Aiphone LEM - Manual
Aiphone LEM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
- INSTRUCTIONS -
The LS-NVP is a vandal proof sub station designed for use with the systems listed above. The LS-NVP-
W is the weather resistant model. Both are constructed of 11 gauge carbon steel with a white powder-
coated finish. The LS-NVP(-W) can be flush or surface mounted with the SBX-NVP. Each unit includes
tamper proof screws and tool for installation.
LS-NVP (-W)
Vandal Proof Sub Station for LAF-C, LEF, LEM, AP-M, MP-S Systems
SBX-NVP
Surface Mount Box for LS-NVP
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
TOLL FREE FAX LINE:
(800) 832-3765
E-MAIL: [email protected]
LS-NVP Instr
0698bkjd
SPECIFICATIONS:
Power Source:
Supplied by master station
Speaker:
20 ohms, 3" diameter, water proof and puncture resistant, 2.5 oz. ceramic magnet
Call Button:
Single pole, single throw (SPST), normally open (N/O)
Faceplate:
11 gauge carbon steel with powder-coated white baked epoxy finish
Communication:
Hands free at sub. Master is push-to-talk,release-to-listen
Mounting Hardware:
Tamper proof screws
Terminations:
Color-coded prewired pigtails
Wiring:
RED to # terminal, BLK to "E" (Common) terminal, GRN to "-" terminal
Shielded cable is recommended.
Use Aiphone #822202 or #821802 for homerun wiring, #822206 for up to 4 stations
on each run, or #822210 for up to 8 stations on each run.
Wiring Distance:
650' with 22AWG; 1,600' with 18AWG.
Dimensions (H x W x D):
LS-NVP alone: 7-1/2" x 5-1/2" x 2". With SBX-NVP: 8-5/8" x 6-5/8" x 2-1/4"
+
-
WIRING DIAGRAM:
1
2
~
10
E
+
-
Red
Blk*
Grn
Red
Blk*
Grn
LAF-C or LEF
Master
LS-NVP
LS-NVP
PS-12C
Switch on PC board:
Leave in the LOWER
position (set from factory),
for use with LEM, LAF-C and
LEF systems
* In single master system, 2
conductors homerun can be
used with the BLK and GRN
wires tied together and "E"
and "-" jumpered at the
master.
WIRING DIAGRAM:
1
E
~
10
E
AP-M or MP-S
Master
Switch on PC board:
Move to the UPPER position
for use with AP-M or MP-S
systems.
Tie Blk and Grn wires
together for all installations
with the MP-S and AP-M
systems.
Red
Blk
Grn
LS-NVP
Special
Order
Products
Red
Blk
Grn
LS-NVP
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
