AMX AVB-DA-RGBHV-0104 - Manual

Installation Guide

Solecis

AVB-DA-RGBHV-0104

Overview

The Solecis AVB-DA-RGBHV-0104 1x4 RGBHV HD-15 Distribution Amplifier
(

FG1340-3404-01

) is a high quality wide bandwidth distribution amplifier. With a

video bandwidth in excess of 350MHz (-3dB) the AVB-DA-RGBHV-0104 is
suitable for all RGBHV, RGBS, RGsB and YUV type signals.
The terminated inputs and 75 ohm driven outputs make the
AVB-DA-RGBHV-0104 ideal for connection to long cable runs.
The AVB-DA-RGBHV-0104 is housed in a metal enclosure and is powered by
the supplied external 9V power adaptor.

Product Specifications

Safety Instructions

Please read these instructions before using your AMX Solecis device. Failure to
comply with these instructions could result in fire, electrical shock, personal injury,
death, or damage to the equipment.

Liquid Spills

Do not set drinks on top of the unit or immerse the unit in liquid.

Do Not Disassemble

This device contains no user serviceable parts. All servicing must be performed by a
qualified service technician.

For Safety Reasons

•

Do not place the unit on an unstable surface.

•

Do not use near water or sources of heat.

•

Use only recommended attachments.

•

Use the type of power supply as specified.
Unplug the power to the unit and refer servicing to qualified personnel under the
following conditions:

•

If liquid has been spilled or the unit has been exposed to rain or water.

•

If it does not operate normally when the operating instructions are followed or if it

exhibits a distinct change in performance indicating a need for service.

•

If the unit has been dropped or the cabinet damaged.

Connections

PC Source

Connect the PC source to the Input socket on the rear panel of the unit and
connect monitors, projectors etc to the Output sockets.

• The PC video input is 75 ohm terminated.
• The PC video outputs are fully 75 ohm driven for connection to long cable

runs.

Note

: It is imperative that the input source is fully compatible with the display

device.

Power

• Connect the supplied power pack to the power socket on the unit or

alternatively use an unregulated 9VDC supply.

• Connect the 9V supply to a MAINS source. The power LED on the front of

the unit will light and the input signal will be present on all 4 outputs.

FIG. 1

Solecis AVB-DA-RGBHV-0104

AVB-DA-RGBHV-0104 Specifications

RGB Input

Number:

1

Connector:

HD-15

Level:

Analog

Max Level:

1V p-p

Impedance:

75 ohm

Sync Input

Type:

Analog or TTL

Impedance:

75 ohm

RGB Video Bandwidth:

350MHz -3dB

RGB Return Loss:

-45dB@10MHz, -27dB@100MHz

RGB Output

Number:

4

Connectors:

HD-15

Level:

Analog

Gain:

Unity

Impedance:

75 ohm

Sync Output

Level:

TTL

Gain:

TTL restore

Impedance:

75 ohm

Power

Input Voltage:

9VDC

Connector:

2.1mm DC power jack for use with included external
power supply.

Power Consumption:

8W

Dimensions (HWD):

1.69” x 8.81” x 4.52” (4.3cm x 22.4cm x 11.5cm)

Weight:

3.30 lbs. (1.5kg)

Included Accessories:

9V Power supply

(rear)

(front)

AVB-DA-RGBHV-0104 Specifications (Cont.)

Certifications:

• CE
• UL
• FCC class B, part 15
• RoHS/WEEE compliant