AKG HSC 200 SR - Manual
AKG HSC 200 SR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
HSC 200 SR
Broadcast Headset
Description
The HSC 200 SR is a combination of semi-open stereo
headphones and an adjustable electret microphone. The
microphone element rests in a shock mount that suppresses both
cable noise and acoustic headphone leakage.
The microphone operates on phantom powering over the range
from 9 to 52 volts dc. Microphone sensitivity is 7 mV/Pa at 1 kHz.
The microphone connector is a 3-pin XLR type and the headphone
connector is a 0.25 in. (6.3 mm) ring-tip-sleeve stereo jack.
Specifications
Microphone
Transducer Principle:
Condenser prepolarized
Frequency Range:
20–20,000 Hz
Polar Pattern:
Cardioid
Sensitivity at 1,000 Hz:
7 mV/Pa ^
= -43 dBV
Equivalent Noise Level:
< 22 dB-A
S/N Ratio (A-weighted):
> 69 dB
Electr. Impedance:
< 200 ohms
Load Impedance:
> 2,000 ohms
Power Requirement:
9 to 52 volts phantom power
Connector:
3-pin XLR type
Headphones
Transducer Principle:
Dynamic
Type:
Semi-open, supra aural
Frequency Range:
20–20,000 Hz
Rated Impedance:
100 ohms/system
Finish:
Non-reflective black
Connector:
Gold plated 0.25 in. (6.3 mm)
stereo jack
Net/Shipping Weight:
8.8 oz./1 lb. (250 g/450 g)
Included Accessories:
Foam windscreen,
Phantom power adapter
Optional Accessory:
B 18 E Battery Power Supply
Features
• Semi-open headphones
• Shock mounted microphone
• Flexible gooseneck
• Phantom power adapter
• Bass roll-off
• Rugged and lightweight design
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
