Page 2 - Contents; Technical specifications
2 Important safety information 3 Description of the appliance 3 The control panel 4 Before use 5 Setting the water softener 5 Rinse aid 6 Use of detergent 7 Using your appliance 8 Loading your appliance 8 Adjusting the height of the upper basket 8 Hints and tips 9 Washing programmes 10 Operating seq...
Page 3 - Important safety information
3 It is most important that this instruction book should be retained with the appliance for future reference. Should theappliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure thatthe book is left with the appliance in order that the new own...
Page 4 - Programme selection push buttons; Phase indicator lights; The control panel
4 1. ON-OFF indicator light 2. ON-OFF push button 3. Door handle 4. Programme selection push buttons 5. Indicator lights Phase indicator lights Washing phaseilluminates when the washing phase is running Drying phaseilluminates when the drying phase is running End of programmeilluminates when the was...
Page 5 - Setting the water softener; Before use
5 Before using your dishwasher for thefirst time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fi...
Page 7 - Adjusting the dose; Use of detergent; If using powder detergents proceed as follows:; Compact detergents with enzymes
7 4. Press the NORMAL push button again, the end of programme indicator light turns off, this means that the rinse aid indicator light has been deactivated. 5. To memorise the operation, switch off the dishwasher by pressing the ON-OFF push button. To reactivate the rinse aid indicator light follow ...
Page 8 - Removable knife basket; The upper basket; Using your appliance
8 Loading your appliance Before placing dishes in the machine, remove any scraps offood, to avoid clogging the filters and consequently reducingthe performance. Do not load very small items which can fall through thebaskets. Open the door and slide out the baskets to load the dishes. The lower baske...
Page 9 - To save energy; For best washing results
9 To save energy Place dishes in the machine immediately after every meal andwait until the dishwasher is full before washing.Do not prewash dishes under running water.Select the QUICK A 30 I programme when dishes are not very soiled, following the instructions given in the "Washingprogrammes...
Page 10 - Washing programmes
10 * Ideal for washing a complete load of 12 place settings with normal soil. Characterised by a duration of about 80 minutes and a washing temperature of 70°C. The time value is approximate and depends on the pressure and the temperature of the water and also by the variations of the power supply. ...
Page 11 - Operating sequence
11 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the ON-OFF push button The ON-OFF indicator light will come on. 3. Check that there is rinse aid and salt The corresponding indicator lights will illuminate if refilling is necess...
Page 12 - Maintenance and cleaning
12 Internal cleaning Ensure that the seals around the door, the detergent and rinseaid dispensers are cleaned regularly with a damp cloth.We recommend the use of Finish Dishwasher Cleaner every 3months or run a 65°C wash without dishes using detergent.Regular use of Finish Dishwasher Cleaner cleans ...
Page 13 - Something not working
Symptom Fault code Solution The machine will not start ● The door has not been properly closed. ● The plug is not properly inserted in the power socket. ● There is a power failure. The machine does not fill "Washing" phase ● Ensure the water tap is open. with water indicator light ● Ensure t...
Page 14 - Protection against flooding; Service and Spare Parts
14 If after all these checks, the problem persists, contact yourlocal Service Force Centre, quoting the model and serialnumber. This information can be found on the rating plate located onthe right hand side of thedishwasher door (seepicture). Protection against flooding The machine is fitted with a...
Page 15 - Guarantee Conditions
15 Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date ofpurchase this Zanussi appliance or any part thereof is provedto be defective by reason only of faulty workmanship ormaterials, we will, at our option repair or replace the sameFREE OF CHARGE for labour, ma...
Page 16 - Hints for test centres
16 Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Hints for test centres Test standard EN 50242 Reference programme: Economy 50°C Load: 12 standard place settings Rinse aid selector: position 5 Detergent dosage : 1...
Page 17 - Water supply connections; Water outlet hose connection; Installation instructions
17 Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. Any plumbing work required to install this applianceshould be carried out by a qualified plumber or competentperson. Remove all packaging before positioning the machine. If p...
Page 18 - Electrical connection; Fitting under a counter
18 Electrical connection This appliance must be earthed.The manufacturer declines any responsibility should thissafety measure not be observed. If the plug that is fitted to your appliance is not suitable for thesocket, it must be cut off and the appropriate plug fitted. ImportantThe wires on the ma...
