AEG L7WC8632BI- User Manual

2.4 Use WARNING! Risk of injury, electric shock, fire, burns or damage to the appliance. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. • Do not touch the glass door while a programme is in operation. The glass can get hot. • Do not dry da...

3.2 The appliance is equipped with ... x1 x2 x1 E x2 x1 x1 x1 x2 x4 x1 x1 B A C D F G H L 3.3 Unpacking WARNING! Use the gloves. WARNING! Remove all the packaging and the transit bolts before installing the appliance. 1. Put two polystyrene packaging elements on the floor under theappliance. WARNING...

1 2 3. Remove the polystyrene protection from the bottom. 1 2 4. Return the appliance in vertical position and remove the socketpolystyrene protection. 5. Remove the power supply cable and the drain hose from the hose holders. It is possible to see water flowing from the drain hose. This is due to t...

F G 7. Close the holes with the plastic caps you find in the user manual bag. Put thesmallest cap F in upper hole and the two bigger caps G in lower holes. We recommend that you keep the packaging and the transit bolts for any movement of the appliance. 3.4 Installation on suspended flooring Suspend...

The appliance must be level and stable. CAUTION! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. 3.6 Hose and cable connection 1100 mm 1450 mm 960 mm 1230 mm 900 mm 1360 mm ma x 1 0 0 0 mm mi n . 6 0 0 mm ma x 1 0 0 0 mm mi n . 6 0 0 mm The inlet hose...

20 O 20 O 45 O 45 O 3. Connect the hose to the back of the appliance. Do not turn the inlet hosedownwards, but turn it left or right dependingon the position of your water tap. 4. Loosen the ring nut to fix it in the correct position. 5. Connect the water inlet hose to the cold water tap with 3/4 th...

m a x . 6 0 0 m m To a sink spigot Put the drain hose in the spigot and tighten itwith the supplied cable tie L . Make sure that the drain hose makes a loopto prevent particles going into the appliancefrom the sink. L To a wall-pipe Directly to a built-in drain pipe in the roomwall and tighten it wi...

The appliance is also equipped with anadhesive sponge pad H that you can find inside the drum.Attach it on the top of the appliance whereindicated in the drawing.When levelling the appliance under thefurniture, DO NOT squeeze the sponge pad. Before proceeding with appliance building in,bring it near...

~10mm 2. Adjust the anti-tilting device so that the distance from the counter is 10mm. Loosenthe nut counterclockwise with a 3mm wrench.Adjust the height and turn the nut clockwiseto fix it. 3.9 Preparation and assembly of the cupboard door The dimensions of the cupboard door should be:• width min. ...

M N O If the cupboard door has to be opened fromleft to right, invert the position of the hingesupports M with the magnetic plate N and lower plate O . M N O Make sure that the plate with magnet is on the upper position. x y y Cupboard door preparation For countersinking the door, it is recommended ...

4. PRODUCT DESCRIPTION 4.1 Appliance overview 10 11 12 13 2 1 3 5 4 7 6 8 9 1 Hinge supports 2 Detergent dispenser 3 Control panel 4 Magnetic plate 5 Door handle 6 Rating plate 7 Plate with rubber beater 8 Drain pump filter 9 Front feet for levelling the appliance 10 Drain hose 11 Mains cable 12 Inl...

The permanent options are set by holding pressed the relative button for at least 3 seconds. 1 Programme dial 2 Spin touch button 3 Temp. touch button 4 Display 5 Time Dry touch button 6 Auto Dry touch button 7 Start/Pause touch button 8 Delay Start touch button 9 Mode - Dry touch button andpermanen...

6. DIAL AND BUTTONS 6.1 Introduction The options/functions are not available with all washing programmes. Check the compatibility between options/functions and washing programmes in the "Programme Chart". An option/function can exclude another one, in this case the appliance doesn't allow yo...

The options can increase the programme duration. 6.7 Permanent Extra Rinse With this option you can permanently have an extra rinse when you set a new programme.To activate/deactivate this option, hold the Prewash button pressed for 3seconds until the indicator comes on/ goes off on the display. Whe...

When setting a steam programme, this button allows to chose three steam levels and the programme duration is reduced accordingly:• : maximum. • : medium. • : minimum. 6.11 Child Lock With this option you can prevent children from playing with the control panel.To activate/deactivate this option, hol...

7. PROGRAMMES 7.1 Programme Chart ProgrammeDefault tem-peratureTemperaturerange Referencespin speedSpin speedrange Maxi- mum load Programme description (Type of load and soil level) Washing programmes Cottons40 °C90 °C - Cold 1600 rpm(1600- 400rpm) 8 kg White cotton and coloured cotton . Normal, hea...

ProgrammeDefault tem-peratureTemperaturerange Referencespin speedSpin speedrange Maxi- mum load Programme description (Type of load and soil level) Steam - 1 kg Cottons, Synthetics, Delicates. Short and gen- tle steam programme to refresh even your verydelicate garments, including very delicate gar-...

ProgrammeDefault tem-peratureTemperaturerange Referencespin speedSpin speedrange Maxi- mum load Programme description (Type of load and soil level) Anti-allergy60 °C 1600 rpm(1600 - 400rpm) 8 kg White cotton items . This programme removes micro-organisms thanks to a washing phase withthe temperature...

ProgrammeDefault tem-peratureTemperaturerange Referencespin speedSpin speedrange Maxi- mum load Programme description (Type of load and soil level) Reset position. The display shows dashes only. 1) Cottons energy saving programme . This programme at 60ºC with a load of 8 kg is the reference pro- gra...

Programme Spin No Spin 1) Prewash 2) Stains Time Save Delay Start Anti-allergy ■ ■ ■ ■ ■ ■ ■ ■ ■ Sportswear ■ ■ ■ ■ ■ ■ ■ Outdoor ■ ■ ■ ■ ■ ■ Denim ■ ■ ■ ■ ■ ■ ■ NonStop 60min ■ ■ 1) This option excludes the option. 2) Prewash and Stains cannot be selected together. 3) If you set the No Spin option,...

7.3 Automatic drying Dryness Level Type of fabric Load 1) Extra Dry For towelling materials Cottons and Linen (bathrobes, bath towels, etc) up to 4 kg Denim garments up to 3 kg 1) Cupboard Dry 2) For items to be stored Cottons and Linen (bathrobes, bath towels, etc) up to 4 kg Synthetics and mixed f...

7.4 Timed drying Dryness Level Type of fabric Load(kg) Spinspeed(rpm) Suggestedduration(mins) Extra Dry For towellingmaterials Cottons and Linen (bathrobes, bath towels, etc) 4 1600 170 - 190 2 1600 110 - 120 1 1600 65 - 75 Denim garments 3 1200 155 Cupboard Dry For items to bestored Cottons and Lin...

completed, touch the Mode - Wash and the Prewash buttons simultaneously for about 2 seconds. The display shows On or Off. If you deactivate the acoustic signals, they continue to operate when the appliance has a malfunction. 9. BEFORE FIRST USE 1. Make sure that the electrical power is available and...

10.3 Filling the detergent and additives - Compartment for prewash phase, soak programme or stain remover. - Compartment for washing phase. - Compartment for fabric softener and other liquid treatments(fabric conditioner,starch). - Maximum level for quantity of liq- uid additives. - Flap for powder ...

The display also shows the remaining programme time. 11.4 At the end of the drying programme • The appliance stops automatically. • The acoustic signals operate (if they are active). • In the display comes on. • The indicator of the Start/Pause button goes off. The door locked goes off. The applianc...

12.3 Timed Drying 1. Tap on the Time Dry button repeatedly to set the desired time value (see the "Timed drying" table the "Programmes" chapter). Thedrying level indicator goes off andthe indicator comes on. Each time you tap on this button the time value increases by 5 minutes. The ...

14. HINTS AND TIPS WARNING! Refer to Safety chapters. 14.1 The laundry load • Divide the laundry into: white, coloured, synthetics, delicates and wool. • Follow the washing instructions on the laundry care labels. • Do not wash white and coloured items together. • Some coloured items can discolour w...

15. CARE AND CLEANING WARNING! Refer to Safety chapters. 15.1 External cleaning Clean the appliance with mild soap and warm water only. Fully dry all the surfaces. CAUTION! Do not use alcohol, solvents or chemical products. CAUTION! Do not clean the metal surfaces with chlorine-based detergent. 15.2...

1 2 10. Close the pump cover. When you drain the water with the emergency drain procedure, you must activate the drainsystem again:1. Put 2 litres of water in the main wash compartment of the detergent dispenser.2. Start the programme to drain the water. 15.8 Cleaning the inlet hose and the valve fi...

15.10 Frost precautions If the appliance is installed in an area where the temperature can reach values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Put the two ends of the...

16.2 Possible failures Problem Possible solution The programme does not start. • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed.• Make sure that there is no damaged fuse in the fuse box.• Make sure that the Start/Pause has been touched.•...

Problem Possible solution The appliance does notdry or does not dry cor-rectly. • Turn the water tap on.• Make sure the drain filter is not clogged.• Reduce the laundry load.• Make sure you have set the correct cycle. if necessary, set again a short drying time. The laundry is full of dif-ferent col...

4. Take out the laundry and then close the appliance door. 17. CONSUMPTION VALUES Stated values are obtained in laboratory conditions with relevant stand- ards. Different causes can change the data: the quantity and type of laundry and ambient temperature. Water pressure, the supply voltage and the ...

Electrical connection VoltageOverall powerFuseFrequency 230-240 V2000 W13 A50 Hz Level of protection against ingress of solid particlesand moisture ensured by the protective cover, ex-cept where the low voltage equipment has no pro-tection against moisture IPX4 Water supply 1) Cold water Water suppl...