ZTE MF286D - Quick Guide

8 Cable Broadband Mode Your device supports the cable broadband mode and you can use this service from your service provider to access the Internet. 1. Connect the WAN/LAN1 port and the broadband service network port with a network cable. 2. Log in to the 4G CPE configuration web page. 3. Change the...

9 Telephone Function Your device supports the telephone function. Before using the telephone function, connect the telephone and insert the (U)SIM card. To make a call: 1. Pick up the handset. 2. Dial the telephone number. 3. Wait for the call to be connected.

10 WPS Function Your device supports the WPS function. You can use this function to connect a client to your device. 1. Press the WPS button on your device to activate the WPS function. 2. Enable the WPS function on your client. 3. Follow the system prompts on your client to establish the connection...

13 Troubleshooting Voice Related Problems Symptoms Possible Problems / Solutions There is no dial tone. • Please wait for 1~2 minutes after the device is turned on. • If signal strength is weak, you have no good RF reception. Change the location of the device. There is a prompt / phone alert / annou...

14 Symptoms Possible Problems / Solutions After dialing the last digit I hear nothing/silence. When you have finished dialing you can press the # key or wait 4~8 seconds to connect the call. Internet Related Problems Symptoms Possible Problems / Solutions I cannot access the Internet at all. • Pleas...

15 Symptoms Possible Problems / Solutions I cannot establish the Wi- Fi connection between my device and the client. • Make sure the Wi-Fi function is active. • Refresh network list and select the correct SSID. • Check the IP address to make sure your client can obtain an IP address automatically in...

16 Getting More Help You can get help by: • Sending an email to [email protected] • Visiting https://www.ztedevices.com LEGAL INFORMATION Copyright © 2021 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, elec...

17 Warning and Notice Safety Precautions • Some electronic devices may be susceptible to electromagnetic interference. Locate the device away from TV set, radio and other electronic equipment to avoid electromagnetic interference. • The device may interfere with medical devices like hearing aids and...

19 iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product. iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, and actions of third parties o...

20 RF Exposure This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Specification This radio equipment operates with the following freque...

21 Disposal of Your Old Appliance 1. When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated coll...

22 UKCA DECLARATION OF CONFORMITY Hereby, ZTE Corporation declares that the radio equipment type ZTE MF286D is in compliance with Radio Equipment Regulations 2017. The full text of the UKCA declaration of conformity is available at the following Internet address: https://certification.ztedevices.com...