American Standard Ravenna - Manual
American Standard Ravenna – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
K62
© 2006 American Standard Inc.
RAVENNA™
RIGHT HEIGHT™ TOILET
VITREOUS CHINA
Revised 5/05
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT
: Dimensions of fi xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
305mm
(12)
756mm
(29-3/4)
C/L OF OUTLET
83mm
(3-1/4)
FINISHED WALL
222mm
(8-3/4)
19mm ± 6mm
(3/4 ± 1/4)
419mm
(16-1/2)
C/L
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
305mm
(12)
178mm
(7)
16mm
(5/8)
FINISHED
FLOOR
787mm
(31)
241mm
(9-1/2)
152mm
(6)
476mm
(18-3/4)
222mm
(8-3/4)
SUPPLY
AS
REQ'D
381mm
(15)
*
To Be Specifi ed:
❏
Color:
❏
Seat: American Standard #5324.019 “Rise and
Shine" solid plastic, closed front, elongated seat
with cover.
❏
Seat: American Standard #5311.012 “Laurel"
molded closed front seat with cover.
❏
Alternate Seat:
❏
Supply with stop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
RAVENNA™ RIGHT HEIGHT™ TOILET
❑
2646.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Elongated siphon action jetted bowl
• 16-1/2" Rim height for accessible applications
• Fully glazed 2" trapway
• AquaForce fl ushing technology
• Styled tank w/fi tted tank cover
• Chrome trip lever
• Speed Connect™ tank /bowl coupling system
• Sanitary bar on bowl
• 2 color matched bolt caps
• 100% factory fl ush tested
• Design coordinated to Ravenna
pedestal lavatory
❑
3417.016
Bowl
❑
4096.016
Tank
Alternate Tank:
❑
4096.516
with Aquaguard tank liner
Nominal Dimensions:
756 x 476 x 787mm
(29-3/4" x 18-3/4" x 31")
Fixture only, seat and supply by others
Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
