Page 2 - PRECAUTIONS; WARNING; CAUTION
2 En PRECAUTIONS Read these Operating Instructions carefully and completelybefore operating the unit. All precautions on this bookletand on the unit should be strictly followed.Keep the Operating Instructions for future reference. Installation 1 Water and moisture — Do not use this unit near water, ...
Page 3 - TABLE OF CONTENTS; System and accessories
3 En TABLE OF CONTENTS PRECAUTIONS .................................... 2 PREPARATIONS ................................... 4 PARTS AND CONTROLS ......................... 5 ADJUSTMENTS BEFORE OPERATIONS ........ 8 CD OPERATIONS ................................ 10 RADIO OPERATIONS .......................
Page 4 - Connection; PREPARATIONS; Remote control
4 En Connection Plug in the AC power cord to the wall socket after all otherconnections are made. 1 Connect the front speakers. Connect the right front speaker (marked "R" on the rearside) to the SPEAKERS R terminals and place it on theright side of the unit. Connect the left (marked "L&...
Page 5 - terminals; SPEAKERS; PARTS AND CONTROLS; Dynamic Integrated New Amplifier
5 En Main unit: rear 1 CD DIGITAL OUT (OPTICAL) jack Outputs CD digital sound signals to digital audioequipment. Remove the dust cap and connect using anoptional optical cable plug. When this jack is not beingused, attach the supplied dust cap. 2 MW/LW LOOP, FM 75 Ω terminals Plug in the supplied MW...
Page 8 - ADJUSTMENTS BEFORE OPERATIONS; Power; DEMO; Spectrum analyzer display; Volume; Dial Function
8 En ADJUSTMENTS BEFORE OPERATIONS Power Turning the unit on Press POWER 6 STANDBY/ON (POWER on the remote control). Turning the unit off Press POWER 6 STANDBY/ON again. The unit goes into standby. DEMO If the clock has not been set, a DEMO appears on the displaywhen the unit is turned off. To deact...
Page 9 - Dimmer; Setting the clock; ECO mode
9 En Dimmer Adjusts the brightness of the display. 1 Press DEMO/ECO twice when the unit is turnedon, and then within 4 seconds press ENTER. 2 Turn MULTI JOG to select one of the three dimmermodes or " DIM-OFF ", and then press ENTER. " DIM-OFF " is the brightest and " DIMMER 3 &#...
Page 10 - Playback; CD OPERATIONS; Random/Repeat playback
10 En This unit plays back finalized CD-R/RW discs as well as audioCDs. Playback 1 Turn the Dial Function to select the CD functionand load disc(s). Press z CD OPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labelled side up.To place three discs, press DISC CHANGE so th...
Page 11 - Programmed playback
11 En Programmed playback Plays back up to 30 selected tracks in programmed order. 1 Press SHIFT+PROGRAM on the remote controlduring stop. " PRGM " flashes on the display. 2 Press CD DIRECT on the remote control and thenpress the numbered button (1-3) within 3seconds to select a disc. Go to ...
Page 12 - RADIO OPERATIONS; Manual tuning; Preset tuning; Manual presetting; Automatic presetting
12 En RADIO OPERATIONS Manual tuning 1 Turn the Dial Function to select the TUNERfunction. 2 Press BAND to select a band (FM, MW or LW). 3 Press f or g to tune in to a station. " TUNE " is displayed when a station is tuned in. " 1 " lights up for FM stereo reception. " RDS " ...
Page 13 - Tuning in to preset stations; RDS features
13 En Tuning in to preset stations On the unit 1 Turn the Dial Function to select the TUNERfunction and press BAND to select a band. 2 Press d repeatedly or turn MULTI JOG. With each press, the station with the succeeding presetnumber is tuned in. On the remote control 1 Press FUNCTION repeatedly to...
Page 15 - Adjustments
15 En Auto Graphic equalizer (AG) The unit automatically selects a sound equalization curve tomatch the music program type (PTY) data being transmittedfrom the station. (e.g. 'POP' curve is selected for POP M [PTY].) Press AG when tuning in to an RDS station. " AG " lights up. To cancel AG f...
Page 16 - TAPE OPERATIONS
16 En TAPE OPERATIONS Playback Use only type I (normal) tapes. 1 Turn the Dial Function to select the TAPE function. 2 Press z PUSH EJECT/CLOSE on either side (DECK 1 and DECK 2) to open the outer cassetteholder and insert the tape in the deck. Insert with the exposed side down and playback side fac...
Page 17 - Basic recording; Whole tape dubbing; Edited CD recording; AI Edit Recording
17 En Basic recording Use only type I (normal) tapes. DECK 2 is the recording deck.Only one side of the tape can be recorded at a time. 1 Insert the recording tape in DECK 2. Press z PUSH EJECT/CLOSE to open the outer cassette holder, and insert with the exposed side down and theside to be recorded ...
Page 18 - Programmed Edit Recording
18 En 6 Press w REC/REC MUTE to start recording on side A. On the remote control, press REC MODE and then press w REC/REC MUTE within 3 seconds. The tape is rewound to the beginning of side A andrecording starts.Go to the next step when recording on side A finishes. 7 Press SHIFT+CD EDIT/CHECK once ...
Page 19 - SOUND ADJUSTMENTS; Graphic equalizer; Setting a curve manually
19 En SOUND ADJUSTMENTS Graphic equalizer Selects a sound equalization curve to match the music type. Press MODE once and then turn MULTI JOG within4 seconds to select one of the four equalizationcurves. On the remote control, press GEQ and then press PRESET N or M repeatedly within 4 seconds. - ROC...
Page 20 - TIMER OPERATIONS; Sleep timer; Timer playback
20 En TIMER OPERATIONS Sleep timer Turns off the unit automatically after a specified time. 1 Press SHIFT+SLEEP on the remote control. " SLP " appears on the display. 2 Press f or g repeatedly to set the sleep timer duration. With each press, the timer duration changes in 5-minutesteps betwe...
Page 21 - Timer recording
21 En To display the timer setting Press TIMER.The timer-on time, the source and the timer-activated durationare displayed for 6 seconds. Tip: Timer setting can be displayed even while the unit is turnedoff, and at that time if you press ENTER or a within 6 seconds after TIMER is pressed, you can en...
Page 22 - Care and maintenance; REFERENCE; Troubleshooting
22 En Care and maintenance Occasional care and maintenance of the unit and the softwareare needed to optimize the performance of your unit. To clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremelydirty, use a soft cloth lightly moistened with mild detergentsolution. Do not u...
Page 23 - Specifications
23 En Specifications MAIN UNIT CX-NR71TUNER FM tuning range 87.5 MHz to 108 MHz FM usable sensitivity (IHF) 16.8 dBf FM antenna terminal 75 ohms (unbalanced) MW tuning range 531 kHz to 1602 kHz (9 kHz step)530 kHz to 1710 kHz (10 kHz step) MW usable sensitivity 350 µV/m LW tuning range 144 kHz to 29...
