AMX AXB-232++ - Manual

AMX AXB-232++

AMX AXB-232++ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 3 – Table of Contents
  • Page 5 – Product Information; Front Panel
  • Page 6 – Specifications
  • Page 7 – Installation and Wiring; Setting the Internal Jumpers; Setting jumper JP4 to terminate RS-422 input with 100 ohms
  • Page 8 – Setting jumper JP5 to set the RS-422 port for RS-485 use; Setting the DIP Switches; Setting the DEVICE DIP switch; DEVICE; Cards
  • Page 9 – Stop bits; is achieved by setting the DIP switch to 300 baud, and using the; BAUDMED; BAUDHIGH; section on page 9 for
  • Page 10 – Preparing captive wires; Wiring Guidelines at 160 mA
  • Page 11 – Using Hardware Handshaking
  • Page 12 – Replacing the Lithium Batteries
  • Page 13 – Programming
  • Page 15 – Axcess program characteristics
  • Page 16 – Send_String Escape Sequences
  • Page 18 – Xmodem Timing Commands; XX; AXlink Master Statements; channel
  • Page 19 – Reserved Channels; PROGRAM; MC; port is not practical (for example, in installations where the
Loading the manual

i n s t r u c t i o n m a n u a l

A X l i n k B u s C o n t r o l l e r s

AXB-232++

RS-232/422/485 Interface

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Table of Contents

Table of Contents i AXB-232++ RS-232/422/485 Interface Table of Contents Product Information ................................................................................................. 1 Front Panel ..................................................................................................

Page 5 - Product Information; Front Panel

Product Information 1 AXB-232++ RS-232/422/485 Interface Product Information The AXB-232++ RS-232/422/485 Interface is an AXlink bus controller that provides remote control for devices that require a variety of control protocols. The AXB-232++ extends RS-232, RS-422, or RS-485 control to remote sour...

Page 6 - Specifications

Product Information 2 AXB-232++ RS-232/422/485 Interface Specifications The following table lists the specifications for the AXB-232++. Specifications Power 12 VDC @ 160 mA Processor On board 32-bit processor and 384K (of non-volatile memory) run Axcess programs independent of the control system. Th...

Other AMX Models

All AMX Other