AcuRite 502 - Manual - manualsarea.com

Page 2 - Unpacking Instructions; PRODUCT REGISTRATION; Register online; AcuRite; IMPORTANT

2 Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab ...

Page 4 - Display

4 Features & Benefits Display 10 37 11 12 9 28 29 31 32 30 33 1 3 4 5 7 8 6 2 19 20 21 22 23 25 26 27 24 36 35 38 13 14 16 15 17 18 34 34

Page 6 - Back of Display Unit; BACK OF DISPLAY UNIT; Backlight Dimmer Switch; Integrated Hang Hole

6 Back of Display Unit BACK OF DISPLAY UNIT 1. Backlight Dimmer Switch Adjusts display backlight settings: Off, low, medium, high 2. Integrated Hang Hole for easy wall mounting. 3. Battery Compartment Cover4. A-B-C Switch ID code that must match 5-in-1 sensor’s A-B-C switch to ensure units synchroni...

Page 7 - SETUP; Install or Replace Batteries

7 A B C SETUP 5-in-1 Sensor Setup 1 A-B-C Switch Set to match display unit 2 Install Batteries 4 AA Batteries 3 Rain Gauge Stabilizer Remove and discard Set the A-B-C Switch Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter cho...

Page 8 - Display Unit Setup

8 Set the A-B-C Switch The A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize. Plug-in Power Adapter For the best performance, plug in the ...

Page 10 - Select Measurement Units; “SET UNITS?” is displayed on the Selectable

10 Select Measurement Units To select between standard units (mph, ºF, etc.) or metric units (kph, ºC, etc.):1. Press the up or down arrow buttons until “SET UNITS?” is displayed on the Selectable Category part of the display unit. 2. Press the “ ” button to set the unit preference.3. Press the up o...

Page 11 - Visit us online to view installation photos and; View Video

11 Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and...

Page 12 - INSTALLATION HEIGHT; National Weather Service recommends 33 feet high!; MOUNTING OPTIONS; solar cell facing SOUTH.; Clear Data Collected During Installation; Basic Setup is Complete; SOUTH

12 5-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at a minimum height of 5 feet (1.5 meters) off the ground, in an open area. Higher is better for wind measurements - the National Weather Service recommends 33 feet high! MOUNTING OPTIONS The included mounting bracket is d...

Page 13 - OPERATION; ready for superior weather prediction.; Weather Forecast; personalized for your exact location.; Barometric Pressure; change in pressure so you can monitor the rate of change over time.; Rainfall Event

13 OPERATION Using the Professional Weather CenterLearning Mode Self-Calibrating Forecasting use a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this p...

Page 15 - Troubleshooting

15 Problem Possible Solution No outdoor sensor reception no bars • Relocate the display unit and/or the 5-in-1 sensor. The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communicat...

Page 16 - If your AcuRite product does not operate properly after trying

16 Problem Possible Solution Inaccurate temperature or humidity • Make sure both the display unit and sensor are placed away from heat sources or vents (see p.11). • Make sure both units are positioned away from moisture sources (see p.11). • Make sure sensor is mounted at least 5 ft off the ground....

Page 17 - Display Unit Care; Clean the Sensor; Insect Prevention; Snow & Freezing Weather

17 Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. 5-in-1 Sensor Care Clean the Sensor Clean with a soft damp cloth. Do not use caust...

Page 18 - Calibrate the Rain Gauge; Tips

18 3. Press the up or down arrow buttons to calibrate the data value higher or lower from the actual reading. 4. Press the “ ” button to confirm the calibration adjustment. Note: The “CAL” icon remains illuminated next to calibrated values. Calibrate the Rain Gauge The rain gauge on the 5-in-1 senso...

Page 20 - Limited One Year Warranty; Customer Support; For assistance

20 At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. We recomm...

Page 22 - It’s More than Accurate, it’s; designed to provide you with information you can depend on to

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy-rights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details. Printed in...

AcuRite 502 - Manual

Table of Contents:

Summary

Other AcuRite Models