Audio-Technica AT-LP60X-GM - User Manual

Page 3 - Important information; FCC Notice; Safety precautions; For customers in the Canada; Notes on use; Turntable body

3 Safety precautions Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product. Important information Warning: To prevent fire or shock hazard, do not expose this apparatus ...

Page 4 - Part names and functions

4 Part names and functions 1 45 RPM adapter (shown in receptacle) Adapts 7" records with large center holes to fit center spindle. 2 Platter 3 Spindle 4 Felt mat 5 Dust cover hinge holders Attachment points for dust cover hinges. 6 Tonearm 7 Tonearm rest 8 Headshell and cartridge The cartridge (...

Page 5 - Preparation for use; Installing the turntable

5 Preparation for use Installing the turntable • Mount the product on a level surface. • To avoid the effects of vibrations and acoustic pressure, do not mount the product next to such items as speakers. • The product may pick up radio static if placed next to a radio. Therefore, try to keep the pro...

Page 6 - Rotating the platter; Setting pre-amplifier selector switch; Connecting the device

6 Preparation for use Rotating the platter 1. Using your hands, rotate the platter ten times. • Remove the tie that locks the tonearm and press the tonearm lift button to lift the tonearm. Slowly rotate the turntable ten times by hand in the direction of the arrow. • You may want to hold the tonearm...

Page 7 - Playing a record; Before playing a record; Automatic operation; Manual operation

7 Playing a record Before playing a record 1. Remove the cartridge’s protector. • Pull the protector straight forward to remove it. • Applying a downward force may cause the stylus to come off the body. Only low volume is output if the stylus has come off, or is about to come off, so refer to “Repla...

Page 8 - Pausing the record; Care

8 Playing a record Pausing the record 1. After lowering the volume of the amplifier, speakers, etc. sufficiently, press the tonearm lift button to lift the tonearm. Stopping the record Once the record has played to the end, the tonearm will automatically return to the tonearm rest. To manually stop ...

Page 9 - Replacing the stylus; Removing the stylus; Replacing the belt

9 Replacing the stylus Removing the stylus • In addition to the deterioration of sound quality, records may also be damaged as the cartridge’s stylus tip wears down. • As a rule of thumb, replace the stylus after 400 hours of use. • Be sure to disconnect the product’s AC adapter from the outlet. • W...

Page 11 - Troubleshooting; Dimensions

11 Troubleshooting Problem Solution The platter does not spin. • Is the AC adapter connected to the outlet? Connect the AC adapter to the outlet. • Has the belt slipped from the platter? Correctly place the belt on the platter. • Is the belt placed on the motor pulley? Check that the belt is placed ...

Page 12 - Specifications

Specifications Type Belt-drive, fully automatic operation Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM Turntable platter Aluminum Wow and flutter < 0.25% (WTD) at 3 kHz Signal-to-noise ratio > 50 dB (DIN-B) Cartridge Type VM Outputs levels“PHONO” “LINE” 2.5 mV nominal at 1 kHz, 5 cm/sec...

Audio-Technica AT-LP60X-GM - User Manual

Table of Contents:

Summary

Other Audio-Technica Players Models