings , select Remove r...

AXIS P3365-V Fixed Dome Network Camera System Options Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also Troubleshooting on page 55 . System Overview To...

AXIS P3365-V Fixed Dome Network Camera System Options File Upload Files, for example webpages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, goto System Options > Advanced > File Upload . Uploaded files are accessed through http://<ip address&...

AXIS P3365-V Fixed Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problemshould be to check the current firmware version. The latest version may contain...

AXIS P3365-V Fixed Dome Network Camera Troubleshooting Emergency Recovery Procedure If power or network connection is lost during the upgrade, the process fails and the product becomes unresponsive. Flashing red Statusindicator indicates a failed upgrade. To recover the product, follow the steps bel...

AXIS P3365-V Fixed Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if otherread or write problems occur. To identify the source of the problem, check the System...

AXIS P3365-V Fixed Dome Network Camera Technical Specifications Function/group Item Specifications Approvals EN 55022 Class B, EN 55024, EN 61000-6-1, EN 61000-6-2, EN 50581FCC Part 15 Subpart B Class A (with unshielded cable (UTP)), Class B (with shieldedcable (STP))ICES-003 Class BVCCI Class BC-ti...

AXIS P3365-V Fixed Dome Network Camera Technical Specifications 3.3 V max 50 mA 1 2 3 4 Audio Connector 3.5 mm audio connectors(stereo) 1 2 3 1 Tip 2 Ring 3 Sleeve Audio Input Microphone/Line in Ground Audio Output Line out (mono) Ground SD Card Slot Supports SD cards with up to 64 GB of storage. Fo...