ZLINE Kitchen and Bath RBIV-60 - User Manual

Page 4 - DUAL INSTALLATION COMPONENTS; Adhesive Foam Divider; INSTALLATION; Pr

1 DUAL INSTALLATION COMPONENTS " ! !"#$%&'()#$$#)&*'%+*,-*'.')( !"#$%&'() *+,-./--.012- 03& 4)&563'7$883) 8(9 +3& 4)&563'7%(:3) *;,-./0.2< ;3& #5)3: =/.0< ;- >3"'3)7')?9 8@5 0 Adhesive Foam Divider Metal Lower Bracket Divider Trim Plastic Uppe...

Page 5 - Tools and P

2 TOOLS AND PARTS Part Image Description Quantity Adhesive Foam Divider 1/8” x 15 3/4" x 68 7/8" 1 Plastic Upper Bracket 1/8” x 2" x 4 1/2" 3 Metal Lower Bracket 1/16" x 1 5/8" x 2 1/4" 2 Screw Phillips head 20 Center Trim 73 3/4" long 1 INSTALLATION 2 Tools and P ar ...

Page 6 - ATTACH THE ADHESIVE FOAM DIVIDER

3 At tach th e Adh esive F oam Divider INSTALLATION ATTACH THE ADHESIVE FOAM DIVIDER 1. Approach the refrigerators from behind and angle one of them out.2. Next, measure 2 1/8” from both the top and left corner of the side of the unit.3. Using a level, ensure the divider remains parallel to the edge...

Page 7 - Mount Br

4 INSTALLATION Mount Br ackets MOUNT UPPER BRACKETS AND LOWER BACK BRACKET TO CONNECT THEREFRIGERATORS 1. On the back of one unit near the top, find the location for one plastic mounting bracket and screw into place with two screws, ensuring the small arm is pointed in. 2. Move to the top of the uni...

Page 8 - they will be installed.

5 Connect Br ack ets INSTALLATION CONNECT UPPER BRACKETS TO CONNECT THE REFRIGERATORS1. Realign both refrigerators so they are flush and line up with the opening where they will be installed. 2. Finish installing the plastic mounting bracket on the back with the other two screws to connect both unit...

Page 9 - Scan the QR code to watch an installation video.

6 Install Divider T rim INSTALL DIVIDER TRIMAfter ensuring both units are in alignment and everything is level, insert divider trim between both units and lightly pound into place with the back of your fist. ' ! 1'2'()*% .')./%)/&,%0.)3..'%/.5/&6./#)*/( A BH'3)79&6?"E7#$)37'C&'7'...

Page 10 - Push Into Place

7 Push Into Place PUSH INTO PLACE1. Before pushing into place, install the necessary power and water connections (refer to your RBIV-30 installation manual). 2. Uninstall the door on the left unit and reorientate the inside drawers and hinges so the handle to the door pulls out to the left — opposit...

Page 11 - The front and rear legs have a maximum height adjustment of

8 Leveling R efriger ators LEVELING REFRIGERATORS1. After pushing the dual unit into the cabinet, the feet need to be raised in order to secure the product to the anti-tip brackets provided with the RBIV-30 installation kit. 2. Raise the front feet first to reduce risk of the product falling frontwa...

Page 12 - Installation Completion

9 Installation Completion INSTALLATION INSTALLATION COMPLETERefer to your RBIV-30 installation manual as needed for other installation procedures. * ! 7*,-$.)&*'%&'()#$$#)&*' A >(98%3'37?"#'&%%&'?("75("H3)7'(78)3@?($#78&E3#7)3E&)D?"E7&#7('C3)7?"...

ZLINE Kitchen and Bath RBIV-60 - User Manual

Table of Contents:

Summary

Other ZLINE Kitchen and Bath Refrigerators Models