AMX ENC4 - Manual
AMX ENC4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Installation Guide
RDA-ENC2/ENC4/ENC6
Overview
The AMX Lighting™ RDA-ENC2 (
FG606-10
), RDA-ENC4 (
FG606-11
), and
RDA-ENC6 (
FG606-12
) enclosures provide secure mounting for all Radia
controllers/modules. The enclosures are CE, UL, and C-UL approved.
Installation Instructions
• For indoor use only.
• Mount on vertical surface only.
• Maintain 12" (304.88 mm) minimum clearance above and below the enclo-
sure.
• Route class 1 conductors through upper conduit knockouts.
• Route class 2 conductors through lower conduit knockouts.
• Use 75°C (167°F) copper conductors only.
• Install filler plate #28-10500 (RDA-EFP) in all unused openings.
• Install only UL approved modules (see the UL Number Cross Reference to
Enclosure Weights
• RDA-ENC2: 4.5 lb. (2.04 kg)
• RDA-ENC4: 7.5 lb. (3.40 kg)
• RDA-ENC6: 9.5 lb. (4.31 kg)
Radia enclosures must be mounted on a vertical surface with a minimum of 12"
(304.8 mm) clearance above and below the enclosure.
Dimensions between center lines (from FIG. 2):
RDA-ENC2:
• A to B = 5.25" (133.4 mm)
• B to C = 11.0" (279.4 mm)
RDA-ENC4:
• A to B = 10.0" (254.0 mm)
• B to C = 11.0" (279.4 mm)
RDA-ENC6:
• A to B = 16.0" (406.4 mm)
• B to C = 11.0" (279.4 mm)
FIG. 1
Top, front, bottom, and side views of the RDA enclosures
RDA-ENC2
RDA-ENC4
RDA-ENC6
Side View
(for all enclosures)
12.0"
(304.8 mm)
6.0" (152.4 mm)
0.75" (19.05 mm)
12.0"
(304.8 mm)
6.0"
(152.4 mm)
18.0"
(457.2 mm)
FIG. 2
Bracket configuration
A to B
B to C
Bottom slot
Top slot
Configuration for
right and left
mounting brackets
for all Radia
enclosures.
Maximum mounting
screw size: #12
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
