Artusi CAID646B - User Manual

8 competent person to instruct them in its use. The instructor should be satisfied that they can use the appliance without danger to themselves or their surroundings.  Do not repair or replace any part of the appliance unless specifically recommended in the manual. All other servicing should be don...

9 2. Product Introduction 2.1 Top View 2.2 Control Panel 2.3 Working Theory Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by electromagnetic vibrations generating heat directly in the pan, rather than indirectly through heating the glass surface. The g...

10 2.4 Before using your New Induction Hob Read this guide, taking special note of the ‘Safety Warnings’ section. Remove any protective film that may still be on your Induction hob. 2.5 Technical Specification Cooking Hob CAID646B Cooking Zones 4 Zones Supply Voltage 220-240V~ or 380-415V~, 50Hz or ...

11 Do not use cookware with jagged edges or a curved base. Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking zone. Use pans whose diameter is as large as the graphic of the zone selected. Using a pot a slightly wider energy will be used a...

12 Select a heat setting by touching the “-” or “+” control. • If you don’t choose a heat setting within 1 minute, the Induction hob will automatically switch off. You will need to start again at step 1. • You can modify the heat setting at any time during cooking. If the display flashes alternately...

13  The function can work in any cooking zone.  The cooking zone returns to its original setting after 5 minutes.  If the original heat setting equals 0, it will return to 9 after 5 minutes. 3.3.4 Locking the Controls  You can lock the controls to prevent unintended use (for example children acc...

14 a) Using the Timer as a Minute Minder If you are not selecting any cooking zone Make sure the cooktop is turned on. Note: you can use the minute minder at least one zone shall be active. Touch the controls of the timer. The minder indicator will start flashing and “10” will show in the timer disp...

16 People with a heart pace maker should consult with their doctor before using this unit. 4. Cooking Guidelines Take care when frying as the oil and fat heat up very quickly, particularly if you’re using PowerBoost. At extremely high temperatures oil and fat will ignite spontaneously and this prese...

17 4.2 Detection of Small Articles When an unsuitable size or non-magnetic pan (e.g. aluminium), or some other small item (e.g. knife, fork, key) has been left on the hob, the hob automatically go on to standby in 1 minute. The fan will keep cooking down the induction hob for a further 1 minute. 5. ...

18 Boilovers, melts, and hot sugary spills on the glass Remove these immediately with a fish slice, palette knife or razor blade scraper suitable for Induction glass cooktops, but beware of hot cooking zone surfaces: 1. Switch the power to the cooktop off at the wall. 2. Hold the blade or utensil at...

19 The induction hob makes a low humming noise when used on a high heat setting. This is caused by the technology of induction cooking. This is normal, but the noise should quieten down or disappear completely when you decrease the heat setting. Fan noise coming from the induction hob. A cooling fan...

21 Push “ON/OFF” button to restart unit. Heating zones of the same side ( Such as the first and the second zone ) would display “u” . The power board and the display board connected failure; Check the connection. The display board of communicate part is damaged. Replace the display board. The Main b...

22 Note: The safety distance between the hotplate and the cupboard above the hotplate should be at least 760 mm. WARNING: Ensuring Adequate Ventilation Make sure the induction cooker hob is well ventilated and that air inlet and outlet are not blocked. In order to avoid accidental touch with the ove...

23 9.2 Before installing the hob, make sure that  The work surface is square and level, and no structural members interfere with space requirements.  The work surface is made of a heat-resistant and insulated material.  If the hob is installed above an oven, the oven has a built-in cooling fan. ...

24 Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after installation (see picture) . 9.6 Cautions 1. The induction hotplate must be installed by qualified personnel or technicians. We have professionals at your service. Please never conduct the operation by...