3Com AP3750 - Manual
3Com AP3750 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Com AP3750 Managed Access Point Features; Kensington Security Slot; inserting a tool into the lock or unlock hole.; Diameter
- Page 3 – External Antenna Connectors; Observing Safety Precautions; to another AP3750 access point.
- Page 4 – Cabling
- Page 6 – Use the mounting template to cut a hole for the Category 5 cable.
- Page 7 – Lock
- Page 8 – Suspended Ceiling Installation — Drop Ceiling Tiles; antenna at least 20 cm from the access point.
- Page 10 – Attach the access point to the mounting bracket.; Junction Box Installation; Remove the mounting bracket from the access point.
- Page 11 – Attach the bracket to the junction box.
- Page 12 – Solid Wall or Ceiling Installation
- Page 14 – Tabletop Installation
- Page 15 – Plug the Category 5 cable into the access point.; Connecting the Access Point to a Switch; Com Wireless LAN Switch and
- Page 16 – Checking the LED Indicators; Radio 2 LED
- Page 17 – Regulatory Information; CAUTION: EXPOSURE TO RADIO FREQUENCY RADIATION
- Page 19 – EUROPE - EU DECLARATION OF CONFORMITY
- Page 21 – Brazil RF Compliance
Quick Start Guide
AP3750 Managed Access Point
3CRWX375075A
1
The 3Com AP3750 Managed Access Point provides IEEE 802.11a and 802.11b/g wireless access to
the network. The access point is designed for use with a 3Com Wireless LAN Switch, and requires
hardware installation only. All configuration for the access point takes place on the 3Com Wireless
LAN Switch.
You must have a wireless switch device to operate the access point. Three WLAN switch devices can
be connected to the access point:
•
3Com WX4400
•
3Com WX1200
•
3Com WXR100
Power is supplied via Power Over Ethernet (PoE). The following 3Com PoE devices supply power to
the access point:
•
3Com PoE Injector
•
3Com 4400PWR PoE Switch
•
3Com Multi-port PoE power supply
•
3Com 5500 Series PoE capable switches
•
3Com WX1200
•
3Com WXR100
About This Guide
This Quick Start Guide describes the basic installation of the access point. It covers the following topics:
•
3Com AP3750 Managed Access Point Features
•
•
Step 1: Unpacking the Access Point
•
Step 2: Preparing for Installation
•
Step 3: Connecting External Antennas
•
Step 4: Mounting the Access Point
•
Step 5: Connecting the Access Point to a Switch
•
Step 6: Configuring the Access Point
•
Step 7: Checking the LED Indicators
10015414-AA_AP3750_QSG.fm Page 1 Tuesday, July 25, 2006 1:59 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3Com AP3750 Managed Access Point Features Kensington Security Slot The access point has a slot for attachment of a Kensington security cable. The cable is not included with the access point but can be ordered separately. Lock and Unlock Holes On one side of the access point there is a lock hole. O...
3 RJ-45 Cable Ports The access point has two RJ-45 ports. Each port provides a 10/100BASE-TX Ethernet connection to a WX switch. The connection can be direct to an WX switch or indirect through an intermediate Layer 2 or Layer 3 network. The access point receives power and data through the RJ-45 por...
4 1 Unpacking the Access Point Make sure that you have the following items, which are included with the access point: • Mounting Kit: • One universal mounting bracket (attached to the access point) • One paper mounting template (used for marking cutting areas and screw holes) • One two-piece 14.2-mm...
