AMX Mio Attach - Manuals - manualsarea.com

Page 2 - AMX Limited Warranty and Disclaimer

AMX Limited Warranty and Disclaimer AMX Corporation warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX Corporation, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted fo...

Page 3 - Software License and Warranty Agreement

Software License and Warranty Agreement LICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software is licensed, not sold. This license does not grant Licensee the right to create derivative works of the AMX Software...

Page 5 - Table of Contents

Table of Contents i Mio Attaché Remote Keypad Device Table of Contents Overview ............................................................................................................ 1 Mio Attaché ....................................................................................................

Page 7 - Overview; Mio Attaché

Overview 1 Mio Attaché Remote Keypad Device Overview Mio Attaché The Mio Attaché ( FG5799-01 )is a remote keypad device that enables control without the tether of wires; it uses both 38 and 455 KHz AMX IR frequencies. The Attaché also has an LCD fixed menu system that doubles as a button. FIG. 1 The...

Page 9 - The Mio Attaché Wake Up State

Overview 3 Mio Attaché Remote Keypad Device The Mio Attaché Wake Up State The Mio Attaché offers a programmable sleep mode to conserve battery life when the unit is not in use. The Mio Attaché wakes upon the user's touch of the metal ring that trims the unit and illuminates the buttons. The buttons ...

Page 11 - Installation; Installing The Battery; Charging The Attaché with the Provided Power Supply

Installation 5 Mio Attaché Remote Keypad Device Installation Installing The Battery The Mio Attaché is equipped with a lithium-ion rechargable battery. The battery is charged from a PS4.4 power supply through either a DC power jack located under the kickstand or through the optional Docking Station....

Page 12 - Charging The Attaché with the Docking Station; Low Battery Indicator

Installation 6 Mio Attaché Remote Keypad Device Charging The Attaché with the Docking Station The Mio Attaché can also receive power for charging from an optional Docking Station. When the battery is charging from complete depletion, the battery does a trickle charge where it starts gradually and ra...

Page 13 - Changing Buttons

Installation 7 Mio Attaché Remote Keypad Device Changing Buttons The Mio Attaché is shipped with "installation" buttons; they are intended to be place holders until your engraved buttons, designed with KeypadBuilder, arrive. To switch out "installation" buttons: 1. Pry the button usi...

Page 15 - Programming The Attaché; Using Connector Ports on The Attaché

Programming The Attaché 9 Mio Attaché Remote Keypad Device Programming The Attaché KeypadBuilder Most functionality of the Mio Attaché is handled using the application, KeypadBuilder . Go to www.amx.com for the KeypadBuilder Instruction Manual . Using Connector Ports on The Attaché The programming j...

Page 16 - Setting The IR Frequency; Persistent Serial Commands

Programming The Attaché 10 Mio Attaché Remote Keypad Device Setting The IR Frequency The Mio Attaché is set to the IR frequency 38KHz by default. Use the IRMODE Serial Command to change the frequency to 455KHz. To set the frequency to 455KHz: 1. Establish a HyperTerminal session with your device. 2....

Page 18 - Sending Firmware to The Mio Attaché

Programming The Attaché 12 Mio Attaché Remote Keypad Device Sending Firmware to The Mio Attaché You need NetLinx studio to update firmware located on the Mio Attaché. To send firmware to the device: 1. Open NetLinx Studio. 2. Go to Tools > Firmware Transfers > Send to Axcess Device... This ope...