Zephyr APN-M90ABX - Manual - manualsarea.com

Page 4 - READ AND SAVE THESE INSTRUCTIONS; fe

www.zephyronline.com IMPORTANT SAFETY INSTRUCTIONS FOR RESIDENTIAL USE ONLY READ AND SAVE THESE INSTRUCTIONS PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING. IMPORTANT : Save these Instructions for the Local Electrical Inspectors use. INSTALLER : Please leave these Instructions with this unit for ...

Page 9 - front of hood

Hood Specifi ca tions front of hood side of hood top of hood - 9 -

Page 10 - Remove the 6” round metal knockout

www.zephyronline.com Installa tion - In ternal Blo w e r The following instructions are for installing the internal blower. CAUTION: To reduce the risk of fi re and electric shock, install this range-hood only with internal blower models MT-017 provided with the kit cod CBI-600A. For external and in...

Page 11 - Installa

6. Attach the 6 pin male molex connector from blower wire to the 6 pin female molex connector located inside the blower housing. See Fig.6 7. Install blower and blower plate into blower housing by following the reverse instructions from step 2. See Fig.7 8. Connect 9 pin male molex connector from bl...

Page 13 - Note; : Carry out the power supplly connection in

6. Insert the 6 pin female molex connector into the junction box. See Fig. 6A. Secure remote blower junction box to top of blower housing using (2) screws. See Fig. 6B 7. Feed remote blower wire harness through remote blower junction box cover and Connect the wires with those inside the junction box...

Page 14 - WARNING FIRE HAZARD; Use single wall rigid Metal ductwork only.

www.zephyronline.com WARNING FIRE HAZARD NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside, unless using the recirculating op-tion. Use single wall rigid Metal ductwork only. Fasten all connections ...

Page 15 - MOUNTING HEIGHTS; Place the paper template included with your

Installa tion - Moun ting the R ange Hood MOUNTING HEIGHTS The range hood must be installed at a minimum eight of 24 inches (71cm) from the cooking surface. If a connecting duct work composed of two parts is used, the upper part must be placed outside the lower part. Do not connect he range hood duc...

Page 17 - MOUNTING THE DUCT COVER

MOUNTING THE DUCT COVER 1. Install the electrical wiring and test hood for functions prior to installing the duct covers. 2. If using hood in air recirculating mode make sure to install the air diverter plate prior to mounting the duct covers. See the manual included with the recirculating kit for m...

Page 18 - MAINTENANCE

www.zephyronline.com Main tencanc e MAINTENANCE • It is recommended to operate the appliance prior to cooking. It is recommended to leave the appliance in operation for 5 minutes after cooking is completed in order to completely eliminate cooking vapors and odors. The proper function of the range ho...

Page 19 - DESCRIPTION; OPTIONAL ACCESSORIES; Recirculating Kit

List of P a rts and A cc essories DESCRIPTION HOOD PART# REPLACEMENT PARTS Light Bulb GU4, 20W (each) APN Z0B0030 OPTIONAL ACCESSORIES Recirculating Kit APN ZRC-00PN Replacement Charcoal Filters APN Z0F-00AC Duct Cover Extension APN Z1C-00PN To order parts, visit us online at http://store.zephyronli...

Zephyr APN-M90ABX - Manual

Table of Contents:

Summary

Other Zephyr Models