Page 2 - AMX Limited Warranty and Disclaimer
AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, excep...
Page 3 - Software License and Warranty Agreement
Software License and Warranty Agreement LICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software is licensed, not sold. This license does not grant Licensee the right to create derivative works of the AMX Software...
Page 5 - Table of Contents
Table of Contents i Mio Modero Device Family Table of Contents Overview ............................................................................................................ 1 Specifications .........................................................................................................
Page 7 - Overview; Mio Modero Device Family
Overview 1 Mio Modero Device Family Overview The Mio Modero device family provides a wide range of control capabilities in the form of keypads that are as adept as they are elegant. Each device is available as single style (8 button max) or double style (16 button max) with an optional LCD capped bu...
Page 8 - Specifications
Overview 2 Mio Modero Device Family Specifications The Mio Modero device family keypad specifications are as follows: Specifications Power: 12 vDC, 70 - 230 mA (range depending on device type and number of buttons) Front Panel Components: • LCD (where applicable) - SPI controlled 96 x 96 pixel resol...
Page 9 - Available Color Schemes; Additionally, the LCD has a button cap enabling it to act as a button.; Fixed Menu System; KeypadBuilder Instruction Manual
Overview 3 Mio Modero Device Family Available Color Schemes The Mio Modero device family is available in a range of colors, and the Elite supports a variety of Lutron color schemes. Mio Modero LCD Feature The Mio Modero Elite is available with an optional LCD screen. The LCD is a scalable black-and-...
Page 11 - Installation
Installation 5 Mio Modero Device Family Installation The basic front and rear components of the Mio Modero are as follows: Before touching the device, discharge the static electricity from your body by touching a grounded metal object. FIG. 2 Mio Modero Front and Rear Components AxLink3.5 mini Phoen...
Page 12 - Changing Buttons; Snap the faceplate on the mounting frame.
Installation 6 Mio Modero Device Family Changing Buttons The Mio Modero Classic and Elite are shipped with "installation" buttons; they are intended to be place holders until your engraved buttons, designed with KeypadBuilder, arrive. To switch out "installation" buttons: 1. Pry the ...
Page 13 - To change custom buttons:; Mio Modero Prestige
Installation 7 Mio Modero Device Family To change custom buttons: 1. If connected, disconnect the power supply. 2. If connected to mounting frame, place a flathead screwdriver in the notch at the bottom right of the Mio Modero, and pry the faceplate from the mounting frame. 3. On the back of the fac...
Page 14 - Setting The AxLink Device Number; If connected, disconnect the power supply.; Wiring; Preparing captive wires; Do not connect power to the Mio Modero until the wiring is complete.
Installation 8 Mio Modero Device Family Setting The AxLink Device Number 1. If connected, disconnect the power supply. 2. Locate the 8-position Device DIP switch on the rear panel.(FIG. 5). 3. Set the DIP switch according to the switch values shown below. The device number is set by the total value ...
Page 15 - Wiring guidelines; Wiring Guidelines at 170 mA
Installation 9 Mio Modero Device Family Wiring guidelines The Mio Modero requires 12 VDC power to operate properly. The necessary power is supplied via the AxLink cable. The maximum AxLink wiring distance is determined by power consumption, supplied voltage, and the wire gauge used for the cable. Th...
Page 16 - Using AxLink for data with an auxiliary power supply
Installation 10 Mio Modero Device Family Using AxLink for data with an auxiliary power supply Connect the controller’s AxLink connector to the AxLink connector on the rear panel of the Mio Modero device, as shown in FIG. 7. Use an auxiliary 12 VDC power supply when the distance between the controlle...
Page 17 - Mounting Procedures
Installation 11 Mio Modero Device Family Mounting Procedures FIG. 8 shows the wallbox mounting dimensions for the single and double style Mio Modero. AMX recommends mounting the Mio Modero in a standard one-gang wallbox, a conduit box per NEC specs section 370, with a minimum internal clearance of 2...
Page 18 - Wallbox Mounting
Installation 12 Mio Modero Device Family Wallbox Mounting 1. Use the cutout dimension for the wallbox to cutout the install surface for the Mio Modero. 2. Confirm that the terminal end of the AxLink cable is disconnected, and not receiving power. 3. If the faceplate is connected to the mounting fram...
Page 19 - Podium Mounting
Installation 13 Mio Modero Device Family Podium Mounting 1. Use the cutout dimension shown in either FIG. 8 or FIG. 9 to cutout the mounting frame install surface for the Mio Modero. 2. Confirm that the terminal end of the AxLink cable is disconnected, and not receiving power. 3. If the faceplate is...
Page 20 - Accent Frame; To install the Mio Modero with the optional accent frame:
Installation 14 Mio Modero Device Family Accent Frame While the Mio Modero device family does fit into many International wallboxes, it may be necessary to utilize the optional accent frame to completely cover the wallbox. To install the Mio Modero with the optional accent frame: 1. Use the cutout d...
Page 21 - Mio Modero IR; The Mio Modero IR (FIG. 11) is a remote IR receiver for use with NetLinx; Mio Modero IR Specifications
Mio Modero IR 15 Mio Modero Device Family Mio Modero IR The Mio Modero IR (FIG. 11) is a remote IR receiver for use with NetLinx ® Central Controllers and operates via the AxLink bus to remotely control devices. The Mio Modero IR is in a wall panel that fits into the US-style single-gang enclosure a...
Page 22 - Wiring and Installation; Setting the AxLink Device Number
Mio Modero IR 16 Mio Modero Device Family Wiring and Installation Set the receive AxLink device number before installing the Mio Modero IR. FIG. 12 illustrates the location of key components on the Mio Modero IR circuit board. Setting the AxLink Device Number 1. If connected, disconnect the power su...
Page 23 - Wiring Guidelines; For wire prepartaion guidelines, refer to; Checking AxLink Status; Wiring Specifications @ 35 mA
Mio Modero IR 17 Mio Modero Device Family Wiring Guidelines The Mio Modero IR requires 12 VDC power to operate properly. The power is supplied by the AMX system's AxLink cable. The maximum wiring distance between the Central Controller and the receiver is determined by power consumption, supplied vo...
Page 24 - Mounting Procedure
Mio Modero IR 18 Mio Modero Device Family Mounting Procedure FIG. 15 shows the wallbox mounting dimensions for the Mio Modero IR. AMX recommends mounting the Mio Modero IR in a standard one-gang wallbox, a conduit box per NEC specs section 370, with a minimum internal clearance of 2-5/8" x 1-3/4...
Page 27 - Programming The Mio Modero; KeypadBuilder; Recognized SEND_COMMANDs; All text is based on a Unicode index.
Programming The Mio Modero 21 Mio Modero Device Family Programming The Mio Modero KeypadBuilder Most functionality of the Mio Modero is handled using the application, KeypadBuilder . Go to www.amx.com for the KeypadBuilder Instruction Manual . There are a select number of SEND_COMMANDs the Mio Moder...
Page 32 - Sending Firmware to The Mio Modero Keypads; Send to Axcess; Query for Devices; Devices; Send
Programming The Mio Modero 26 Mio Modero Device Family Sending Firmware to The Mio Modero Keypads You need NetLinx studio to update firmware located on the Mio Modero Keypads. To send firmware to the keypads: 1. Open NetLinx Studio. 2. Go to Tools > Firmware Transfers > Send to Axcess Device.....
