Page 2 - AMX Limited Warranty and Disclaimer; Warranty Repair Policy; Copyright Information
AMX Limited Warranty and Disclaimer All products returned to AMX require a Return Material Authorization (RMA) number. The RMA number is obtained from the AMX RMA Department. The RMA number must be clearly marked on the outside of each box. The RMA is valid for a 30-day period. After the 30-day peri...
Page 3 - Table of Contents
Table of Contents i DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers Table of Contents DAS-SIRIUS Tuner Module .................................................................................. 1 Overview ...................................................................................
Page 5 - DAS-SIRIUS Tuner Module; Overview; Each Tuner Module uses 1 source input on the Audio Controller.; Installation
DAS-SIRIUS Tuner Module 1 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers DAS-SIRIUS Tuner Module Overview Add Sirius satellite radio functionality to your AMX Distributed Audio system with the DAS-SIRIUS Satellite Radio Tuner Module ( FG1110-02 ). The DAS-SIRIUS Tuner Module can be ...
Page 6 - Setting the Jumpers
DAS-SIRIUS Tuner Module 2 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers FIG. 2 provides orientation for the various internal components that must be accessed to install the Tuner Module and set the Jumpers. Setting the Jumpers While Mi-Series and Tango Audio Controllers support 2 T...
Page 7 - Audio Controller Jumpers - Location
DAS-SIRIUS Tuner Module 3 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers Audio Controller Jumpers - Location Examine the configuration of the jumpers on the left-side Rear-Board Pin Bus, as seen when viewing the rear board from the front of the Controller (FIG. 3). Audio Controller ...
Page 8 - Audio Controller Jumpers - Dual Tuner Setting
DAS-SIRIUS Tuner Module 4 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers Audio Controller Jumpers - Dual Tuner Setting With the DAS-AMFM Tuner Module installed in position 1, and the DAS-SIRIUS Tuner Module installed in position 2, the Audio Controller jumpers should all be set to O...
Page 9 - Tuner 1 Jumper Settings; Installing the DAS-SIRIUS Tuner Module; Tuner 1; Tuner Module, is typically installed in position #2 (labeled; Remove the cover from the Audio Controller.; Tuner Option; slot for the Tuner Module.
DAS-SIRIUS Tuner Module 5 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers Tuner 1 Jumper Settings The Tuner Module installed in position 1 must be set to Tuner 1, as shown in FIG. 7: Tuner 2 Jumper Settings The Tuner Module installed in position 2 must be set to Tuner 2, as shown in ...
Page 10 - The; Tuner 2; Removing Tuner Modules
DAS-SIRIUS Tuner Module 6 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers The Rear Panel connector at the end of the Tuner Ribbon Cable is connected to the Controller’s rear board pin-bus (see FIG. 2). Keep the Tuner Ribbon Cable oriented so that the red stripe is always on top, as i...
Page 12 - Connecting and Positioning the SIRIUS Antenna; Verify the Signal strength; Activating Your SIRIUS Subscription
DAS-SIRIUS Tuner Module 8 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers Connecting and Positioning the SIRIUS Antenna 1. Connect the provided SIRIUS Antenna to the DAS-SIRIUS (see FIG. 1). 2. Verify the Signal strength a. Access the programming menus via the front of the Controller...
Page 13 - Mi Series – SIRIUS Setup screen; Accessing the SIRIUS Setup Screen; SELECT; Setup; System Setup Mode; SIRIUS
Mi Series – SIRIUS Setup screen 9 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers Mi Series – SIRIUS Setup screen Accessing the SIRIUS Setup Screen 1. To access the SIRIUS menus on the Controller, press the SELECT button on the front of the Controller. The following screen will be di...
Page 14 - SIRIUS Setup; When; CAT; Category; CH; Channel
Mi Series – SIRIUS Setup screen 10 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers SIRIUS Setup 1. When SIRIUS is selected, the SIRIUS Setup screen is displayed (FIG. 17): The options on this page are described in the following sub-sections: SIRIUS Setup - CAT Selecting CAT ( Categor...
Page 15 - SIRIUS Setup - Status; Selecting; STATUS
Mi Series – SIRIUS Setup screen 11 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers Presets can be set via this screen if the installer chooses. There are 10 available preset positions. Presets can also be set at the keypad. SIRIUS Setup - ID Selecting ID displays the SIRIUS ID (FIG. ...
Page 17 - Controlling SIRIUS via the LCD Keypad
Controlling SIRIUS via the LCD Keypad 13 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers Controlling SIRIUS via the LCD Keypad Overview The LCD keypad is a full touch screen keypad with two tactile buttons that are used for Volume UP/DOWN. There are 3 LCD screens for the SIRIUS Sourc...
Page 18 - Selecting SIRIUS as the Audio Source; On the; Source 1; icon appears in front of the text to indicate that SIRIUS is ON; SIRIUS SAT Main screen
Controlling SIRIUS via the LCD Keypad 14 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers Selecting SIRIUS as the Audio Source On the Home screen, SIRIUS will appear in the top left touch field and is considered to be Source 1 (FIG. 23). To turn ON the SIRIUS source, touch the text “S...
Page 19 - Channel –; SIRIUS Preset screen; Preset; SIRIUS SAT Main
Controlling SIRIUS via the LCD Keypad 15 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers Display Line #1 Channel # & Channel Name Channel # + Channel Name will be displayed up to a max. of 14 characters. This display line scrolls once and stops. Touch the line of text to update t...
Page 20 - SIRIUS NUMERIC screen; NUMERIC
Controlling SIRIUS via the LCD Keypad 16 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers SIRIUS NUMERIC screen Touching NUMERIC on the SIRIUS SAT Main screen (FIG. 24 on page 14) displays the standard Numeric screen where the user can directly key in the Channel of their choice (FIG....
Page 21 - CH LIST
Controlling SIRIUS via the LCD Keypad 17 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers SIRIUS MORE>> screen Touch MORE on the SIRIUS SAT Main screen (FIG. 24 on page 14) to display the SIRIUS MORE screen (FIG. 27). The options on this screen allow the user to perform the foll...
Page 23 - SIRIUS More; PRESET; Numeric; ENTER
Controlling SIRIUS via the LCD Keypad 19 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers SIRIUS - Presets Users can set up to 10 presets per source. 1. From the SIRIUS More screen (FIG. 27 on page 17), touch PRESET , to access the Numeric screen (FIG. 30). 2. Use the numeric buttons ...
Page 24 - From the; Favorites; SET FAV; Key in the channel to be set as the favorite, and select
Controlling SIRIUS via the LCD Keypad 20 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers SIRIUS - Favorites Favorites is a standard functionality of the Matrix Controller and is available for all sources. One minute after an “ALL OFF” has been performed, or 10 Minutes after every zon...
Page 25 - SIRIUS – Tactile Keypad; FIG. 32 shows the navigation button layout for Tactile Keypads.; SIRIUS Source Control; When the Source type =
SIRIUS – Tactile Keypad 21 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers SIRIUS – Tactile Keypad FIG. 32 shows the navigation button layout for Tactile Keypads. SIRIUS Source Control When the Source type = SIRIUS , the navigation buttons perform the following functions: FIG. 32 Tac...
Page 27 - SIRIUS Messages; Initializing SIRIUS; SIRIUS ID Display
SIRIUS Messages 23 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers SIRIUS Messages Overview Messages specific to the DAS-SIRIUS tuner module that can be displayed on the Controller or LCD Keypad include: When first powering ON the Controller, and the user selects the SIRIUS source, t...
