AKG C547BL - Manual
AKG C547BL – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C 547 BL
Boundary Layer Condenser Microphone
Description
The C 547 BL is a condenser boundary layer microphone
with a hypercardioid pickup pattern. Its rugged construction
permits it to be used on the floor, where it can withstand
accidental footsteps. It has a switchable low frequency roll-
off filter to minimize footfalls on stage. The microphone
works as well on a tabletop.
Microphone sensitivity is 8.5 mV/Pa, and total harmonic
distortion (THD) is 1% at an acoustical operating level of
133 dB. The equivalent noise floor is 22 dB-A. The
microphone operates on phantom powering over the range of
9 to 52 volts dc. The finish is matte black, and the
microphone can be painted any color to match decor.
The connector is a 3-Pin XLR.
Features
• Non-crush construction
• Inconspicuous
• Unidirectional pickup
• Paintable
Specifications
Transducer Principle:
Condenser prepolarized
Frequency Range:
30–18,000 Hz
Polar Pattern:
Hypercardioid
Sensitivity at 1,000 Hz:
8.5 mV/Pa (-42dBV)
Equivalent Noise Level:
< 22 dB-A
Sound Pressure Level for 1% THD:
133 dB
S/N Ratio (A-weighted):
> 72 dB
Electr. Impedance:
< 400 ohms
Load Impedance:
> 1,000 ohms
Low frequency roll-off:
switchable bass-cut
12 dB/octave, 200 Hz
Power Requirement:
9–52 volts phantom powering
Connector:
3-Pin XLR-type
Cable Length:
10 ft. (3 m)
Finish:
Matte dark gray
Size:
7.3 x 4.7 x 0.8 in.
(185 x 120 x 20 mm)
Net/Shipping Weight:
5.6 oz. (160 g)/14.8 oz. (420 g)
Included Accessories:
W 547 Windscreen
Optional Accessories:
B 18 Battery power supply
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
