American Standard 0476.028 - Manual
American Standard 0476.028 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
J43
BARRIER FREE
© 2008 AS America Inc.
FINISHED
WALL
OR
SPLASH BACK
441mm
(17-3/8)
518mm
(20-3/8)
175mm
(6-7/8)
71mm
(2-13/16)
203mm
(8)
OPTIONAL
C/L
FINISHED
FLOOR
1-1/4 O.D.
TAILPIECE
1-1/4 O.D.
WASTE
203mm
(8)
178mm
(7)
279mm
(11)
*
COUNTERTOP (BY OTHERS)
178mm
(7)
10mm
(3/8)
SEALING COMPOUND
SUPPLIES
AS REQ'D.
324mm
(12-3/4)
*
787mm (31)
854mm (33-5/8)
854mm
(33-5/8)
51mm
(2)
610mm
(24)
152mm
(6)
MAX.
BARRIER FREE
CLEARANCE
686mm
(27)
MIN.
203mm
(8)
MIN.
229mm
(9)
MIN.
DRAWING FOR
DIMENSIONAL
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
AQUALYN™
COUNTERTOP SINK
VITREOUS CHINA
AQUALYN™ COUNTERTOP SINK
• Made from vitreous china
• Self-rimming with cutout template supplied
• Front overflow
• Faucet ledge
Shown with 4801.862 Amarilis/Heritage faucet
with Triune cross handles (not included)
❏
0475.020
Faucet holes on 8" (203mm) centers
(illustrated)
❏
0475.920
Faucet holes on 8" (203mm) centers
• Less overflow
❏
0476.028
Faucet holes on 4" (102mm) centers
❏
0476.037
Faucet holes on 4" (102mm) centers
• Extra right-hand hole
❏
0475.035
Faucet holes on 4" (102mm) centers
• Extra left-hand hole
❏
0476.928
Faucet holes on 4" (102mm) centers
• Less overflow
❏
0475.047
Center hole only
Nominal Dimensions:
518 x 441mm
(20-3/8" x 17-3/8")
Bowl sizes:
406mm (16") wide
254mm (10") front to back
143mm (5-5/8") deep
Compliance Certifications -
Meets or Exceeds the
Following Specifications:
• ASME A112.19.2M for
Vitreous China Fixtures
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance area.
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
Revised 2/08
SEE REVERSE FOR ADDITIONAL ROUGHING-IN
DIMENSIONS
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Linen
❏
Silver
❏
Fawn Beige
❏
Black
❏
Faucet*:
❏
Faucet Finish:
❏
Supplies:
❏
1-1/4" Trap:
* See faucet section for additional models available
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
