Alcatel LC-2G24FP - Manual
Alcatel LC-2G24FP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – “Port and Cable Specifications”; POE LED; Status; FE POE LED; Status
- Page 3 – Power LED; Line Card Status LED; Line Card AP Status LED
- Page 4 – Inserting a Line Card
- Page 5 – “Removing a Line; Removing a Line Card
- Page 6 – If removing a line card from Slot 1, make sure that the
- Page 7 – Port and Cable Specifications; ETH Rx–
- Page 8 – Contacting Alcatel; Web Site; Main Site
Alcatel OmniAccess 6000 LC-2G24FP Installation Instructions
1
Alcatel OmniAccess 6000 LC-2G24FP
Installation Instructions
The Alcatel 6000 SPOE Line Card (OAW-LC-2G24FP) has 24 Fast
Ethernet (FE) ports that support Serial and Power over Ethernet
(SPOE), and two Gigabit Ethernet Interface Card (GBIC) ports.
(SPOE and POE require 400W Power Supply Units,
OAW-600-PS400).
When connected directly to an IEEE 802.3af POE compatible
device, the port will provide power and data connectivity through
the same cable. For devices that support compatible serial wiring
or include an appropriate serial breakout adapter, such as the
Alcatel Wireless Access Point, the port will provide serial
connectivity as well as power and data.
Physical Description
Module Fastening Screws
These captive fastening screws are used for securing the module
in the switch chassis.
POWER
STATUS
LNK/
ACT
LNK/
ACT
LNK/
ACT
0
1
POE
10
12
24
22
23
ACCESS POINT STATUS
0
2
4
6
8
10
12
14
16
18
20
22
1
3
5
7
9
11
13
15
17
19
21
23
25
0
2
4
6
8
10
12
14
16
18
20
22
24
25
1
3
5
7
9
11
13
15
17
19
21
23
1
1
4
5
2
6
3
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
OmniAccess 6000 LC-2G24FP Installation Notes: Installation Guide 2 Part 031659-00 May 2005 Module Handle This handle is used for removing or inserting the module into the switch chassis. 24 FE Ports These ports are used to connect APs and wired LAN segments to the Alcatel Wireless LAN Switch. These ...
Alcatel OmniAccess 6000 LC-2G24FP Installation Instructions 3 Module Indicator LEDs Power LED This LED lights green when the line card is properly installed and the system is powered up. Status LED During operation, the Status LED provides the following information: Access Point Status LEDs Each LED...
OmniAccess 6000 LC-2G24FP Installation Notes: Installation Guide 4 Part 031659-00 May 2005 2 GBIC ports The GBIC ports can provide high-bandwidth uplinks between the Alcatel Wireless LAN Switch and the wired LAN. The Gigabit Ethernet port sockets accept a variety of Gigabit Interface Converters for ...
