American Standard 0321.075 - Manual
American Standard 0321.075 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
M27
© 2008 AS America Inc.
Revised 7/07
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Silver
❏
Faucet*:
❏
Faucet Finish:
❏
Supplies:
❏
1-1/4" Trap:
❏
Nipple:
❏
Concealed Arms Support (by others):
* See faucet section for additional models available
DECLYN™
WALL-HUNG LAVATORY
VITREOUS CHINA
DECLYN™ WALL-HUNG LAVATORY
• Wall-hung sink
• Vitreous china
• Rear overflow
• Soap depression
• Faucet ledge
Shown with 2000.101 Ceramix faucet
(not included)
❏
0321.026
With wall hanger (Illustrated)
Faucet holes on 102mm (4") centers
❏
0321.075
For concealed arms support
Faucet holes on 102mm (4") centers
Nominal Dimensions:
470 x 432mm
(18-1/2" x 17")
Bowl sizes:
362mm (14-1/4") wide
273mm (10-3/4") front to back
152mm (6") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-
LINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP
ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT
: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
FINISHED
WALL
102mm
(4)
FINISHED
FLOOR
1-1/4 O.D.
TAILPIECE
1-1/4 O.D.
WASTE
203mm
(8)
178mm
(7)
165mm
(6-1/2)
SUPPLIES
AS REQ'D.
197mm
(7-3/4)
470mm
(18-1/2)
57mm
(2-1/4)
114mm
(4-1/2)
178mm
(7)
432mm
(17)
483mm
(19)
267mm
(10-1/2)
114mm
(4-1/2)
70mm
(2-3/4)
38mm
(1-1/2)
76mm
(3)
89mm
(3-1/2)
343mm
(13-1/2)
235mm
(9-1/4)
11mm (7/16) DIA.
ANCHOR SCREW
HOLES
SOAP DEPRESSION
C/L
*
INTEGRAL
BRACKETS
HANGER
*
787mm (31)
864mm (34)
19mm
(3/4)
406 mm
(16)
54mm (2-1/8) DIA.
HOLES FOR
CONCEALED ARMS
BARRIER FREE
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
