Page 2 - for pErfEct rEsUlts; Visit our website for:; cUstoMEr cArE AND sErVIcE
22 1. IMpOrtaNt safEty INstructIONs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. fOr yOur safEty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. DEscrIptION Of yOur applIaNcE . . . . . . . . . . . . . . . . . . ...
Page 3 - IMportANt sAfEty INstrUctIoNs
33 Installation, cleaning and servicing an authorised person must install this appliance (certificate of compliance to be retained) .Before using the appliance, ensure that all packing materials are removed from the appliance .In order to avoid any potential hazard, the enclosed installation instruc...
Page 5 - for yoUr sAfEty; If you smell gas; Important information for the installer
5 for yoUr sAfEty If you smell gas • Turn off gas supply at source.• Extinguish all naked flames.• Do not operate any electrical appliances.• Ventilate the area.• Check for leaks as detailed in this manual.If odour persists, contact your dealer or gas supplier immediately . Do not tamper with the ap...
Page 6 - DEscrIptIoN of yoUr ApplIANcE; control panel
6 DEscrIptIoN of yoUr ApplIANcE programmable controler Gas hob burner controls control panel high heat burner low heat burner Intense heat wok burner Gas Hob Medium heat burner Model 49669Go-MN freestanding gas hob with flame safeguard, programmable touch control electric oven removable wok trivet r...
Page 7 - control panel – oven programmable controller
7 programmable controler control panel – oven programmable controller Model BE7900061M Built-in programmable touch control electric oven
Page 8 - setting the time
8 BEforE opErAtING yoUr ApplIANcE for tHE fIrst tIME setting the time the model you have purchased is fitted with a programmable timer . you Must set the time of day before you can operate the appliance . programmable controller: • After the appliance has been electrically connected, the set clock s...
Page 9 - INstAllING yoUr oVEN AccEssorIEs; prior to installing accessories, remove all; side racks; to fit a shelf or try to telescopic sides:
9 INstAllING yoUr oVEN AccEssorIEs prior to installing accessories, remove all packaging and remove plastic film from external panelscatalytic liners catalytic liners are coated with a specially formulated enamel coating . this porous coating enables the “self cleaning” process – see cleaning your a...
Page 10 - INstAllING BUrNErs AND trIVEts; Installing burners; Installing trivets
10 INstAllING BUrNErs AND trIVEts Installing burners • The burner crown must be fitted correctly into the burner cup or damage will occur during operation . • To do this, ensure that the 2 ribs on either side of the spark plug hole are positioned into the 2 slots on the burner cup . • The burner cap...
Page 11 - GEttING to kNow yoUr GAs cooktop; Using your gas hotplates; lighting burners; Electronic ignition; Medium heat burner
11 GEttING to kNow yoUr GAs cooktop Using your gas hotplates NOTE: Gas controls turn anticlockwise from ‘Off’ and have limited movement. lighting burners Electronic ignition these hobs are fitted with mains powered electronic ignition . when the appliance has been connected and the power is on, depr...
Page 12 - UsING yoUr oVEN; Understanding your oven functions; rapid Heat
12 UsING yoUr oVEN Understanding your oven functions rapid Heat function 1 heat comes from the elements surrounding the fans as well as the smaller element above the food . this allows you to preheat your oven 30% quicker than on standard “Bake” . “rapid heat” is ideal for cooking frozen pre- cooked...
Page 14 - Using your programmable controller to operate the oven
14 UsING yoUr oVEN (coNtINUED) setting the time of day after the appliance has been electrically connected the “set clock” symbol will flash on the clock display . 1 . to set the time of day in hours and minutes press the – or +. 5 seconds after the last change the “timer arrow” will disappear, conf...
Page 16 - cookING tEst; Get to know your new oven with this; ‘simple test cake’
16 cookING tEst Get to know your new oven with this ‘simple test cake’ although we strive for a perfect performing oven, it’s possible that there will be some variation in colour when baking . therefore, we suggest this simple, easy and delicious to make simple test cake, it can help you understand ...
Page 17 - cookING GUIDE; oven shelf location
17 cookING GUIDE • For best baking results preheat oven for 30 minutes.• Select the correct shelf location for food being cooked . • The grill tray can be used in the oven as a baking dish, except in oven shelf location 1 . • Make sure dishes will fit into the oven before you switch it on . • Keep e...
Page 18 - choosing the best oven settings; Modes without oven fan
18 cookING GUIDE (coNtINUED) choosing the best oven settings the following table is intended as a guide and experience may show some variation in cooking times necessary to meet individual requirements . we recommend that you preheat your oven for 30 minutes . Modes without oven fan food temperature...
Page 19 - roasting Meat; roasting poultry and fish; Grilling GUIDE; Grilling is conducted with the oven door closed
19 cookING GUIDE (coNtINUED) roasting Meat 1 . place the meat in the oven and set the temperature between 180°c and 200°c . It is recommended to wrap your meats in an oven roasting bag or foil to prevent fats and oils from splattering, making it easier to clean your oven . 2 . use the grill / oven d...
Page 20 - DEAlING wItH cookING proBlEMs
20 DEAlING wItH cookING proBlEMs (see also solving problems) problem causes remedies uneven cooking: • Incorrect shelf position. • Oven tray too large. • Trays not centralised. • Air flow in oven uneven. • Grill dish affecting thermostat. – select shelf that puts food in the centre of the oven . – E...
Page 21 - clEANING yoUr ApplIANcE; stainless steel; Glass
21 clEANING yoUr ApplIANcE WARNING! • Always make sure that the oven is electrically isolated before cleaning . this can be done by the functional switch nearby . • Do not line the bottom of the oven with foil or cookware . • Do not use steam cleaners. stainless steel WARNING! • The oven door trim, ...
Page 22 - clEANING yoUr oVEN AccEssorIEs; removing the trays and shelves from
22 clEANING yoUr oVEN AccEssorIEs removing the trays and shelves from your appliance • Slide the dish and grill tray towards you until they reach the front stop . • Tilt them up at the front to clear the side supports, taking care not to spill the contents . • Lift them clear.• Wash the tray and she...
Page 23 - clEANING yoUr oVEN AccEssorIEs (coNtINUED); cleaning your oven door
23 clEANING yoUr oVEN AccEssorIEs (coNtINUED) cleaning your oven door WARNING! • DO NOT use the oven without the inner and middle door glass fitted . • NEVER spray any caustic cleaners on any surface of the door or damage to the surface coatings will result . • DO NOT use metal utensils, scrapers, s...
Page 24 - operation
24 cAtAlytIc lINErs storAGE coMpArtMENt (sElEctED MoDEls) operation the catalytic liners are coated with a specially formulated enamel coating, over a base of regular enamel . this enamel coating has a rough surface which is also porous . During normal cooking, fats and other food spatter is partial...
Page 25 - solVING proBlEMs; faults; further information
25 solVING proBlEMs faults If there is a problem with the oven and / or grill, please:• Check the points listed below before calling for service . It may be possible to avoid a call by fixing the problem yourself – and so continue cooking . NOTE: We may charge for service even in the guarantee perio...
Page 26 - INstAllAtIoN of tHE ApplIANcE; Installing splashback; cabinet requirements
26 INstAllAtIoN of tHE ApplIANcE Installing splashback (Model with hob only) fit splashback to rear of hob with three screws provided . cabinet requirements Model 49669GO-MN is designed to fit into a 900mm wide gap between standard kitchen cabinets . the appliance integrates with the kitchen cabinet...
Page 27 - INstAllAtIoN of tHE ApplIANcE (coNtINUED); freestanding Installation
27 INstAllAtIoN of tHE ApplIANcE (coNtINUED) freestanding Installation 600mm minimum vertical clearance from combustible surfaces 600mm 600mm 900mm NOM 755mm NOM 900mm minimum the freestanding type installation uses the appliance as supplied, and can be fitted in between cabinets, with cabinets on o...
Page 28 - Installation of anti-tilt brackets and hook
28 Hook C L hole location for hook installation 425mm 840mm 376 Measurements are to be adjusted to account for the thickness of any skirting board or tiles coming between the back of the appliance and the wall 194 INstAllAtIoN of tHE ApplIANcE (coNtINUED) freestanding installation (continued) Instal...
Page 29 - to remove the appliance kick panel
29 INstAllAtIoN of tHE ApplIANcE (coNtINUED) slot-in Installation slot-in conversion to convert the free standing appliance to a slot in installation the kick panel provided on the appliance is removed and the appliance is mounted on a plinth . this enables a continuous cupboard kick board to be ins...
Page 30 - Installation of anti-tilt brackets and stops; Installation sequence for freestanding
30 INstAllAtIoN of tHE ApplIANcE (coNtINUED) slot-in installation (continued) Installation of anti-tilt brackets and stops • The brackets are to be secured to the back wall with appropriate fasteners . • The bottom edge of the the brackets rest on the horizontal support surface . • Two stops are to ...
Page 31 - Built-in installation; cabinet construction for built in oven; oven Dimensions
31 INstAllAtIoN of tHE ApplIANcE (coNtINUED) Built-in installation cabinet construction for built in oven for the best integration within a kitchen, install this appliance in a cupboard that gives a flush fit with the surrounding cupboard fronts . a recess of 20mm is ideal . NOTE: Your appliance mus...
Page 32 - Underbench installation
32 INstAllAtIoN of tHE ApplIANcE (coNtINUED) Underbench installation your underbench oven looks best when the control panel is directly under the benchtop . an upper infill panel may be added if the cooktop placed above the benchtop is too deep . *refer to cooktop installation instructions for requi...
Page 33 - wIrING rEqUIrEMENts
33 wIrING rEqUIrEMENts the cooker Must be installed in compliance with:• local regulations, municipal building codes and other statutory regulations . supply cord size required 49669GO-MN: 1 .5mm 2 BE7600061M: 1 .5mm 2 Data plate gives information about rating is located behind the bottom of the ove...
Page 34 - ElEctrIcAl & GAs coNNEctIoN locAtIoNs; installing the gas cooker; Gas pressures; checking piping size
34 ElEctrIcAl & GAs coNNEctIoN locAtIoNs Model 49669Go-MN 168mm 95mm Electrical connection cable 806mm 411mm Gas connection point to regulator Electrical cable entry point installing the gas cooker Gas pressures the following table shows the supply and operating pressures for various gases . Gas...
Page 35 - NAtUrAl GAs coNVErsIoN
35 NAtUrAl GAs coNVErsIoN Model 49669Go-MN this appliance is supplied set up to for lpG usage . a conversion kit is included with the product for natural gas usage . the conversion kit contains 6 injectors and natural gas sticker .please follow the procedure below if a conversion to suit natural gas...
Page 36 - tEstING tHE opErAtIoN of tHE GAs cookEr; checking gas supply
36 tEstING tHE opErAtIoN of tHE GAs cookEr NOTE: You MUST test the cooker after installation, before you hand it over to the customer. You MUST have a manometer and a connecting tube. checking gas supply 1 . turn on the gas supply and the electricity and try to ignite the gas . NOTE: It will take ad...
Page 37 - wArrANty; south Africa
37 wArrANty south Africa for south african 3 year warranty conditions please contact Electrolux customer helpline, 0800 222 825 or download from our website www .aeg .co .za, service & support tab .
