ZLINE Kitchen and Bath DW-ORB-24 - User Manual

7 This warranty is valid in the United States. It is non-transferable and applies only to the purchaser and does not extend to subsequent owners of this product, any applicable implied warranties, including the warranty of merchantability are limited in duration to a period of express warranty as pr...

1 Read all instructions before installing and operating this appliance. The installation instructions in this manual are intended for qualified installers, service technicians, or persons with similar qualified background. Installation and electrical wiring must be done by qualified professionals an...

3 Button functions Power: Turn ON/OFF the range hood and activate power-off delay timer. Light: Turn ON/OFF (Some models will have bright, dim, and OFF settings.)Blower Speed Indicator: Shows current blower (motor) speed (1-4). 1 - Low Speed: Light frying/boiling. 2 - Medium Speed: Frying/wok cookin...

4 Wall Range Hood Installation Installation Tutorial Video

5 A B C D 6 E F Please unpack your range hood when it is delivered and inspect to ensure all parts are included. Parts Supplied 1. Main Hood with All Lights and Button 5. Flexible Duct (for 6” or 8”) Banks Pre-Installed 6. Packet of Screws and Anchors 2. Adjustable Stainless Steel Chimney Cover 7. T...

9 If using a crown molding, follow instructions before attaching ducting and chimney sections. Step 1 Attach crown molding bracket to ceiling using hardware provided. Step 2 Attach ducting and electrical connections. Step 3 Attach chimney sections to the range hood, then connect to crown molding bra...

10 Electric Power Rating Frequency: 110V/50 HzPower: 10W Step 1 Attach crown molding bracket to ceiling using hardware provided. Figure 1 Step 2 Attach ducting and electrical connections. Plug the speakers into an outlet behind the chimney. When the connection is successful, a chime will sound. Figu...

12 Designer Wall Range Hood Installation Installation Tutorial Video

17 Island Range Hood Installation Installation Tutorial Video

18 Please unpack your range hood when it is delivered and inspect to ensure all parts are included. Parts Supplied 1. Main Hood with All Lights and Button 6. Packet of Screws and Anchors Banks Pre-Installed 7. Top Mounting Bracket 2. Chimney 8. Crown Molding Bracket 3. Transition Piece (for 6” or 8”...

21 Installation Tutorial Video Designer Island Hood Installation

25 Under cabinet Installation Installation Tutorial Video

27 Under cabinet Installation Step 5 Draw electrical wires through cabinet access opening, center the hood beneath the cabinet. Step 6 Align hood-mounting brackets to the screws on the wall and hook hood into place. Tighten screws to secure hood to the wall. Step 7 Connect ducting.

28 If you need to convert your under cabinet range hood to rear ducting, use the following instructions. Please note that converting the undercab to rear ducting is a modification of the standard hood and part of the installation process. It is recommended that the hood is inspected before this proc...

29 Range Hood Insert Installation Installation Tutorial Video

30 When installing a range hood insert, it is recommended to install the unit at a minimum of 30˝ from the cooktop. For outdoor range hood inserts it is recommended to install the unit at a minimum of 36˝ from the grill top. Step 1 Unpack contents of the hood. Attach transition piece and ducting to ...

31 When installing your new remote blower type range hood, follow the instructions for the type of hood you are installing. Remote blowers are available with wall, island, under cabinet, and insert range hoods. Make certain to connect the electrical cord to the hood and plug the blower motor in to t...

33 How to Change Parts How to Change Out the Button Panel 1. Remove baffle/aluminum filters. 2. Locate back of button panel. 3. Remove screws from each side of the button panel. 4. Disconnect button panel from cord connecting to circuit board. Note: Never work on or clean the range hood while power ...

34 How to Change Parts How to Replace the Circuit Board: 1. Turn the power off at the breaker and unplug the Range Hood. 2. Remove all screws from the top of the circuit board cover. 3. Take a picture of the wiring layout (this will help you put the circuit board back together properly).4. Remove th...

35 How to Change Parts Replacing the Light Bulbs in Your Range Hood: 1. Remove baffles. 2. Squeeze the old LED light casting out until it falls out of the socket.3. Disconnect the plug wires from the light wire.7. Reconnect the LED plug into the light wire.8. Press light assembly into the socket. No...

36 Professional Series Baffle Filter Change: Covering Models 696, 697, 697i (Island), KECOM, KECOMi (Island), 695, 698, and 721 Inserts Professional series hoods are equipped with 2 removable dishwasher safe baffle channels (one for series 695 and 698 inserts) that the baffle filters rest in. To ins...

38 How to Change Parts Change/Replace Capacitor: 1. Remove screws from the circuit board cover. 2. Remove screws from compactor. 3. Remove both wired connections from the capacitor. 4. Connect new capacitor with wire connectors.5. Replace screws in cover. 6. Repeat operation if dual motor. Note: Som...

41 Replace or Change Transformer: 1. Remove the screws from the transformer.2. Remove the two connections to the lights.3. Remove the two wired connections from the circuit board (you must remove the circuit board cover). 4. Install the new connections from your new transformer (be certain the corre...

42 How to Change Parts Single Motor Electrical Diagram:

43 How to Change Parts Dual Motor Electrical Diagram:

44 Where are ZLINE products manufactured? All ZLINE products are manufactured in ZLINE facilities overseas, including: Germany, Italy, and China. Are ZLINE range hoods considered type 1 or type 2? Type 1 - Range hoods that are used with appliances that produce grease and smoke. Are ZLINE products me...

45 Troubleshooting and FAQ No Power 1. Check electrical connections. 2. Check that all connections to the circuit board are secure. 3. If problem still exists, the circuit board needs to be replaced. How loud is the range hood? A sone is measure of loudness, the higher the sone rating, the louder th...

47 Troubleshooting and FAQ My hood is operating, but the air is moving slower than normal. Check the filter for buildup and clean or replace it if needed. If the difficulty still persists, check for obstructions in the ductwork. A common obstruction is buildup in the roof or wall cap, such as: bird ...

48 How many devices can the Bluetooth speakers sync to at a time? Only 1 device can sync at a time. What is the decibel rating of the Bluetooth speakers? Up to 100 decibels. What is the range of the speakers? What’s the maximum distance for the connection to work? Up to 50 feet. If the connection is...

49 Hood Is Not Pulling Was the unit plugged in and was the fan checked before installation? What distance is the hood mounted above the cook top? Indoor (30”-36”), outdoor (36”-40”) Is the range hood width the correct size for the cook top? Outdoor units should be at least 1 size larger, if not 2 Do...

50 Noisy Motor Were the fan speeds checked fan speeds prior to installation? Is the ducting clear? Check to make sure motor is attached to housing Is the 6” back draft damper on transition piece functioning properly (760 CFM hood?) Does it open when the hood is engaged? If it is stuck, it will sound...

Kitchen and Bath Three Locations: 350 Parr Circle Reno, NV 89512 916 Delaware Avenue Marysville, OH 43040 319 Rowland Mill Road Bruceton, TN 38317 www.zlinekitchen.com 1-614-777-5004