Altec Lansing SLS6221 - Manual

System Specifications

Frequency Response:

32 Hz – 18 kHz (-10 dB)

Maximum Output:

101 dB SPL (1m)

System Power:

58 watts RMS @ 1% THD

Satellite Power:

7 watts RMS @ 1% THD

Subwoofer Power:

44 watts RMS @ 1% THD

System THD (Input to Amplifier Output):

<0.6% THD @ 1 kHz

Signal-to-Noise Ratio:

> 78 dB

Channel Separation:

> 55 dB

Input Impedance:

10 k ohm

Input Sensitivity:

-11.76 dBu (200 mV RMS)

Maximum Input Level:

+12 dBu (3.08 V RMS)

Volume Control:

70 dB attenuation maximum

Treble Level Control:

+/- 9 dB @ 10 kHz

Bass (Subwoofer) Level Control:

+/- 10 dB @ 100 Hz

Recommended Headphone Load Impedance:

32 ohms, each channel

Headphone Output:

7mW into 32 ohms, both channels driven

Drivers (per satellite):

Six 1” / 25 mm full-range 8 ohm micro drivers

Subwoofer Driver

:

One 6.5” / 165 mm long-throw 4 ohm woofer

Cables (Supplied with SLS6221)

• Satellite: 4-pin DIN cable (3 m / 9.8 ft.) with extension (2 m / 6.6 ft.)
• Controller: 9-pin DIN cable (3 m / 9.8 ft.)
• RCA input cable (5 m / 16.3 ft.)

AC Power Requirements:

• 120 V AC @ 60 Hz (USA, Canada and applicable Latin American and Asian countries).
• International versions with 220 V & 230 V power supplies are available.

Input Connections:

• Stereo RCA inputs Red (right) and White (left) on rear panel of subwoofer.
• One 3.5 mm stereo input on rear panel of subwoofer.
• One 3.5 mm auxiliary input is located on the wired control pod.

Controls:

• Wired Control Pod: Rotary Up/Down Volume, Bass, Treble, and On/Standby
• Infrared Wireless Remote: Up/Down Volume, Bass, Treble, and On/Standby

Enclosure Material & Finish:

• Satellites: Black injection-molded plastic with painted metal grill
• Subwoofer: Black painted 9 mm MDF with injection-molded front panel
and painted metal grill

Satellite Dimensions:

• 2.5" (W) x 1" (D) x 14.4" (H)
• 64 mm (W) x 26 mm (D) x 365 mm (H)

Subwoofer Dimensions:

• 8.5" (W) x 7.9" (D) x 16" (H)
• 216 mm (W) x 198 mm (D) x 406 mm (H)

Weight:

• Shipping: 22.5 lbs (10.2 kg)
• Net weight of satellites, subwoofer and control pod: 19 lbs (8.6 kg)

Visual communication is a powerful thing, but nothing adds to the overall impact like

high-fidelity audio. Flat panel displays (FPDs) are the video communication media of choice

for corporate, institutional, retail, and commercial clients – anyone who wants to present

high-impact, high-resolution visual information.

Unfortunately, choices for FPD audio playback have been limited to low-performance,

poor-quality speaker systems.

Until now.

Introducing the Altec Lansing SLS6221 system. The first professional-quality 2.1 powered

audio system specifically designed for use with FPDs. Now you can provide your clients

with high-fidelity, high-definition audio to match the quality of their video presentations.

© 2004 Altec Lansing Professional. All rights reserved.

1000 W. Wilshire Blvd., Suite 362, Oklahoma City, OK 73116

Tel. 405-848-3108 / Fax. 405-848-3216 / [email protected]

Visit www.altecpro.com

P

R O F E S S I O N A l

Introducing a Sound Solution

for All Flat Panel Displays

SLS6221

Proudly distributed by

in the United States www.electrograph.com 1-800-776-5768

P

R O F E S S I O N A l

RIGHT

LEFT

CONTROLLER

INPUT

R

L

AUDIO INPUT

[f

ol

d]

[f

ol

d]