Zyxel P-334WT - Manual - manualsarea.com

Page 2 - Introducing the Prestige; User’s Guide; Internet Account Information; Procedure to View a Product’s Certification(s); Select the certification you wish to view from this page.

P-334WT 2 1 Introducing the Prestige The Prestige is a broadband sharing gateway with a built-in wireless LAN access point and four-port 10/100 Mbps switch that makes it easy for people to set up a small home/office network and share Internet access via a broadband (cable/DSL) modem. Key features of...

Page 3 - Hardware Installation

P-334WT 3 2 Hardware Installation 2.1 Rear Panel LABEL DESCRIPTION LAN 10/100M Use an Ethernet cable to connect at least one computer for initial Prestige configuration. These ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-sensing (automatically adjust to the type of Ethernet cab...

Page 4 - Front Panel LEDs; The; PWR; LEDs turn on if they are properly connected.

P-334WT 4 2.2 Front Panel LEDs The PWR LED blinks while performing system testing and then stays on if the testing is successful. The LAN , and WAN LEDs turn on if they are properly connected. LED STATUS COLOR DESCRIPTION Off The Prestige is not receiving power. Amber On Power to the Prestige is too...

Page 5 - Set Up Your Computer’s IP Address; Setting

P-334WT 5 LED STATUS COLOR DESCRIPTION Blinking The Prestige is sending/receiving data Off The WAN connection is not ready, or has failed. On The Prestige has a successful 10Mb WAN connection. Green Blinking The Prestige is sending/receiving data On The Prestige has a successful 100Mb Ethernet conne...

Page 7 - Local Area Connection Properties; Internet Protocol Properties

P-334WT 7 4. Select Internet Protocol (TCP/IP) and then click Properties . Local Area Connection Properties 5. Select Use the following IP Address and fill in an IP address (between 192.168.1.3 and 192.168.1.254). 6. Type 255.255.255.0 as the Subnet mask . 7. Click Advanced . 1 Internet Protocol Pro...

Page 8 - Advanced TCP/IP Settings; Checking/Updating Your Computer’s IP Address; Testing the Connection to the Prestige

P-334WT 8 Advanced TCP/IP Settings 9. Click OK to close the Internet Protocol (TCP/IP) Properties window. 10. Click Close ( OK in Windows 2000/NT) to close the Local Area Connection Properties window. 11. Close the Network Connections window (Network and Dial-up Connections in Windows 2000/NT). 3.2 ...

Page 9 - Your computer can now communicate with the Prestige via the; ETHERNET; Configuring Your Prestige; Quick; you how to use the web configurator setup wizard and; for background; Web Configurator; Accessing Your Prestige Via Web Configurator; Login; to proceed to a screen asking you to change your password. Click; Reset; to revert to the

P-334WT 9 3. Press ENTER . The following screen displays. Your computer can now communicate with the Prestige via the ETHERNET port. 4 Configuring Your Prestige Choose one of these methods to access and configure the Prestige. This Quick Start Guide shows you how to use the web configurator setup wi...

Page 11 - Internet Access Using the Wizard

P-334WT 11 Click MAINTENANCE in the navigation panel to see Prestige performance statistics, upload firmware and back up, restore or upload a configuration file. Click LOGOUT when you have finished a Prestige management session. The Prestige automatically logs you out if it is left idle for five min...

Page 12 - Use the second wizard screen to set up the wireless LAN.; Choose

P-334WT 12 System Name is a unique name to identify the Prestige in an Ethernet network. Enter a descriptive name. The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this blank, the domain name obtained by DHCP from the ISP is used. Click Next to continue. 2. Us...

Page 14 - to go to the

P-334WT 14 Choose Ethernet when the WAN port is used as a regular Ethernet. Choose from Standard , Telia Login or a RoadRunner version. You’ll need User Name , Password and Login Server IP Address for some Roadrunner versions. PPPoE or Point-to-Point Protocol over Ethernet ( PPP over Ethernet ) also...

Page 15 - This is the final wizard screen you need to configure. Select the; Yes; radio button and click; Finish; to

P-334WT 15 WAN IP Address Assignment Select Get automatically from ISP if your ISP did not assign you a fixed IP address. Select Use fixed IP address to give the Prestige a fixed, unique IP address. The fixed IP address should be in the same subnet as your broadband modem or router. Enter a Subnet M...

Page 16 - Confirm Your Settings; Using the Bandwidth Management Wizard; Click; BM SETUP; in the main menu to display the first wizard screen.

P-334WT 16 OTIST Security You can assign the Prestige wireless security settings (SSID and either the WEP or WPA-PSK) to a ZyXEL wireless client that also supports OTIST. You must enable OTIST on the wireless client to have the Prestige’s wireless security settings assigned to it. Select the Yes rad...

Page 18 - Test Your Internet Connection; Troubleshooting

P-334WT 18 Select High , Mid or Low priority for each service to have your Prestige limit the bandwidth used by bandwidth-hungry applications (or individuals) by allocating the maximum bandwidth for WAN, LAN and WLAN traffic. If the rules set up in this wizard are changed in the advanced setup, then...

Zyxel P-334WT - Manual

Table of Contents:

Summary

Other Zyxel Models