AKG C680BL - Manual
AKG C680BL – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C 680 BL
Table Microphone
Description
The C 680 BL is a boundary layer condenser microphone
with a cardioid pattern intended for table use, lecterns, and
houses of worship. The transducer is internally shock
mounted for immunity to impacts on the mounting surface.
The microphone is provided with a roll of non-staining
double-sided adhesive for positive mounting of the
microphone to a table or other flat architectural detail.
The microphone has a sensitivity of 23 mV/Pa and can
directly drive many microphone input stages with limited gain
reserve. The microphone is phantom powered over the range
from 9 to 52 volts dc.
Features
• Small & inconspicuous
• Shock mounted transducer
• Unidirectional pickup
• Repaintable
Specifications
Transducer Principle:
Condenser prepolarized
Frequency Range:
60–20,000 Hz
Polar Pattern:
Cardioid
Sensitivity at 1,000 Hz:
23 mV/Pa (-32 dBV)
30 mV/Pa (-30 dBV)
Equivalent Noise Level:
< 27 dB-A
Sound Pressure Level for 1% THD:
115 dB
S/N Ratio (A-weighted):
> 67 dB
Electr. Impedance:
< 200 ohms
Load Impedance:
> 2000 ohms
Power Requirement:
9–52 volts phantom powering
Connector:
3-Pin XLR type
Cable Length:
3 m (10 ft.)
Finish:
Non-reflective black
Size:
3.8 x 2.6 x 0.8 in.
(97 x 67 x 20 mm)
Net/Shipping Weight:
3.5/10 oz. (100 g/284 g)
Included Accessories:
Phantom power adapter,
adhesive tape
Optional Accessories:
B 18 Battery power supply
N 62 E AC Power supply
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
