AEG 88830 - Manual

Instructions for use 6 INSTRUCTIONS FOR USE 1 Safety The safety of AEG electrical appliances conforms to the recognised technical regulations and the legislation covering the safety of appli-ances. However, as manufacturers, we still regard it as our responsibility to inform you of the following saf...

Instructions for use 7 Child Safety • Packaging components (e. g. films, polystyrene) can be hazardous to children. Risk of suffocation! Keep packaging away from children. • Children often cannot recognise the hazards associated with handling electrical appliances. Therefore, ensure the necessary su...

Instructions for use 8 2 Disposal Dispose the packing material! Dispose of your washing machine's packaging correctly. All the packag-ing materials used are harmless to the environment and can be recy-cled. • Plastic parts are marked with standard international abbreviations: • Cardboard packaging i...

Instructions for use 9 Unit Description Front View Drawer for Washing Powder and Care Agent Drawer for washing powder and care agent Filling door Screw feet (height-adjustable);rear left: Automatic adjustment foot Control panel Flap in front of solution pump Rating plate(behind filling door) Pre-was...

Instructions for use 10 Control panel Program Selector The program selector determines the type of washing cycle (e.g. water level, drum movement, number of rinses, spin speed) according to the type of gar-ments being washed, and also the washing solution. OFF (ARRET) Switches off the washing machin...

Instructions for use 12 Additional Program Buttons The additional program buttons are for adapting the washing program to the dirtiness of the wash-ing. Additional programs are not required for washing which is not excessively dirty. Various functions can be combined with each other, depending on th...

Instructions for use 13 Consumption Values and Time Requirements The values for selected programs in the following tables were deter-mined under normal conditions. However, there is a helpful orientation aid for domestic operation. Program Selector / Temperature Filling Quantity in kg Water in litre...

Instructions for use 14 Running Time Display 3 The running times of the washing programs depend on the usual washing practice and the ambient conditions at the installation location. The washing type and quantity, the type of washing powder, the water temperature and the room temperature etc. can in...

Instructions for use 15 What Does ”Update” Mean? The washing programs of your washing machine are controlled by soft-ware.New types of textiles or new washing powders / liquids could, in the future, require new washing programs. The software can be adapted to these in most cases.For further informat...

Instructions for use 16 Before the First Wash 0 Carry out a washing operation without washing (COTTONS/ BLANC 95 °C, with half the quantity of washing powder / liquid).This removes residues left over from production on the drum and solution container. Prepare the Washing Cycle Sort and Prepare the W...

Instructions for use 17 Washing Types and Care Codes The care codes help you choose the correct washing program. The washing should be sorted according to type and care code. The temper-atures stated in the care codes are all maximum values. Cottons ç Textiles made of cotton and linen with this care...

Instructions for use 18 Washing Detergents and Care Agents Which washing detergnet and care agent ? Use only washing detergents and care agents which are suitable for use in washing machines. Always follow the manufacturer's instructions. How much washing detergent and care agent ? The amount to be ...

Instructions for use 19 Run a Washing Cycle Brief Instructions A washing cycle is run in the following steps: 0 1. Set the correct washing program:– Set the program and temperature with the program selector– Set any additional program(s) 2. Change the spin speed if necessary / select RINSE HOLD (SAN...

Instructions for use 20 Setting the Washing Program 3 See "Program Tables“ for a suitable program, correct temperature and possible additional programs to suit the type of washing. 0 1. Set the program selector to the required washing program with the required temperature. The selected program i...

Instructions for use 21 Change the spin speed/Select rinse hold 0 If necessary, select the spin speed for the final spin. Press the button SPIN SPEED (VITESSE D´ESSORAGE) as often as is necessary until the required spin speed appears in the display. • 1800, 1400, 1200, 1000, 800, 600 or 400 revoluti...

Instructions for use 22 Soaking duration If you keep button SOAKING (TREMPAGE) depressed and at the same time actuate the TIMER DELAY button (DEPART DIFFERE) you can extend the soaking duration from 1 up to a maximum of 19 hours. 3 Without a preselected time the soaking duration is approx. 1 hour. O...

Instructions for use 23 Add Washing Detergent and / Care Agent. 3 Refer to the information on washing detergents and care agents, see section ”Washing Detergents and Care Agents”. 0 1. Open the washing detergent drawer: grip inside the flap on the drawer at the bottom (1) and pull out the drawer as ...

Instructions for use 24 Start the washing program 0 1. Check that the water valve is open. 2. Start the washing program: Press button START / PAUSE (MARCHE/PAUSE).The washing program is started or it starts after the set time expires. 3 If DOOR/LIGHT (PORTE/LUMIERE) flashes red when the button START...

Instructions for use 25 Completion of the Washing Program Program sequence display Prior to the start the program steps to be executed are displayed by the program sequence display. The current program step is displayed during the washing program. Multi-display The expected remaining run time (in mi...

Instructions for use 26 Abort program 0 Turn the program selector to OFF (ARRET) to abort the washing program. 3 The washing program can be interrupted at any time by pressing the START / PAUSE (MARCHE/PAUSE) button and then continued by pressing it again. The washing cycle is finished / Remove the ...

Instructions for use 28 Program Tables Washing Not all possible settings are listed below - only the ones most com-monly used in everyday operation and the most appropriate ones. Type of Washing, Care Codes Max. Filling Quantity (dry weight) 1) 1) A 10-litre bucket holds approx. 2.5 kg of dry washin...

Instructions for use 29 Separate Conditioning / Starching / Impregnating Separate Spin Type of Washing Max. Filling Quantity (dry weight) Program Selector Cottons / Linen 5 kg STARCHING (AMIDON.) Type of Washing Max. Filling Quantity (dry weight) Program Selector Cottons / Linen 5 kg SPIN (ESSORAGE)...

Instructions for use 30 Cleaning and Care Control Panel Attention! For cleaning panels and control parts, do not use furniture polish or any aggressive cleaning agents. 0 Wipe off control panels with a damp cloth. Use warm water to do this. Washing Detergent Drawer The washing detergent drawer shoul...

Instructions for use 31 7. Use a brush to clean the entire rinsing-in part of the washing machine, especially the nozzles on the top side of the rinsing-in chamber. 8. Insert the washing detergent drawer into the guide rails and push it in. Washing Drum The washing drum is made of high-quality stain...

Instructions for use 32 Cleaning the drain pump Paper clips, nails and so on can sometimes get into the washing machine with the washing and remain in the drain pump casing. Fluff and strands of fabric can gather on these items and block the drain pump.Therefore the drain pump should be cleaned at l...

Instructions for use 33 What to do if ... Remedying Faults In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technicia...

Instructions for use 37 If the washing result is not satisfactory If the washing is grey and limescale forms in the drum • Not enough washing detergent added. • The right washing detergent was not used. • Special types of stain were not pretreated. • Program or temperature incorrectly set. • If bina...

Instructions for use 38 Carry Out an Emergency Emptying Operation • When the washing machine no longer pumps off the washing solu- tion, an emergency emptying operation must be carried out. • When the washing machine is in a room where there is a frost risk, an emergency emptying operation must be c...

Instructions for use 39 When all the washing solution has drained off: 6. Firmly push the plug into the emergency emptying hose and turn it tight clockwise. 7. Put the emergency emptying hose back into the holder. 8. Insert the flap into the base panel and close. Emergency Unlocking of the Filling D...

Instructions for use 40 3. While RINSE + (RINCAGE + ) is flashing, release the button SOAKING (TREMPAGE).After the flashing stops, the additional rinse is set. It is set until it is canceled again.When the additional rinse is set, the indicator RINSE + (RINCAGE + ) lights up on the program sequence ...

Instructions for use 41 Set the Solution Cooling: 0 1. Turn the program selector to SHORT SPIN (ESSORAGE DELICAT). 2. Keep the button PRE WASH (PRELAV.) pressed for at least 5 seconds.After the button has been pressed for 5 seconds, MAIN WASH (LAVAGE) flashes on the program sequence display for 5 se...

Instructions for use 42 Program Saving To protect a program setting against unwanted changes (e. g. turning the program selector, pressing auxiliary buttons etc.), you can set the program saving function. This prevents damage to your washing. 3 Setting and cancelling the program saving function is p...

Instructions for use 43 Child Safety Feature When the child safety feature is used, the filling door can no longer be closed and no more washing programs can be started. Setting the Child Safety Feature: 0 Use a coin to turn the rotary knob (on the inside of the filling door) clockwise as far as it ...

Setting up and connection instructions 44 SETTING UP AND CONNECTION INSTRUCTIONS Safety Instructions for Installation • Do not tilt the washing machine onto its front or onto its right side (looking from the front). Electrical components could get wet! • Check the washing machine for transport damag...

Setting up and connection instructions 45 Setting Up the Unit 3 Washing machines with curved panels are not suitable for substruc- tures . Transporting the Unit • Do not place the washing machine on its front side or on its right side (looking from the front). Otherwise the electrical components can...

Setting up and connection instructions 47 Prepare the Installation Location • The installation surface must be clean, dry and free of floor wax resi- due and other lubricating coatings so that the unit does not slide away. Do not use any lubricants as sliding aids. • It is not recommended to set up ...

Setting up and connection instructions 48 Compensate for Floor Unevenness 3 Automatic Adjustment Foot: Your washing machine's rear left foot is of a spring leg design. This guarantees good stability of the unit, even at high spinning speeds. If the washing machine still does not stand firmly enough ...

Setting up and connection instructions 49 Electrical Connection Refer to the rating plate for details of the mains voltage, current type and the necessary fuses. The rating plate is located at the top behind the filling door. ; This unit conforms to the following EU directives:– the ”Low Voltage Dir...

Setting up and connection instructions 50 Water Inflow A pressure hose 1.5 m in length is supplied.If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections offered by our Customer Service is permissible.– Sets of hoses in lengths of 2.2 m, 3....

Setting up and connection instructions 51 Water Drainage The drainage hose can either be connected to a siphon or hung in a wash basin or bath tub. Only original hoses may be used for extension purposes (max. 3m on the floor and then up to 80 cm high). The Customer Service stocks hoses in lengths of...

Setting up and connection instructions 52 Delivery Heads over 1 m To pump off the washing / rinsing agent, every washing machine has a pump which transports liquids via the drainage hose up to a height of 1 m, calculated from the machine's floor. For delivery heads over 1 m, consult the Customer Ser...

Index 54 INDEX A Abort program . . . . . . . . . . . . . . . . . . . . . . . 26 Aqua Control . . . . . . . . . . . . . . . . . 15 , 27 , 35 Automatic adjustment foot . . . . . . . . . . 9 , 48 C Care agent . . . . . . . . . . . . . . . . . 9 , 18 , 19 , 23 Child safety feature . . . . . . . . . . . ...

Service 55 SERVICE In the section ”What to do if ...” there is a list of some faults which you can remedy yourself. Look there first if a fault occurs. If you find no information there, please consult your Customer Service Centre. Always prepare in advance for the discussion. By doing so you will si...