Page 2 - Copyright; Trademarks
OmniAccess 4324: Installation Guide ii Part 031640-00 May 2005 Copyright Copyright © 2005 Alcatel Internetworking, Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. Trademarks AOS-W and Alcatel OmniAccess 4324 are trademarks of Alcat...
Page 3 - Electromagnetic Interference; Industry Canada - Class A
iii Electromagnetic Interference FCC - Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated...
Page 4 - Safety; Lithium Battery Notice; CLASS 1
OmniAccess 4324: Installation Guide iv Part 031640-00 May 2005 Warning—This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. EU - Class A This product complies with EN55022 Class A and EN55024...
Page 5 - Contents; Chapter 1
Contents v Contents Preface vii Overview of this Manual . . . . . . . vii Related Documents . . . . . . . . . viii Text Conventions . . . . . . . . . . . viii Contacting Alcatel . . . . . . . . . . . ix To the Network Manager xi The Alcatel Wireless LAN Solution xi Deployment Summary . . . . . . . ....
Page 6 - Appendix C; Specifications
OmniAccess 4324 Installation Guide: Installation Guide vi Part 031640-00 May 2005 FE Network Ports . . . . . . . . . . . 18 Serial & Power Over Ethernet . 18 Physical Description & LEDs . . 18 Pin Outs . . . . . . . . . . . . . . . . 20 Cables . . . . . . . . . . . . . . . . . 21 GE Uplink P...
Page 7 - Preface; Overview of this Manual
Preface vii Preface This preface includes the following information: z An overview of the sections in this manual z A list of related documentation for further reading z A key to the various text conventions used throughout this manual z Alcatel support and service information Overview of this Manua...
Page 8 - Related Documents; Text Conventions; Type Style; Commands
OmniAccess 4324: Installation Guide viii Part 031640-00 May 2005 Related Documents The following items are part of the complete documentation for the Alcatel system: z Alcatel Wireless LAN Switch Installation Guide (this manual) z Alcatel AOS-W User’s Guide z Alcatel AP Installation Guide Text Conve...
Page 9 - Contacting Alcatel; Web Site
Preface ix Contacting Alcatel Web Site Telephone Numbers z Main Site http://www.alcatel.com z Support http://www.alcatel.com/enterprise z Main US/Canada (800) 995-2612 z Main Outside US (818) 880-3500
Page 11 - To the Network Manager; The Alcatel Wireless LAN Solution
To the Network Manager xi To the Network Manager As with any full-featured network equipment, deploying the Alcatel Wireless LAN (Wireless LAN) solution requires a degree of planning. The process may involve multiple components as well as various individuals in your organization. As the network mana...
Page 12 - Deployment Summary; Physical installation of the Alcatel Wireless LAN Switch; Planning the location of access points and air monitors
OmniAccess 4324: Installation Guide xii Part 031640-00 May 2005 Deployment Summary This section outlines the various tasks involved in deploying the Alcatel Wireless LAN solution, and indicates the document where you can find appropriate instructions. N OTE — Documents named below are included on th...
Page 13 - Physical installation of the Alcatel Wireless Access Points; Monitoring and maintenance
To the Network Manager xiii z Determine how many access points are needed and where they should be located. z Simulate network failures and recovery characteristics, and adjust place-ment if necessary. Refer to the Alcatel AOS-W User Guide for instructions. Physical installation of the Alcatel Wirel...
Page 15 - HAPTER; System Overview; Features
System Overview 1 C HAPTER 1 System Overview The OmniAccess 4324 Wireless LAN Switch is an enterprise-class switch which connects, controls, and intelligently integrates wireless Access Points (APs) and Air Monitors (AMs) into the wired LAN. This chapter introduces you to the Alcatel Wireless LAN Sw...
Page 16 - Physical Description; OmniAccess 4324 Wireless LAN Switch Sys-; System Indicator LEDs; System LEDs; LED; Power
OmniAccess 4324: Installation Guide 2 Part 031640-00 May 2005 z The switch firmware can be easily upgraded as future software releases are made available. You can install upgrades using TFTP. Physical Description F IGURE 1-1 OmniAccess 4324 Wireless LAN Switch Sys- tem System Indicator LEDs 24 FE po...
Page 17 - GE uplink ports; Serial Console port; Holes for attaching rack mounting brackets (on side)
System Overview 3 Chapter 1 2 GE uplink ports The GE ports can provide high-bandwidth uplinks between the Alcatel Wireless LAN Switch and the wired LAN. The GE port sockets accept a variety of Gigabit Interface Converters (GBICs) for versatility in selecting optical and electrical interfaces. See “G...
Page 19 - Installing the Chassis; Pre-Installation Checklist
Installing the Chassis 5 C HAPTER 2 Installing the Chassis This chapter covers the following installation topics: z Precautions to be observed during installation z Requirements for Alcatel Wireless LAN Switch components and rack mounting gear z Selecting a proper environment for the Alcatel Wireles...
Page 20 - Precautions
OmniAccess 4324: Installation Guide 6 Part 031640-00 May 2005 Precautions C AUTION — Hazardous energy is always present while the OmniAccess 4324 Wireless LAN Switch is plugged into an electrical outlet. Remove all rings, jewelry, and other potentially conductive material before working with this pr...
Page 21 - Requirements; Rack Mounting Kit
Installing the Chassis 7 Chapter 2 Requirements Rack Mounting Kit Using the included rack mounting kit, you can mount the Alcatel Wireless LAN Switch in a standard 19-inch network equipment rack. The rack mounting kit contains the following parts: F IGURE 2-1 Rack Mounting Kit N OTE — The four 12-24...
Page 22 - Selecting a Location
OmniAccess 4324: Installation Guide 8 Part 031640-00 May 2005 Selecting a Location The Alcatel Wireless LAN Switch, like other network and computing devices, requires an “electronics friendly” environment. z Reliable power Verify that your electrical outlet is compatible with the Alcatel Wireless LA...
Page 23 - Mounting the Chassis; Verify that your rack environment meets requirements (see; Attaching the Rack Mounting Brackets
Installing the Chassis 9 Chapter 2 Mounting the Chassis Verify that your rack environment meets requirements (see “Selecting a Location” on page 8 ). Attach the rack mounting brackets to the switch chassis as shown in Figure 2-2 . F IGURE 2-2 Attaching the Rack Mounting Brackets Orient both brackets...
Page 24 - Attach the Alcatel Wireless LAN Switch to the rack.; Mounting the Alcatel Wireless LAN Switch
OmniAccess 4324: Installation Guide 10 Part 031640-00 May 2005 Attach the Alcatel Wireless LAN Switch to the rack. N OTE — For proper operation, the Alcatel Wireless LAN Switch requires an ambi- ent air temperature between 0 to 40 ºC (32 to 104 ºF). Verify that your rack environment is in compliance...
Page 25 - Adhere to clearance requirements.; “Keep Clear” Zones
Installing the Chassis 11 Chapter 2 N OTE — Some cabinets require different screws which are not included. Verify that you use the correct screws or fasteners for your rack system. Adhere to clearance requirements. F IGURE 2-4 “Keep Clear” Zones For proper air circulation, leave at least 10 cm (4 in...
Page 26 - Connecting Power; Verify you understand the procedure and all precautions.; Verify that the switch power supply can handle the POE devices.; Attach the power cord to a proper electrical outlet.
OmniAccess 4324: Installation Guide 12 Part 031640-00 May 2005 Connecting Power Verify you understand the procedure and all precautions. Before beginning, read the entire procedure. Verify you understand all the precautions in these steps as well as those on page 6 . Verify that your site’s electric...
Page 27 - Verifying the Installation; Check for the proper power indicators.
Verifying the Installation 13 C HAPTER 3 Verifying the Installation Once the Alcatel Wireless LAN Switch is physically installed, run the following power-on test: Check for the proper power indicators. Immediately upon power up, you should observe the following: z The system Power LED lights solid g...
Page 28 - Once the system has passed the initial power-up test:
OmniAccess 4324: Installation Guide 14 Part 031640-00 May 2005 Once the system has passed the initial power-up test: z Connect appropriate network cables (see Appendix B on page 13 for port and cable information). You are now ready to perform the initial setup as described in the Alcatel Quick Start...
Page 29 - PPENDIX; Power Management; System and Location; OmniAccess 4324 Power Requirements
Power Management 15 A PPENDIX A Power Management Use this worksheet to determine the power required by your Alcatel Wireless LAN Switch. Use a separate copy for each system deployed in your network. System and Location POE Power Requirements Determine the power output required by switch ports that s...
Page 31 - Ports
Ports 17 A PPENDIX B Ports The OmniAccess 4324 Wireless LAN Switch has a number of ports, each with their own purpose: z 24 Fast Ethernet (FE) ports Used for connecting to Access Points (APs) and wired LAN segments. These 10/100 Mbps FE ports aggregate and route traffic under the direction of the sw...
Page 32 - FE Network Ports; Serial & Power Over Ethernet; Physical Description & LEDs; OmniAccess 4324 FE Network Ports
OmniAccess 4324: Installation Guide 18 Part 031640-00 May 2005 FE Network Ports The Alcatel Wireless LAN Switch has 24 10/100 Mbps Fast Ethernet (FE) network ports. The FE ports are used for connecting the switch to wireless Access Points (APs) and wired LAN segments. These ports can also provide po...
Page 33 - FE POE LED; Status
Ports 19 Appendix B FE Network Ports Ports are grouped in banks of 8 (as shown in Figure B-1 on page 18 ). There are 3 banks, for a total of 24 ports. These ports provide 10/100 Mbps Fast Ethernet connectivity, and in some cases, power and serial connectivity as well. See material starting on page 2...
Page 34 - Access Point Status LEDs; Pin Outs; FE Network Port Pin-outs; AP Status LED
OmniAccess 4324: Installation Guide 20 Part 031640-00 May 2005 Access Point Status LEDs Each LED represents the status of APs connected to a specific port on the switch. During operation, the LEDs provide the following information: The LED states in Table B-3 are listed in order of precedence (highe...
Page 35 - Cables; Direct connection to a SPOE compatible device.; Direct connection to a POE compatible device.; Alcatel SPOE Adapter Compatibility; AP Make and Model
Ports 21 Appendix B Cables The type of cable required for each port depends on the device being connected: z Direct connection to a SPOE compatible device. This requires an 8-conductor Category 5 UTP Ethernet cable with an RJ-45 male connector. A straight-through cable is required to preserve POE vo...
Page 36 - Physical Description and LEDs; GE Uplink Ports
OmniAccess 4324: Installation Guide 22 Part 031640-00 May 2005 For cables that run through plenums or air-handling spaces as described in NEC (2002) Article 300.22(C), the cable should be suitable under NEC Article 800.50 and marked accordingly for use in plenums and air-handling spaces with regard ...
Page 37 - Replacing a GBIC; GBIC Removal and Insertion; Approved GBICs; GBIC Type
Ports 23 Appendix B Approved GBICs Approved GBICs are typically selected when the line card is purchased. Although the modules are user-replaceable, for continued safety and reliability only approved modules from approved vendors should be used. The following Class 1 GBICs have been tested with this...
Page 38 - GE Cable Characteristics
OmniAccess 4324: Installation Guide 24 Part 031640-00 May 2005 Cables The following table lists the cable characteristics for approved GBICs: T ABLE 3-2 GE Cable Characteristics GBIC Type Characteristics 1000BASE-T (copper) Cable: Connector: Range: Category 5 UTP RJ-45 Up to 100 m (325 feet) 1000BAS...
Page 39 - Serial Console Port; Port & Adapter Pin Outs; Serial Port; Serial Port Adapter
Ports 25 Appendix B Serial Console Port The serial console port is located on the front panel of the Alcatel Wireless LAN Switch. This port is for connecting a local management console and can be used to access the text-based Command-Line Interface (CLI) to configure, manage, and troubleshoot the Al...
Page 40 - Communications Settings; Console Terminal Settings; Baud Rate
OmniAccess 4324: Installation Guide 26 Part 031640-00 May 2005 Communications Settings T ABLE B-6 Console Terminal Settings Baud Rate Data Bits Parity Stop Bits Flow Control 9600 8 None 1 None
Page 41 - Physical; Physical Specifications; Environmental Specifications; Operational Specifications
Specifications 27 A PPENDIX C Specifications Physical Environment Operation T ABLE C-1 Physical Specifications Item Specification Size Height 4.45 cm (1.75 inches)Width 44.2 cm (17.4 inches)Depth 40.9 cm(16.1 inches) Weight 5.7 KG (12 lbs.) T ABLE C-2 Environmental Specifications Item Specification ...
Page 42 - Certifications; Item
OmniAccess 4324: Installation Guide 28 Part 031640-00 May 2005 Certifications T ABLE C-4 Certifications Item Specification ElectromagneticCompatibility FCC Part 15 Class A CEICES-003 Class AVCCI Class A (Japan) The CE approval mark on back of the product indicates that it meets European Directive 89...
Page 43 - Notes
