AMX FG148-04 - Manual

Quick Start Guide

Mio Modero

®

R-4 Remote

Overview

The Mio Modero

®

R-4 remote (

FG148-04

) provides custom control features,

including a full-color touchscreen, contained in an elegant handheld
rechargeable device. The R-4 communicates with a NetLinx master via a
wireless ZigBee

®

network. Use TPDesign4 (TPD4) to program this device. The

R-4 uses a mini-USB port for transferring programming files.

Note

: The R-4 requires the latest versions of the TPDesign4 application, and the

AMX USB LAN driver (available for download from www.amx.com):

• TPDesign4 - v2.7 (build 545 or higher)

•

AMX USB LAN - v2.01.05 (or higher)

Touch And Tilt Sensor

The Mio R-4 wakes up upon touching either the chrome side rails or pressing a
button. If the remote times out when holding it, you can reawaken the device by
tilting it. Errant jostling, such as a bumped table, will not wake the device unless
you are holding it.

Specifications

Inserting the Lithium-Ion Battery Into The Mio R-4

To install your Lithium-Ion battery into the Mio R-4:
1.

Flip and turn the Mio R-4 so that the buttons are facing away from you and
the device is upside down.

2.

Holding the device in both hands, place your thumbs on the battery door
and slide the battery door free.

3.

Connect the terminal end of the Lithium-Ion battery to the port shown in
FIG. 2. It may be necessary to use a thin, blunt non-conductive object to
seat the battery connector fully within its port. (

Note:

Make sure that the

battery wires run alongside the battery in the compartment as shown in
FIG. 2. Otherwise, the wires may be damaged or the battery door may not
close properly.)

4.

Replace the battery door, and slide it to lock it in place.

Installing a Supported Language Keypad

1.

Remove the battery door (See

Inserting the Lithium-Ion Battery Into the

Mio R-4

) and remove the battery.

2.

Unscrew the 6 screw points.

3.

Turn the unit over so the buttons are facing you.

4.

Lift the top assembly away from the PCB.

5.

If necessary, push out the standard buttons from the front of the top assem-
bly.

6.

Drop in your language pad and verify the alignment with the guide posts on
the PCB.

7.

Place the top assembly back down on the PCB and return the unit over,
exposing the 6 screw points.

8.

Tighten the 6 screw points.

9.

Reinstall the battery, replace the battery door, and slide the door to lock it in
place.

Using the Programming Jack on the Mio R-4

The programming jack located on the back of the Mio R-4 (FIG. 2) is used for
communication between the device and TPDesign4. The programming jack
uses a CC-USB Programming cable, USB to mini USB (

FG10-5965

). You can

order the programming cable from AMX if you do not have one. While loading
your configuration file, make sure the device is situated in the charging cradle.
1.

From the

System Settings

page of the Protected Settings Menu (see

Protected Settings

), set the Master Connection to

USB

.

FIG. 1

Mio Modero R-4 Remote

Mio R-4 (FG148-04) Specifications

Battery

Rechargeable Lithium-Ion

Transmission
Frequencies

• ZigBee RF wireless network

Transmission
Range

• 100 feet (30.48m).

Memory

• 32 Mbytes of FLASH
• 64 Mbytes of SDRAM

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

Numeral Keypad

19

Touch Screen

20

1

- Power

2

- Guide

3

- Exit

4

- Menu

5

- Information

6

- Move Up

7

- Move Down

8

- Move Left

9

- Move Right

10

- Select

11

- Volume Up

12

- Volume Down

13

- Channel Up

14

- Channel Down

15

- Last Viewed

16

- Mute

17

- Input

18

- Enter

19

- Back/Home

20

- Up/Down Touch Screen Navigation

Mio R-4 (FG148-04) Specifications (Cont.)

Top Components

• LED - blue backlit buttons indicate device is awake
• LCD - high resolution (240x320) 76800 pixels with

backlight and touch overlay

• Pushbuttons - the power button is red backlit; the rest

are blue backlit buttons. 29 buttons total

Rear Components

• Programming Port
• Battery Door
• Rechargeable Battery Connection

Dimensions (HWD)

9.50 x 2.00 x .74 (241.3 mm x 50.8 mm x 18.80 mm)

Supported
Languages:

• English
• Spanish
• French
• Italian
• German

• Portuguese
• Arabic
• Russian
• Greek
• Simplified Chinese

• Japanese
• Thai
• Hindi
• Korean

Certifications:

• FCC
• CE
• IEC-60950

Weight

• .45 lbs (20 g) without batteries
• .55 lbs (25 g) with batteries

Operating
Environment

• Operating Temperature: 0° to 40° C (32° to 104° F)
• Storage Temperature: -20° to 70° C (-4° to 158° F)

Included Items

• Mio-RBP Rechargeable Lithium-ion Battery (

FG147-10

)

Optional Keypads:

• MIO-R4-KP-ITALIAN (

FG148-141

)

• MIO-R4-KP-FRENCH (

FG148-142

)

• MIO-R4-KP-ARABIC (

FG148-143

)

• MIO-R4-KP-CHINESE (

FG148-144

)

Other AMX
Equipment

• CC-USB Programming cable (

FG10-5965

)

• Mio-RCC Charging Base (

FG147-02

) with power supply

• NXR-ZGW (

FG5791-01

)

• NXR-ZRP (

FG5791-02

)