APC SUA1500US - Manual
APC SUA1500US – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Introduction; NSTALLATION; Unpacking
- Page 4 – Positioning the UPS; Place the UPS where it will be used.; The UPS is heavy. Select a location sturdy enough to handle; Mounting the UPS in a Rack; Step 1
- Page 5 – Connecting Equipment and Power to the UPS; 20V Model Only: Site wiring fault indicator
- Page 6 – Do not connect a laser printer to the UPS. A laser; Do not; Serial Port; Use only interface kits supplied or approved by APC.
- Page 7 – PERATION; The online
- Page 8 – Replace Battery; replace battery; On Battery Operation
- Page 11 – Storage; Be careful during the following steps-the battery module is heavy.; Refer to; Disconnecting the Battery for Transport; The battery may remain in the UPS it does not have to be removed.; Shut down and disconnect any equipment attached to the UPS.
- Page 12 – ROUBLESHOOTING
- Page 13 – Specifications
- Page 14 – UPS; Utility Voltage
- Page 15 – Service; Review the problems discussed in the; Mark the RMA# on the outside of the package.; Contacting APC; Refer to the APC web site,
- Page 16 – Regulatory Agency Approvals and Radio Frequency Warnings; BSMI
User Manual
English
APC Smart-UPS
®
750/1000/1500 VA
100/120/230 Vac
2U Rack-Mount
Uninterruptible Power Supply
990-1194D 03/2012
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Introduction The APC Uninterruptible Power Supply (UPS) is designed to prevent blackouts, brownouts, sags, and surges from reaching your computer and other valuable electronic equipment. The UPS filters small utility line fluctuations and isolates your equipment from large disturbances by internally...
Positioning the UPS Place the UPS where it will be used. The UPS is heavy. Select a location sturdy enough to handle the weight. Do not operate the UPS where there is excessive dust or the temperature and humidity are outside the specified limits. P LACEMENT 0º- 40ºC (32º-104ºF) 0-95% Relative Humid...
Installing and Connecting the Battery and Attaching the Front Bezel Step 1 Step 2 Step 3 Step 4 Connect battery plug to UPS. Tuck white battery cord into space above connector. Connecting Equipment and Power to the UPS S MART -UPS R EAR P ANEL 100/120V Models 120V Model Only: Site wiring fault indic...
