AKG C400BL - Manual
AKG C400BL – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C 400 BL
Boundary Layer Condenser Microphone
Description
The AKG Model C 400 BL is a unidirectional boundary
layer microphone intended for table top use. The
microphone’s frequency range has been tailored for speech
applications through a gentle bass roll-off below 200 Hz and
a slight high frequency peak centered at 6 kHz, with a gentle
roll-off above that frequency.
The combination of both narrow pickup angle and
frequency response limited to the voice range makes the
microphone doubly insensitive to ambient noise, a design
known as DNC (Dual Noise Canceling).
The microphone has a high sensitivity of 13.5 mV/Pa and is
available with either a 3-pin XLR connector or a B-lock jack
for the Model C 400 BL/1. The microphone is universally
phantom powered over the range from 9 to 52 volts dc.
Cable length is 5 feet (1.5 meters).
The microphone’s matte black finish can be painted to
match surrounding decor.
Features
• Small & inconspicuous
• Speech optimized
• Unidirectional pickup
• Repaintable
Specifications
Transducer Principle:
Condenser prepolarized
Frequency Range:
40–14,000 Hz
Polar Pattern:
Hypercardioid
Sensitivity at 1,000 Hz:
13.5 mV/Pa (-37 dBV)
Equivalent Noise Level:
< 32 dB-A
Sound Pressure Level for 1% THD:
115 dB
S/N Ratio (A-weighted) :
> 62 dB
Electr. Impedance:
< 200 ohms
Load Impedance:
> 2,000 ohms
Power Requirement:
1.5 to 15 volts
Connector:
3-Pin XLR-type
(B-Lock Jack for C 400 BL-1)
Cable Length:
5 ft. (1.5 m)
Finish:
Non-reflective black
Size:
1.7 x 0.9 x 0.5 in.
(43 x 23 x 13 mm)
Net Weight:
0.2 oz. (5.5 g)
Included Accessories:
Clip-on mounting plate,
Phantom power adapter (for C400BL)
Optional Accessories:
B 18 Battery power supply
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
